HIGH FREQUENCY GENERATOR

ELETTRONICA CAVALLO GAF 50 KW

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: Hjdpfsua Tbwex Akijw The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Grooving parquet machine ZEFIRO - automatic producing of the grooves on the plywood back side of parquet boards. Useful length 2400 mm. Entry belt conveyor included. Hjdpfxsx Rrqvo Akiow

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker Hodpfx Ast Rmhajkiow - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Hodpfx Aow I E Dpjkiew

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm blade shaft Ø: 165 mm speed: max. 150 m/min Hjdpfx Asd Ha Hmekijw

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Hedpfxsw I E Dvj Akiow

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Hjdpjvrfivofx Akisw Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Hedpek Nm Nrjfx Akiew

Condition: used, x x x dismantled x +++++ Hodpfx Ajip Rdljkiew Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), loading space volume: 54 m³, Year of construction: 2002, Hüffermann LL101s/Roll-off Container 54 cbm/5 UNITS AVAILABLE • Manufacturer: Hüffermann • Model: LL101s • Year of manufacture: 2002 • Unladen weight: 3,900 kg • Permissible total weight: 15,000 kg • Nominal capacity: 54 cbm • Internal dimensions: 7.4 m x 2.42 m x 2.95 m • External dimensions: 7.52 m x 2.55 m x 3.185 m • Floor: 3 mm S235 steel sheet • Sides: 3 mm S235 steel sheet • Rear side: 3 mm S235 steel sheet Hsdpfx Akewaap Ejijw • Doors: twin-leaf • External colour: RAL 1226