Used Hair Implant Artas for sale (92)

Year of construction: 2023, condition: used, Anthos A5 / Class A5 is a dental treatment unit with a dental chair. 0300 1 50679 Anthos A5 International Serial number 711B0038 19,962.30 € 0310 1 9021377 Patient chair A2.5L RL wide included in the package 0320 1 829346 Standard headrest included in the package 0330 1 831843 Wide upholstery, blueberry/purple 132 included in the package 0340 1 829154 Left armrest included in the package 0350 1 9021477 Pneumatic brake included in the package 0360 1 9021416 6F syringe, angled included in the package 0370 1 9021387 Light turbine unit included in the package 0380 2 9021398 Light motor i-MMr L LED included in the package 0390 1 9021438 ZEG u-PZ 7 E with light included in the package 0400 1 9021455 Asymmetrical tray table included in the package 0410 1 829383 Sprayer heater included in the package 0420 1 829204 Assistant element, 3 holders, DG arm included in the package 0430 1 612043 Spray mist extraction unit included in the package 0440 1 612045 Saliva ejector included in the package 0450 1 829334 Mouthwash basin, glass, manual included in the package Nodpsztxzdofx Aprjwk 0460 1 829143 Dürr mouthwash basin valve included in the package 0470 1 443132 Smooth suction hoses included in the package 0480 1 829264 Wet suction unit included in the package 0490 1 829362 Valve for central wet suction unit included in the package 0510 1 829215 Hygiene container SHS included in the package 0520 1 9021460 Power pedal included in the package 0530 1 829278 Venus plus L Led No-Touch included in the package Former new price Total: 56,494.30 €

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED AGAIN!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. This would certainly be of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter: 350mm Max. test piece height: 500mm (higher measurements are possible, up to a maximum of 1000mm when measured in two halves...) Self-centering of the workpiece: +/- 5mm Max. weight of test piece: 40 kg Nedpfxszcqy Ee Aprjwk The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. There is also a sample/sample lens (hemisphere) for calibration! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets using a freight carrier. It is already securely fastened to the pallets. The Talyrond 265 and the desk will be well-protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide excellent service for many years to come!!

Condition: used, mileage: 300,000 km, power: 130 kW (176.75 HP), first registration: 06/2010, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, gearing type: automatic, number of gears: 7, emission class: euro4, number of seats: 2, Year of construction: 2010, Equipment: ABS, fog lights, traction control, General information Number of doors: 2 Model range: Jun 2006 - Oct 2011 Cab: double Nwedpfx Aoy Dn Nzeprek Technical information Torque: 400 Nm Number of cylinders: 4 Engine capacity: 2.998 cc Weights Empty weight: 2.280 kg Carrying capacity: 1.220 kg GVW: 3.500 kg Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - Electronic brakeforce distribution - Front fog lights - Height adjustable driver's seat - Immobiliser - Tachograph

Condition: excellent (used), mileage: 136,319 km, power: 74 kW (100.61 HP), first registration: 01/2014, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, Year of construction: 2014, Equipment: airbag, power assisted steering, = Additional options and accessories = - Radio/CD player = Further information = Number of cylinders: 4 Nwodpezcablefx Aprek Engine displacement: 2,198 cc Technical condition: very good Visual condition: very good

Condition: excellent (used), mileage: 136,319 km, power: 74 kW (100.61 HP), first registration: 01/2014, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro5, Year of construction: 2014, Equipment: airbag, electric window regulation, power assisted steering, = Additional options and equipment = - Rear work lights - Radio/CD player - Automatic pre-heating system = Further information = Number of cylinders: 4 gross vehicle weight: 3,100 kg Technical condition: very good Visual condition: very good Nodpfsyntnvox Aprswk Contact Andre, Henri or Andre for further information.

Condition: ready for operation (used), Maximum material height: 80 mm Table dimensions: 2000 x 1000 mm Nwjdpfowma Hkex Aprjk Arm clearance: 1600 mm Motor power: 0.75 kW

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Nsdpfx Aezbr U Ujprswk Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, Year of construction: 2012, operating hours: 27,315 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Nodpfx Apjzvax Asrowk Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: like new (used), Maximum material height: 50 mm Table dimensions: 800 x 600 cm Arm clearance: 109 cm Motor power: 0.75 kW Year of manufacture: 2000 Voltage: 380 V Nwsdpfxowixlws Aprok CE

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled Nwedpjqvz U Eefx Aprsk New bearings for pressure rollers and motor new tips opening width: 430 mm

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, electrical fuse: 16 A, input voltage: 400 V, year of last overhaul: 2025, Dough divider for bread dough weights from 250 to 1,650 grams. Completely overhauled with a revised dough chamber. Capacity: 960 pcs/hour or 16 pieces per minute. Nwsdpfxox Ahm Ue Aprsk

Condition: used, Year of construction: 2012, operating hours: 28,191 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Nwedpfx Apoy Engcsrjk Axle 3: left mm right mm

Condition: used, Year of construction: 2017, operating hours: 19,000 h, gearing type: automatic, color: other, Year of manufacture: Aug 2017 Axle 1: left 5 mm right 5 mm Axle 2: left 18 18 mm right 18 18 mm Njdpfx Aezu Rt Ueprowk Axle 3: left mm right mm

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Nedpfx Aszb A Rgeprswk

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm Njdpfxey U Nais Aprowk 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Flexible front unit protection for loading unlimited Y-size (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2015, operating hours: 21,822 h, gearing type: automatic, color: other, Year of manufacture: Aug 2015 Axle 1: left 22 mm right 22 mm Axle 2: left 26 -26 mm right 26-26 mm Nwodpfx Apjzvfyfersk Axle 3: left mm right mm

Condition: used, mileage: 127,000 km, power: 114 kW (155.00 HP), first registration: 01/1998, fuel type: diesel, overall weight: 7,500 kg, next inspection (TÜV): 08/2027, color: silver, gearing type: mechanical, emission class: euro2, number of seats: 2, total length: 9,100 mm, total width: 2,550 mm, total height: 3,580 mm, loading space volume: 17 m³, loading space length: 6,900 mm, loading space width: 2,400 mm, loading space height: 2,360 mm, Equipment: parking heater, Complete hair salon on a 7.5-ton truck. Fully equipped and used extensively until recently. This is the 2nd unit of the original "1st mobile hair salon," also available from us, which was invented and built in southern Germany in the 1990s. This truck is ideally suited as a mobile hair salon during major renovation or refurbishment work on your own hair salon. Another business model would be renting it out. The buyer of the truck will also be assigned the patent, granting them the exclusive right to use this specific vehicle for commercial purposes. However, the patent cannot be transferred to other vehicles/objects. The MAN has a large box body, originally a refrigerated vehicle. Therefore, it is thermally well-insulated. Air conditioning is provided by a mobile air conditioning unit with remote control. In addition, there is an electric heater. 4 customer/hairdresser stations with height-adjustable swivel chairs, arranged at a slight angle. Plus 1 separate washbasin at the rear. In fact, there is plenty of space everywhere to work, so several professionals can cut multiple customers' hair simultaneously without constantly getting in each other's way. The salon is completed by a reception desk, coat rack, magazine rack, as well as several small cabinets/drawers and sales shelves. The main work area is approximately 5.90 m long. In front of it is a separate area of approximately 1.00 m with a washbasin for the employees. This area also houses the hot water boiler and the fuse box, as well as shelves and storage space. There are also 2 hair dryers, which are, of course, included in the offer. The overall dimensions of the box body, interior approximately: 6.90 m long (5.90 m main area plus 1.00 m separate area), 2.40 m wide, 2.36 m high. Overall, the box body has a remarkably spacious feel - for both customers and employees. This mobile hair salon has approximately 17 square meters of total space. The salon can be accessed via an aluminum staircase, which is permanently mounted on the rear right and can be folded down slightly. The matching handrails, which are on both sides, are currently lying on the floor inside the box body for transport, see photos. Large storage boxes under the box body contain connection pieces for electricity, water supply, and wastewater drainage. The vehicle must be connected to external supply lines for operation. A 230-volt system is installed inside. Nwodpszwrtujfx Aprok The external power connection is made via a 32A plug. The truck chassis is a solid MAN 8.163 LLC from the then very modern and comfortable L2000 series. Four-cylinder diesel engine with 4580 ccm, Euro 2 and manual transmission. Wheelbase: 4900 mm. An analog tachograph is installed. The top speed is 98 km/h, but the permitted speed in Germany is 80 km/h. Unladen weight 7000 kg according to the documents, permissible total weight 7500 kg. According to the vehicle documents, the current registration type is "Other Motor Vehicle - Hair Salon Truck". When operating the business, this truck may be exempt from tolls. The MAN has leaf springs at the front and air suspension at the rear with a raising and lowering function at the driver's seat. The tires, size 215/75R17.5, all have a nearly new tread depth. A spare tire is mounted on the frame. The entire truck has only covered 127,000 kilometers. The vehicle was deregistered in August 2026. The TÜV (German technical inspection) was renewed in August 2026 and is valid until 08/2027. C

Condition: used, Year of construction: 2008, operating hours: 25,885 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Nedpfxoy N Ab Ne Aprswk Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12mm Axle 3: left mm right mm

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Incl. OBEL-P High Frequenz unit. Chair seat bending : 3-4 min. pr cycle. Nwodpfx Apezi Hpusrek Still connected to power. Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free.

Condition: used, Year of construction: 2010, gearing type: automatic, color: other, Year of manufacture: Apr 2010 Njdpfxoy Enkbs Aprjwk Axle 1: left 8 mm righ8 mm Axle 2: left 8 8 mm right 8 8 mm Axle 3: left mm right mm

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2001/012, Y2001/019, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Nwodsym N Nmspfx Aprjk Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Year of construction: 2024, condition: refurbished (used), Tube Straightener 6V1+1 90×5, made by CARTACCI Recently revamped Tube diameter size : 12 – 90 mm Wall thickness : 0,8 – 5 mm Tube length : 4 – 12 m Straightening force : 16 Mp Straightening precision : 0,5 mm/m Speed infinitely variable : 0 – 100 m/min Diameter: 12 – 90 mm Thickness: 0,8 – 5 mm Length: 4 – 12 m Straightening force: 16 Mp Nwsdpeyma Hvefx Aprsk Straightening precision: 0,5 mm/m Speed: 100 m/min

Condition: used, Year of construction: 2011, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Nwjdpfxey Ennaj Aprek Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: Nodpfx Ajxlb E Aeprewk - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths - correspondence desks - various

Condition: used, Year of construction: 2016, color: other, Year of manufacture: Apr 2016 VERY NICE GOOD WORKING MODERN TERMINAL TRACTOR. Nwedpfxsy Hrhye Aprok