Used Heating Boiler for sale (13,068)

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity year of manufacture 2014 Ledpfx Ahow Rpdrebehg without discharge unit (can be provided if needed)

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Lsdpfx Ajyalbljhbshg

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Ledpfxeyizqne Ahbohg Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Lhsdpfx Ahoyhlrmebog

Condition: good (used), Year of construction: 1994, Heating boiler for hot water or steam. Fuel: wood chips. Heating capacity: 6 MW. Up to 120°C, permissible overpressure: 1 bar. Can also be operated with an oil burner as fuel. Dismantling must be carried out by the buyer. Lhsdpfx Aeyiky Ajhbsg

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only Lodpfxoy Dfd No Ahbehg with hydraulic feed system maximum thermal output up to 850 kW suitable for dry material

Year of construction: 2007, condition: like new (used), Technical data, please see in pdf document. Lhsdpoha Dm Tsfx Ahbjg

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch Ledeu U Ey Iopfx Ahbohg - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 24288, power: 550 kW (747.79 HP), pressure: 4 bar, nominal heat output: 550 kW (747.79 HP), tank capacity: 1,546 l, operating pressure: 4 bar, Equipment: type plate available, We offer this used MAWERA FU 400 RIA heating system, year of manufacture 2005. Operating pressure: 4 bar Output: 440 kW Lhedoy D A A Nspfx Ahbsg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), 1 x Adpak table-top heat / shrink tunnel. Can be retrospectively fitted to frame. Technical specification ⚙️ ✅ Model - PVE 400.  ✅ Serial number - 5270. ✅ Aperture dimensions - 405mm wide x 240mm high. Lhjdpfjxrbvuox Ahbeg ✅ Belt dimensions - 1170mm long x 345mm wide. ✅ Electrical requirements - 415 V / 50 hz / 3 phase.   ✅ Overall dimensions - 1230mm long x 580mm wide x 720mm high.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: Ljdpfx Aoykvdlehbshg - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,765 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,950 mm, gearing type: converter, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 250 X 75 - 12, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,950 mm, total length: 2,650 mm, total width: 2,700 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C5000ET – 2013 | 9,765 HOURS | ELECTRIC | DUPLEX 4400 mm --- 🚀 Ready to operate from day one – no investment, no risk --- ### ✅ Why choose this forklift? Are you looking for a forklift that won’t disrupt your operations? This COMBILIFT C5000ET is a tested unit after full service – ready to run immediately without hidden costs. ✔ Fully serviced (oils, filters, total inspection of all components) ✔ Technical and visual condition: like new ✔ Only 9,765 operating hours – genuinely low mileage ✔ New tyres – no additional investment needed --- ### ⚙️ Main specifications * Capacity: 5,000 kg * Drive: ELECTRIC ⚡ * Mast: Duplex – 4,400 mm lift height * Fork positioner: 1,150 mm * Forks: 1,200 mm * Cabin: Full cabin with heating and air conditioning --- ### 📋 Full technical specification General info: * Year of manufacture: 2013 * Operating hours: 9,765 MTH * Capacity: 5,000 kg * Load centre: 600 mm * Truck weight: 7,500 kg Mast and lifting system: * Mast type: Duplex * Lifting height: 4,400 mm Forks and attachments: * Fork positioner: 1,150 mm Lhjdpfx Asy Stb Eehbog * Fork length: 1,200 mm * Free lift: 2,000 mm Dimensions: * Height: 2,600 mm * Length: 2,650 mm * Width: 2,700 mm * Overall height: 2,950 mm Running gear: * Tyres: Super elastic (100%) – new * Front: 16 x 7 x 10 1/2 * Rear: 250 x 75 - 12 Equipment: * Full cabin * Fork positioner * Heating Condition: * Technical: 5/5 – fully serviced * Aesthetic: Refurbished, like new, no corrosion --- ### 🏭 Perfect for: ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industries ✔ Handling long loads ✔ Indoor and outdoor use --- ### 💡 What you’re buying This is not just a “used forklift.” You’re purchasing a fully prepared, ready-to-work machine: ✔ Every unit is thoroughly tested prior to sale ✔ Ready for immediate implementation ✔ Live online demo possible 🎥 ✔ Delivery direct to your company available 🚛 --- ### 🌍 Delivery and support * Transport across Europe * Complete logistics handling * Leasing / finance support * After-sales service --- ### 🏆 Why FT LOGISTICS? We deliver forklifts that work – not ones that end up in the workshop. ✔ Over 100 machines available ✔ In-house servicing and prep ✔ Europe-wide experience ✔ Hundreds of satisfied customers --- ### 📞 Contact us now FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: like new (used), Year of construction: 2015, operating hours: 27,000 h, functionality: fully functional, Used Combined Heat and Power Unit (CHP) Manufacturer: 2G Energietechnik GmbH Model: G4076 Engine: MAN Gas Engine Electrical Power: approx. 400 kW Voltage: 400 VAC / 24 VDC Frequency: 50 Hz Year: 2015 / 2017 Condition: Used, in working condition - Complete CHP unit Lhjdpfeyxl Uqjx Ahbog - Control cabinet - Control system / HMI - Gas engine and generator - Delivery as inspected Price: EURO 125,000.-/EXW (Loaded) Location: Germany/Düsseldorf Delivery: EXW (Ex Works)

Condition: excellent (used), Binder Type: Binder ED 53 Lhedpeynh E Aefx Ahbeg For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Condition: used, functionality: fully functional, Year of construction: 2008, Bitumen tank, electric Lhedpfjy Hf Tcjx Ahbeg Manufacturer: Westhydraulik Year of manufacture: 2008 Capacity: 60 m³

Year of construction: 2006, operating hours: 30 h, condition: used, functionality: fully functional, machine/vehicle number: 4292-1-197652, Used process plant from production changeover. The unit is suitable for applications involving viscous or temperature-sensitive media. Sale from location, inspection possible by appointment. Lhjdpfx Ahoy Akm Hebsg

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total width: 440 mm, total length: 450 mm, total height: 850 mm, input frequency: 50 Hz, DGUV certified until: 04/2027, TOP warming cabinet Temperature adjustable up to 90°C Stainless steel construction Lhsdevdkuuspfx Ahbjg Dimensions: 440 x 450 x 850 mm (W x D x H) Connection: 220V, 750 watts Used unit, cleaned Many more bakery machines in stock!

Condition: excellent (used), operating hours: 50 h, functionality: fully functional, total height: 2,400 mm, load capacity: 600 kg, construction height: 2,400 mm, year of last overhaul: 2024, DGUV certified until: 04/2027, total width: 1,100 mm, total length: 1,175 mm, lifting height: 1,500 mm, input voltage: 400 V, Boiler lifting tipper Diosna model: HK 115 Lhodpjd Rxn Rofx Ahbeg For planetary kettle stainless steel 2 dumping heights DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned and tested with 6 months warranty

Condition: new, Year of construction: 2023, functionality: fully functional, power: 70 kW (95.17 HP), 3 SPANNER Wood Power Plant HKA70 Wood Power Plant HKA70 consisting of: CHP unit with 68 kW electrical output, Type 70-7.4-V2.0: incl. synchronous generator, exhaust gas heat exchanger, silencer Wood gasifier, Type HV70-V2.0: incl. magnet for metal separation in sluice area, reformer, gas cooler section, Wood gas filter Remote maintenance and remote start module, CO warning system Control cabinet and connecting cables 3 x Mixed flow cooler HKA70 3 x Spare parts package HKA70 3 x Preheating HKA 3 x Sensor for heat-led interval operation 1 x Service flare 3 x Connection kit flare 1 x External VPN router 1 x Oil change device 1 x Heat exchanger cleaning device 1 x Mobile CO measuring device Ledpfx Ahey Ayhyjbohg 1 x Pressure measuring device 1 x Fan 3 x Slanted residue discharge 3 x Failure head for residue discharge 3 x Connection conveyor channel – steel box 6 x Steel ash box 800 liters

Condition: good (used), Year of construction: 2013, Complete heating system, but without fuel extraction from the storage room, with cyclone for flue gas dust removal, already dismantled. Lhodpfx Aheytra Uebeg

Condition: used, This listing is for a Pierce Reacti-Therm 111 Heating module 18840 Lhedpfx Aexzh Rdshbog

Condition: used, This listing is for 1 of 2 Ortho Biovue System Heat block-32 Lhsdpfsxzh Rksx Ahbeg

Condition: used, This listing is for a Cellpath 110-240 Vac Heat block The CellPath 110–240 Vac Heat Block is a precision-engineered device designed for controlled temperature applications in the laboratory. With its robust construction and variable voltage capabilities, this heat block ensures consistent and reliable performance, making it ideal for incubation and sample preparation tasks. Lodsxzh N Tepfx Ahbehg

Condition: good (used), JBT M Fryer, 6m x 600mm. Fully optioned fryer. Electrically heated, Teflon infeed, sediment removal, touchscreen controls etc. The JBT M Fryer is a high-performance industrial fryer designed for large-scale food production. The M Fryer is used primarily in the food industry to fry various products such as chicken, fish, snacks, and other prepared foods. Lhodpfxeud Ry So Ahbsg

Condition: used, Fulton Boiler with blowdown vessel and water softener, model number is RBC1250B Lhsdpfx Asxxklrohbeg Including Grundfos multistage pump & its motor, condensate transfer pump, control panel Nu-Way automatic oil burning unit.