Used Heavy Duty Cnc Lathe for sale (15,497)

Year of construction: 2015, condition: used, Year of manufacture: Jan 2015 New: No Serial number: 280/75 r 22.5 Ihodpfx Agsx T Afie Uot Mooie terminal trekker Heavy duty banden op velg

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargo trailers, roll trailers, cargo trailers -Heavy-duty transport wagon: industrial trailer -Platform: 17470/2545/H850 mm -Load capacity: approx. 85 t Ihsdpfx Ajl Ab D Hsg Ust -Tires: Solid rubber -Quantity: 1 piece available -Empty weight: 8000 kg

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Ihedpfx Aex Sqaxeg Uot Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: good (used), Year of construction: 2014, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, Iodpfx Aex Eluwjg Usht 790mm max cutting length, 12 Station Turret, 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2016, color: red, Year of construction: 2016, operating hours: 2,400 h, 2016 MAFI double-steered and couplable heavy-duty trailers (Platform: 250x130cm) with 6,000kg payload, 9 units available = Further information = Ihodoxzdz Sopfx Ag Ujt General information Model year: 2016 Technical information Fuel type: Electric Front axle: Steered Rear axle: Steered Weights Unladen weight: 525 kg Payload: 6,000 kg Gross weight: 6,525 kg Functional Superstructure brand: MAFI 1060/6t Condition Technical condition: very good Optical condition: very good Further information Contact Arne Honingh for more information.

Condition: used, machine/vehicle number: XL9T0N30074415085, axle configuration: 3 axles, first registration: 05/2013, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = Ihodpfx Agjx U Dk No Uet - Air Suspension - BPW Axles - Lift Axle = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg APK (MOT): tested until 06/2026 Registration number: OL-21-YV

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Double spindle CNC lathe with 2 spindles, 3 turrets and 3 Y axes each turret with 15 stations, BMT 44 driven tool holder 2x C-axis 3x Y axis Fanuc 32i -TB control Bar passage 65 mm Left spindle 15/11 KW, Hainbuch Spanntop mini Axle pull size 65 Right spindle 11/7.5 KW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar loader interface Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Ihsdpfxovxu Eaj Ag Ust Tool monitoring for spindle and AGW Spindle flushing through the counter spindle IKZ, Deublin Rotary distributor Hinged belt conveyor Transformer available immediately

Condition: used, axle configuration: 3 axles, first registration: 08/2013, color: other, Year of construction: 2013, Empty weight: 7.100 kg Axle 1: left 8 mm right 9 mm Axle 2: left 8 mm right 9 mm Axle 3: left 7 mm right 7 mm Ihsdow Uhzkspfx Ag Uet We have the possibility to stack trailers! 

Condition: excellent (used), Year of construction: 2006, turning length: 365 mm, spindle motor power: 10 W, travel distance X-axis: 160 mm, SCHUNCK 160 mm chuck with jaws Full C-Axis 360.000 Driven Live tooling Part catcher Tooling package with 12 Tooling holders 3 x Live tooling AXIAL 3 x Live tooling RADIAL Collet device with inserts Cutting Hours 14.462 H Max. turning Ø: 380mm X-Axis: 160mm Z-Axis: 365mm Spindle bore: 56/42mm Speedrange: 6000Rpm Spindle power: 10kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Chip conveyor: Yes Pinole taper: 4Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 3800mm Width: 1720mm Ihodpox R Szhjfx Ag Uot Height: 1670mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, Ihodpfex Elr Aex Ag Ujt sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: excellent (used), Year of construction: 2016, operating hours: 2,400 h, load capacity: 6,000 kg, fuel type: electric, color: red, 2016 MAFI heavy-duty trailers with double steering and coupling capability (floor: 250x130 cm), load capacity 6,000 kg, 9 units available = Further Information = General Information Year of manufacture: Sept. 2016 Model year: 2016 Axle Configuration Front axle: Steered Rear axle: Steered Weights Unladen weight: 525 kg Gross weight: 6,525 kg Functionality Body brand: MAFI 1060/6t Condition Technical condition: Very good Optical condition: Very good Ihjdpfx Aexzd A Aog Ust Further information Please contact Arne Honingh for more details.

Condition: used, Year of construction: 1998, turning diameter max. 250 mm turning length max. 900 mm control FANUC SERIE 0-T turning spindle Durchlass 75mm chuck diameter 250 mm turning speeds 0-3700 U/min transmission ratio 2 tool numbers 12 feed speeds X/Z 15/20 mm/min quill stroke 100 mm diameter of quill 110 mm tool adaptor MK 4 coolant tank 130 l Ihedpfxjucgxuj Ag Uet weight - pallet system 5500 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Iodpfx Ajwwkx Ejg Uoht Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: used, axle configuration: 3 axles, first registration: 12/2007, color: other, Year of construction: 2007, Empty weight: 7.050 kg Axle 1: left 6 mm right 6 mm Ijdpfx Ajw Uh N Usg Uoht Axle 2: left 8 mm right 8 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers! 

Condition: used, Year of construction: 1996, Harrison Alpha 550 CNC Straight Bed Lathe Approx Ø550mm Swing Over Bed. Distance Between Centres Approx 2,000mm. Turning Speeds 15-1,800 RPM. Ø90mm Spindle Bore. (1) Ø300mm - 3 Jaw Chuck. (1) T3 Dickson Quick Change Toolpost. Manual Tailstock, 5 Morse Taper. (1) YP-150 Coolant Pump (1998). S/No. A50029. Note: Only Plastic Materials Have Been Cut On This Machine. This Lot Includes (3) Assorted Toolholder Blocks. Dimensions Of Machine Approx 3,100mm x 1,550mm x 1,700mm High. Power Input 415 Volt, 3-Phase, 11kW. Ihedpfx Agsx H S Uye Uet

Condition: excellent (used), Year of construction: 2019, 256mm maximum cutting diameter, 458mm max turned length, 4,800rpm spindle speed, 51mm bar capacity, Isdjx D Uy Rjpfx Ag Uoht 12 station VDI turret, 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Ihedpoyaaavofx Ag Uot Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: used, Seriennummer: 0419 Iedpfewm Rrdjx Ag Ueht

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm Iodpeqa Txqofx Ag Ujht spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, axle configuration: 3 axles, first registration: 02/1995, color: other, Year of construction: 1995, Empty weight: 7.500 kg Axle 1: left 10 mm right 9 mm Axle 2: left 10 mm right 10 mm Axle 3: left 8 m right 8 mm Iodpfx Agsw Uqkzj Ueht We have the possibility to stack trailers! 

Condition: used, turning diameter 530 mm turning length 500 mm control OSP 700 L-G Description of features Machine type CNC lathe with milling unit (C-axis + driven tools) Machining axes X, Z and C-axis (C for rotating workpiece) Tool turret 8-12 stations, with driven tools Turning diameter above the bed: 530mm Turning diameter above the slide: 530mm Iodpfswugr Aox Ag Ueht Turning diameter above the cross slide: 340mm Centre distance: 500mm Spindle speed approx. 50 - 3500 rpm Driven tools For drilling, milling, thread cutting on the workpiece circumferential surface C-axis Enables positioning in angular degrees (e.g. milling on circumference) Spindle bore approx. 50 mm Machine weight: approx. 5080kg All data without guarantee. This information is for guidance only. For further information, please contact . Translated with (free version)

Condition: used, color: other, Year of construction: 1996, Serial number: 27 10.723.235 Isdsucvpvopfx Ag Uoht We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, first registration: 06/2004, color: other, Year of construction: 2004, Heavy duty dutch trailer BPW drum axles low priced. Ihedsv Ab Hrspfx Ag Ust