Used Hole Punching Tool for sale (39,239)

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Distance between upper and lower bracket: 12 mm Punch shank: Ø 7 mm Die outer diameter: Ø 20 mm Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring - Mounting slot 50 x 14 mm and 8 mm locating pin Bdedpfsxbh N Hex Acvja Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Weight: 3.7 kg Good condition 13 pieces available, price per piece

Condition: used, Punching bracket, punching unit SUPRA-CLAP / CEWE Type PAE 50 - 400 3GN 3P1 Throat depth: 400 mm Punching capacity: max. 10 mm material thickness Hole diameter: max. Ø 50 mm Distance between upper and lower bracket: 19 mm Punch holder: Ø 78 mm Cutting plate outer diameter: Ø 78 mm Cutting plate thickness: 20 mm Drop-out opening in punching bracket: 52 mm Installation height: approx. 220 mm - Punch holder as a punch unit with punch mount and material stripper with disc springs - Punch holder rotation-proof guided and spring-loaded - Punch length 97 mm, shank Ø 35 / 50 mm - Round hole tool: punch Ø 41 mm and die Ø 41.5 mm - Long fixing hole: 270 x 13.5 mm Dimensions of punching bracket (L x W x H): 550 x 95 x 220 mm Weight: 27.5 kg Good condition Bdodpfxexbh N Ts Acvea 4 units available, price per unit 3 units with Ø 41 mm punch tool 1 unit with Ø 43 mm punch tool

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Bsdpfxjltrmuj Acvjda Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Punching Bracket, Punching Unit SUPRA-CLAP Type C12.300 Throat Depth: 300 mm Punching Capacity: 0.3 to 2 mm material thickness, depending on cutting clearance Hole Diameter: Ø 2 to Ø 12 mm Distance between lower die and punch holder: 8.5 mm Distance between upper and lower bracket: 13 mm Punch Shank Diameter: Ø 12 mm Cutting Plate Outer Diameter: Ø 30 mm Cutting Plate Thickness: 12 mm Drop-through Opening in Punching Bracket: 14.5 mm Installation Height: approx. 145 mm - Standard punch length 70 mm with 60° head (Punch per DIN 9861 Form C) Bdedpfx Acsxbh Rdjvja - Punch holder with spring stripper and return spring - Mounting slot 50 x 13.5 mm and 8 mm locating pin Punching Bracket Dimensions (L x W x H): 390 x 36 x 145 mm Weight: 4 kg Good condition 9 units available, price per unit 3 units with tool inserts (punch + die) 6 units without tool inserts (without punch + without die)

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation Bsdpjtv Hzvsfx Acveda

Condition: good (used), machine/vehicle number: 550C08, A used punching PEDDINGHAUS with large throat and large plate with attacks Cutting capacity 45 tonnes Bdodpfjd Hxrtsx Acvea Stroke rate 40 strokes/min Projection 762mm Arbeitshöte 1110mm

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Bjdpfx Aew Tri Nocvoda Exact details can be found in the PDF.

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Bjdpjw Trkaefx Acvoda

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Bjdpfx Acjw Trkgovsda Exact details can be found in the PDF.

Condition: used, Offer 41414 Bsdoxhfhmepfx Acveda Guide unit for punching tool suitable for AMADA type EMK 3612

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Technical data approx: - Pressure capacity 30 T. - max. sheet thickness 10 mm - max. punching diameter 105 mm - punching capacity - e.g. steel sheet : 105 mm in 1,5 mm ; 45 mm in 5 mm - e.g. VA - sheet metal : 90 mm in 1,5 mm ; 45 mm in 4 mm - stroke 7 - 70 mm Bdsdpjlnkc Usfx Acvoa - throat 560 mm - maximum stroke rate 120 H/min - single stroke / continuous stroke - drive 400 V / 4 kW - space requirement approx. W 8000 x H 1850 x D 1700 mm - weight approx. 1900 kg - with: - stop table with stops - foot switch; - emergency stop button - punch quick change device - various receptacles for punches and dies

Year of construction: 2019, condition: good (used), machine/vehicle number: 157, Offer 22273 Technical data: - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - weight approx. 70 kg Bodpfx Acsiv Hz Dsveda - with: - foot switch - machine base mobile W 600 x H 830 mm - Div. tools HUECK

Year of construction: 1982, condition: good (used), machine/vehicle number: 0155282778711, OFFER 21455 Technical data: - Pressure capacity 450 KN - punches e.g. up to 25 mm Ø in steel 15 mm - stroke infinitely variable 0 to 60 mm - stroke rate approx. 16 to 47 1/min - throat 760 mm - Installation height 215 mm - working height 1150 mm - Drive 400 V / 7,5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg Bdsdehkr Daopfx Acvea - with: - E. foot switch - 20 pieces div. hole punches + dies

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW Bedopuy H Dopfx Acvoda - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg Bdedpfx Aoit T Hyecvja

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Bdodpfx Aorll I Ujcvja Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm - Max. punching diameter 105 mm - stroke 42 mm - throat 700 mm - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device - foot switch; Bdjdpfxjrgptij Acvoa - Emergency stop button - Various punches + dies in separate workbench

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Bdjdpfsxyy Aijx Acvoa Machine weight with throat depth 500: 1150 kg

Condition: ready for operation (used), Schüco Tool Pressing Tool Punching Tool, Item No.293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05 and 5pc. Without number Bjdpfx Aed Sc D Sjcvoda

Condition: good (used), Year of construction: 1995, Technical data: - Pressure capacity 250 KN - max. sheet thickness 6 mm Bdedpfx Acohikdajvja - max. punching diameter 90 mm - stroke 42 mm - throat 500 mm - maximum stroke rate 200 H/min - connected load 4 kW - space requirement LxWxH 1000 x H 1750 x D 1400 mm - weight approx. 1600 kg

Condition: like new (used), Year of construction: 2012, 🔩 Universal Steelworker / Ironworker Machine – 80 Ton Punching Capacity This robust and versatile steelworker is engineered for demanding steel fabrication applications, combining punching, shearing, notching, and profile cutting in a single, powerful unit. With 80 tons of punching force and multiple dedicated workstations, it ensures efficient and precise steel processing across a wide range of tasks. 🧰 Punching Station - Punching force: 80 tons - Max. punching capacity: 28 × 20 mm - Max. hole diameter × thickness: 57 × 10 mm - Stroke length: 55 mm - Number of strokes (20 mm stroke): 25 / min - Throat depth: 305 mm (optionally up to 625 mm) - Max. hole diameter: 57 mm (up to 160 mm with enlarged throat) - Working height: 1087 mm 📏 Flat Steel Shearing - Maximum thickness: 300 × 20 mm - Maximum width: 450 × 15 mm - Blade length: 483 mm - Working height: 890 mm 🧱 Section & Angle Cutting - At 90°: 150 × 150 × 13 mm Bedpfoxtxcbjx Acveda - At 45°: 70 × 70 × 10 mm - Working height: 1155 mm 🔹 Bar Shearing - Round bar: Ø 45 mm - Square bar: 45 × 45 mm - Working height: 1175 mm ✂️ Notching Station - Material thickness: 12 mm - Width: 40 mm - Rectangular notch: 40 × 90 × 12 mm - Triangular notch: 60 × 60 × 12 mm - Working height: 890 mm ⚙️ General Data - Motor power: 7.5 kW - Dimensions (W × D × H): 1760 × 710 × 1830 mm - Weight: approx. 2000 kg ✅ Key Benefits - Multiple workstations for punching, notching, and shearing - High efficiency with up to 25 strokes per minute - Heavy-duty construction for long-term durability and accuracy - Ideal for workshops, steel fabrication plants, and maintenance departments

Condition: new, Cluster tool C/D/E station thick turret punch tool for Amada, Lvd Original style punch compatiable for Amada/Mate guide holder quick adjustable style compatiable for Mate/Wilson 90 guide holder Bsdpoiq Dmmofx Acvjda

Condition: new, Cluster tool for Trumpf punch Bdedpoiq Dmxofx Acvsa

Condition: new, E station thick turret punch tool for Amada, Lvd Original style punch compatiable for Amada/Mate guide holder quick adjustable style compatiable for Mate/Wilson 90 guide holder Bdodjiq Di Ajpfx Acvja

Condition: excellent (used), For sale: A set of professional SK40 tool holders in Ø12 size, brands HOLEX and Orion. All tool holders are manufactured according to DIN 69871 AD/B and are intended for CNC machining centers. Technical specifications: • Taper: SK40 • Clamping diameter: Ø12 mm • Length: 100 mm • Specification: DIN 69871 AD/B • Manufacturer: HOLEX and Orion • Condition: used, functional, in good condition (visible signs of use, do not affect functionality) Applications: • End mills Ø12 • Drills Ø12 • Countersinks Ø12 Bdsdpfx Asxcy Ttjcvja