Used Half Tube for sale (3,881)

Condition: used, L: 1240, W: 1045, H: 680 (mm). Ljdpfowprz Sox Aa Eeak Product: Stacking box steel. Type: Fixed construction. Version: With front opening. Material: steel. Walls: corrugated steel plate. Floor: profiled steel. Euronorm (mm): 1200 x 1000. Colour: green. Surface treatment: painted. Internal length (mm): 1120. Internal

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fintec 128 Tube finishing machine for sale Lodpfx Ajwbh Dysa Esak Can be viewed under power with your steel tubes

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Lasdevtgn Njpfx Aa Eok Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Lasdpfx Aevk Scgoa Ejk Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, The RAX Tube End Finishing Machine from KNUTH is a motor-driven notcher designed for efficiently notching tubes made of steel and non-ferrous heavy metals. With its compact footprint, this versatile machine can accommodate various tube diameters ranging from 1/4" to 2", ensuring high productivity and low operational costs. The RAX operates with a powerful 1.5 kW main drive motor and is capable of cutting plate thicknesses of up to 3 mm, delivering clean cuts that require no rework. It's simple to use and can handle multiple tube sizes instantly, enhancing your workflow. You can easily operate this machine with standard 230 Volt connectivity. To learn more about how the RAX can benefit your tube processing, request a quote today. This robust notcher stands out in the Tube End Finishing Machines category, making it an essential addition to your Tube and Profile Processing solutions. Laedpjwhkf Tjfx Aa Eok

Condition: new, Cesurbend Mandrel Tube Bending Machine PBH-32 E Technical Specifications Max. tube diameter (mild steel): 32 mm Max. tube wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rpm): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Hydraulic motor power (kW): 1.5 Tube length (mm): 2000 Machine width (mm): 1000 Laedpfx Aoxt Rcgea Ejk Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 400 Features • 4-way adjustable measuring device • 7" touchscreen colour display • 5 sequential twisting options • 100 program memory capacity • Omron PLC control

Condition: used, Used steel stacking bins. The used storage bin stands on sturdy slides and is therefore easy to pick up with a forklift or pallet truck. The stacking box is also equipped with four upright corners. This makes the bin easy to stack. Laedpfek I Rt Usx Aa Eok 1 long side is half open. L: 720, W: 680, H: 350 (mm). Product: Stacking box

Year of construction: 2006, condition: good (used), Used Blm Lt120 1kw cnc tube laser for sale Lajdpfx Ajg Tvgysa Eok Cutting capacity 6500mm max load and 120mm max SQ and Round. The machine can cut not just tube or pipe yet also rectangular and square hollow section Make: Blm Model:Lt120 Power: 1kw / 1000 watt New / year 2006 Complete with tube stacking system Delivery, installation and operator training available in mainland uk

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC Control: PC-based Beckhoff CNC control Technical Data: - Maximum tube diameter x wall thickness: 60 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube center): 25 mm - Maximum bending radius (to tube center): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube feed length: 1000 mm - Bending direction: right - Machine weight: 7,000 kg - Total connected load: 39 kW - Voltage: 400 V / 50 Hz - Current: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed on slide rails - Automatic tube turning and repositioning unit - Electric mandrel bending device - Pneumatic mandrel rod safety system - PC control Beckhoff Ljdpfxexzubve Aa Eeak - Automatic central block lubrication - Laser scanner, safety fencing Machine condition – repair needed: The planetary gearbox of the transport carriage is defective and must be replaced. Spare parts costs according to quotation: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT – installation not included. Cheaper price – sale in as-is condition Immediate availability, including loading onto truck free of charge.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Our state-of-the-art VFFS packaging machine is a true all-rounder, specifically designed to optimally support companies that demand the highest quality standards. With exceptional build quality and a wide range of applications, our machine features intuitive operation that streamlines your packaging processes. The highly powerful motors and user-friendly color touchscreen control system provide maximum flexibility during format changes and significantly simplify your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic infeed systems, including weighing solutions, which can be retrofitted according to your requirements. If you want to optimize your packaging processes with robust productivity and high quality, Impuls Packaging is your ideal partner. Machine features: 1. Single film unwind 2. Individually servo-driven sealing jaw 3. Three servo drive controllers 4. HMI control panel 5. Two independent temperature controllers 6. Housing made of stainless steel 304 7. Documentation in the local language 8. Registration mark control 9. Programmable bag length 10. Vertical product flow 11. One format set is included in the price. Technical parameters: 1. Product length: L50-290mm 2. Product width: W80-200mm Lodpjwlgnrjfx Aa Esak 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) 4. Maximum film width: 420mm 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flow pack bag 2. Stand-up pouch (classic flow pack bag with side gusset – available as an optional extra)

Condition: new, The EM 250, a robust Tube End Finishing Machine from KNUTH, is designed to provide precise deburring of tubes, profiles, and flat materials, making it an essential addition to any cold circular saw, shear, or profile processing setup. This powerful machine allows for effective deburring both inside and outside the workpieces utilizing a sturdy wire brush, ensuring that chips and burrs are thoroughly removed while maintaining the integrity of the cutting edge. With a motor rating of 2.2 kW and a speed of 3,000 1/min, the EM 250 is ready to enhance productivity in any workshop engaged in tube processing. It features a rigid machine foot and is equipped with a vacuum exhaust connection for cleaner operation. Moreover, it comes with a 5-year warranty for the drive motor, underscoring its reliability. For a well-rounded solution in Tube End Finishing Machines, consider the EM 250. Request a quote today to learn more about this powerful tool in Tube and Profile Processing. Laedpfx Aaou E H Tgs Esk

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display Lodpfx Aasx Ebzqe Eeak - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: good (used), Year of construction: 2012, Technical specifications: Tube Laser Cutting System for round tubes, rectangular tubes, oval tubes Also suitable for open profiles such as U-profiles, flat steel, angle steel Laser: CO2 ROFIN DC 025, 2.5 kW Max. tube diameter: 120 mm Min. square dimension: 12 x 12 mm Max. square dimension: 120 x 120 mm Max. rectangular tube dimension (one side): 140 mm Max. tube weight: 15 kg/m Cutting capacity steel: 8 mm Cutting capacity stainless steel: 6 mm Cutting capacity aluminium: 4 mm Cutting capacity brass: 5 mm Cutting capacity copper: 3 mm PRECITEC AK-HP universal cutting head holder Loading: Bundle loading: fully automatic Minimum loadable length: 3,200 mm Maximum loadable length: 6,500 mm Max. loading capacity: 4,000 kg CNC control: Lajdsx Dy Imopfx Aa Eok Control: SIEMENS Sinumerik 840D SL Extraction system: Performance: 2,000 m³/h Space requirements: Installation area: approx. 14,550 x 4,400 mm Discharge table at the front of the machine Condition: Very good condition, as it has seen little use The seller is not liable for typographical or data transmission errors. The machine's appearance, condition, and wear conform to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm - Solid material: 45 mm - Maximum tool diameter: 900 mm Ledpjx I Afxefx Aa Esak - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: good (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 0100-0149-2024, overall weight: 700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,500 mm, TECHNICAL DATA & EQUIPMENT: Ljdpfx Asxm Symsa Esak Suitable for flat material Working length: approx. 2500 mm PICK-UP NOTES: Collection must take place strictly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: used, Mandrel Tube Bending Machine 42 Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Laodpownrt Sofx Aa Esk

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Laedpfsuzlh Iex Aa Esk

Condition: good (used), Year of construction: 1996, control type: CNC control, pipe diameter (max.): 28 mm, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Lodpfsx H R Hzjx Aa Eeak Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag Lajdou Ni Rpspfx Aa Eek and so on 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Ledpfx Aaen Upgls Ejak

Condition: excellent (used), Year of construction: 2021, A flow-wrapping machine that is suitable for packaging various products. We would be happy to advise you! Dimensions ////: Length: 400mm Laedou Ny Eqepfx Aa Esk Width ////: 160mm Film Max ////: 340mm Price ////: without printer €5,500 Price ////: with printer €8,900

Condition: new, The RA 2 Tube End Finishing Machine is an essential tool for every workshop, designed to simplify the assembly and welding of tubes at a precise 90° angle. This robust device caters to various tube diameters while allowing for horizontal and vertical operation, making it versatile for both dual and corner unions. With its capability to handle tubes with wall thicknesses of up to 5 mm, from steel to non-ferrous metals, the RA 2 ensures quick and efficient machining. An eccentric shaft guarantees minimal effort during operation, enhancing productivity. The machine comes standard with an operator manual to facilitate setup and use. For your tube end finishing needs and additional inquiries, you can request a quote today and elevate your performance with KNUTH equipment. Lajdpjwhkf Hsfx Aa Esk

Condition: new, Year of construction: 2023, functionality: fully functional, warranty duration: 12 months, !! We are happy to advise you !! Production orientation ////: Vertical Conveying system ////: Infeed and discharge optional and product-dependent Film feed ////: rear Forming shoulder ////: fixed Operator display ////: Touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (dependent on film width) Packaging height ////: dependent on forming shoulder Speed ////: 15-30 bags/min depending on material, package size, and product Film width ////: 110-320 mm Power consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz / single-phase Machine weight ////: approx. 600 Kg Machine dimensions ////: approx. 1720 x 1400 x 1750 mm Machine material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable ink wheel printer available as an option for an additional €1,200 Delivery time ////: Current delivery time under 10 weeks Platform and Z conveyor system €12,000 Lsdpfx Aaeq Ikhae Ejak Features: Stainless steel construction—also suitable for the food industry • Application for powders, granules, liquids, pastes/dough, and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control with color icons • Pouch closing system for finished stand-up pouches • Safety protection covers • Can be combined with upstream and downstream machinery • Customized modifications/constructions on request • 12-head weigher integrated • each hopper 0.8L Additional options (on request and at extra charge): • Stainless steel finish/coating • Zigzag knife, Euro hole punch, etc. • Automatic stop for empty product (no product – no bag) • Automatic product feeding systems, stepwise insertion systems • Perforation units (tear-open thread) for easy opening • Length-dependent product processing by photocell sensor Production orientation: Vertical

Condition: new, functionality: fully functional, machine/vehicle number: V101VVNG6004ESGR0ZL200H, Year of construction: 2023, Production orientation ////: Vertical Ljdjq Ikg Ijpfx Aa Eoak Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-110 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 240 Kg System dimensions ////: approx. 1500 x 960 x 1220 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable incl. wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and Small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Length-dependent product processing using photocell query

Condition: new, functionality: fully functional, Year of construction: 2023, Showroom system!! Available immediately!! The flow-wrapping machine is suitable for packaging various products. An operator display (HMI) ensures easy operation and access to all necessary settings, such as flow-wrapping length and speed. Model name ////: Rotection tubular bag machine Operating display ////: 10" touchscreen, swiveling thanks to extension arm for comfortable operator handling Drives ////: Servo Packaging length ////: 50-450 mm Packaging width ////: 35-180 mm (depending on film width) Packaging height ////: 5-80 mm (depending on forming shoulder) Speed ////: 30-100 bags/min. in continuous operation Speed ////: up to 60 bags/min. intermittently Film width ////: 90-400 mm Consumption ////: approx. 8 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 800 kg System dimensions ////: approx. 4370 x 1020 x 1550 mm (LxWxH) Error rate ////: < 5% Print mark sensor ////: Yes Winding shaft ////: Fixing the roll by hand without compressed air including roll stop for precise application Roll fastening and guide ////: On top Printer holder ////: available for an additional charge Lajdpfx Aask Dz Hwj Esk In order to guarantee you the best possible advice, we are happy to carry out a test with your product in advance in order to be able to offer you the appropriate settings and, if necessary, changes for the best possible performance of your product.