Used High Speed Press for sale (62,800)

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Gear ratio 1:6 Max. speed 15,000 rpm Bjdpfxjwz I Tbs Abbjlr Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1979, The machine is in very good condition, equipped with a digital display, and immediately available. Radial drilling machine Maximum height: 2,800 mm Maximum radius: 3,500 mm Bodpfoxq Rzqox Abbslr Spindle: 130 mm Maximum drilling diameter: 72 mm Table: 6,500 x 4,000 mm

Condition: excellent (used), Year of construction: 2013, Heidenheim TNC 530, SK 40, 12,000 rpm, 40 tool positions, through-spindle coolant, direct measuring system on all axes, central lubrication system, automatic loading doors, measuring probe, Bledjxfqyvspfx Abbor

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle Blodsquhbgopfx Abber - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: new, Year of construction: 2025, PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40L (vertical) PRO-version and AMTEC Shrink Wrapper SIDEshrink W60XL PRO-version. Conveyor speed: 0-30m/min. Adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Max. product dimensions: L(unlimited)xW400xH300mm; tunnel size: L1700xW450xH350mm; machine dimensions: L2200xW1000xH1330mm; power consumption: 380V, 16kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bljdpfov Nl Uysx Abber

Condition: used, - second hand - location: Bremen - Total width: 1.950 mm - Total depth: 1.050 mm Blodpolyqccjfx Abber - Total height: 1.400 mm - Hot mixer: approx. 10 liters - 5.5 kW - Cold mixer: approx. 25 liters - 2.2 kW - Hot mixer flange closure may be missing and would need to be replaced on site

Condition: ready for operation (used), Technical characteristics 150 bar hydraulic unit useful dimensions 2600 mm x 1000 mm 6 horizontal single-acting jacks with flat or edge locking (clamping high parts) 2 vertical hydraulic pressers high frequency unit for rapid setting of glued assemblies 3 zone hydraulic control ideal for frames, panels, furniture element frames, stairs, fixtures Power and Motors Overall dimensions Lenght: 3000 mm Width: 1800 mm Bledpfx Astgnivobbsr Weight: 1500 Kg

Condition: excellent (used), High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz Ovp Bodpfx Aeb Nkuhebbolr -Type: 6ES5 385-8MB11 -Number: 3x High Speed Counter available -Price: per package -Dimensions box: 140/110/H60 mm -Weight: 0.3 kg/piece

Condition: excellent (used), Year of construction: 2010, KAWASAKI YF03N ULTRA-HIGH-SPEED DELTA ROBOT The Y series robots are parallel type pick & place robots offering quality and reliability. Brand Kawasaki Type YF03N Year of manufacture 2010 Serial number YF0030012 Electrical connection 400 V Overall dimension L 2400 mm Overall dimension W 2350 mm Overall dimension H 2750 mm Description of the Kawasaki YF03N robot Type Parallel kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) *1 ± 0.1 Movement range (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) *2 0.27s (1 kg) 0.45s (3 kg) Other: 400 volt; camera; software; instructions; components; iron frame, with switch cabinet; 2x connection cable 5-pole; control panel E40E-A003 Bljdpeg T U Nbjfx Abbsr Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition Blodpfxsfxg T Uj Abbor

Condition: new, Year of construction: 2025, Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. "Blade Position Adjusting on Power-Off" function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm; sealing bar width: 230mm; max. speed of the machine in neutral: 100 cycles/minute; power: 220V, 3.75kW; infeed length: 3000mm; machine dimensions: L5050xW1190xH1650mm; weight: 1020kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bodpfx Aov Nl Iaebbolr

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 Blodpfx Aewz Nzmjbber - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: good (used), functionality: fully functional, Data --- Drilling capacity 40 mm / St. 60 --- Tapping capacity M 33 mm / steel --- Mounting MK 4 --- 18 speeds 35 - 1,800 rpm --- 5 feeds 0.075 / 0.15 / 0.3 / 0.45 / 0.6 mm/rev --- ---- Blsdpfexdu H Rex Abbjr

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm Blsdpsirax Uofx Abbsr -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations Bledovphiyepfx Abbjr * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Bjdpfx Abof Axn Usbolr Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: like new (used), CHARLES ROSS Mixer HSM-100LH2 high speed HSM-100LH-2 control mc series AC Tech Bjdswbtfpspfx Abbolr with housing hydraulic control HIGHSHEAR MIXER Appliances have been excellently maintained. Some with replacement blades You are buying a device here View more product information here You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Bjdpfoxmhflex Abbslr Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: good (used), Year of construction: 1971, functionality: fully functional, total height: 3,000 mm, pressing force: 30 t, overall weight: 4,500 kg, total width: 1,500 mm, total length: 2,000 mm, Overhaul 2005 Filling height 140 mm Bedpfx Absu Rn Hxobslr Strokes per minute 7.5 - 21.5 Top punch stroke 175 mm Top ram adjustment 115 mm Top ram pre-spring 20 mm Total connected load 15 KW

Condition: used, High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz -Type: 6ES5 385-8MB11 -Number: 2x Modul available -Price: per package -Dimensions: 100/45/H135 mm Bledpsh Db H Djfx Abber -Weight: 0.2 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2,257 h, functionality: fully functional, machine/vehicle number: SN7682, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain TNC640 with integrated pallet changer, 40 pallet stations Travel range X/Y/Z: 730x250x400 mm B-axis travel range: +/- 105 degrees C-axis: infinite Working area X/Y/Z: 585x250x400 mm Maximum workpiece weight: 60 kg Distance machine table to spindle nose: 450 mm Machine dimensions (WxDxH): 2845x2370x3000 mm Machine weight: 8,000 kg Blodpfx Aow U D Igebbsr Equipment: Cooling unit Rotary tilting table 160 (B/C axis) Workpiece measurement Renishaw OMP400 Dust extraction L-CUT 5-axis table chuck EROWA PowerChuck Pallet changer ITS50/150 pallets Tool changer with 90 positions MHT media distributor Control unit Heidenhain TNC640 Milling spindle Steptec HVC140 Spindle speed: 42,000 rpm HSK40

Condition: ready for operation (used), Year of construction: 2011, X-axis: 300mm, Y-axis: 250mm, Z-axis: 250mm, rapid traverse (X/Y/Z): 40/40/60m/min, chip-to-chip time: 1.5s, clamping surface dimensions: 2x 550x300mm, max. spindle speed: 15,000/min, torque: 23Nm, tool holder: HSK-A32, number of tools: 12, tool changer: CHIRON basket changer, control: GE Fanuc Series oi-MC. An on-site inspection is possible. Blsdpfx Aew T Su Ssbber

Condition: good (used), ManuMatik / KraussMaffei high-pressure cylinders  The high-pressure cylinders come from a commutator press and were in use there until the end.  Blsdpfx Abshtyxlebor Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are included  Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery 1 x pressing unit Complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS Bsdolzhhkepfx Abbelr - overhauled - Workspace: - X axis: 200 mm - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction - RMS Main Job manager - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option - Remote maintenance via Teamviewer - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.

Condition: good (used), Year of construction: 1973, functionality: fully functional, overall weight: 4,500 kg, total length: 2,000 mm, total width: 1,500 mm, total height: 3,000 mm, power: 30 kW (40.79 HP), Overhaul in 2007 Filling height 140 mm Blodpfxou Rn S Io Abbor Strokes per minute 8.0 - 25.0 Top punch stroke 175 mm Upper punch adjustment 115 mm Top ram pre-spring 20 mm Total connected load 9 KW