Used Haas Hs 1 for sale (224)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 572 mm, spindle motor power: 14,900 W, overall weight: 4,000 kg, controller manufacturer: HAAS, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-20 features a maximum cutting diameter of 13.00 in and a maximum cutting length of 22.5 in. It includes a robust spindle power rating of 20.0 hp and a rapid rate of 945 ipm for both axes. If you are looking to get high-quality turning capabilities, consider the HAAS ST-20 machine we have for sale. Contact us for further details. • Chuck size: 8.3 in / 210 mm • Max part swing: 21.0 in / 533 mm Cjdpfxoz Ha Upo Ap Dohd • Max cutting diameter (BOT turret): 13.00 in / 330 mm • Max cutting diameter (BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 2.50 in / 64 mm • X-axis rapid rate: 945 ipm / 24.0 m/min • Z-axis rapid rate: 945 ipm / 24.0 m/min • X-axis max thrust: 4,100 lbf / 18,238 N • Z-axis max thrust: 5,100 lbf / 22,686 N • Spindle nose: A2-6 • Spindle drive system: Direct speed, belt drive • Spindle max torque: 150.0 ft-lbf @ 500 rpm / 203.0 Nm @ 500 rpm • Spindle bore: 3.50 in / 88.9 mm • Turret stations: 12 stations (VDI 40) • Boring bar rear clearance: 4.00 in / 102.0 mm • Coolant tank capacity: 55 gal / 208 L • Coolant pump: 1 HP / 0.75 kW variable-flow (45 L/min @ 2 bar) • Air requirement: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Air pressure minimum: 80 psi / 5.5 bar • Air line / coupler size: 3/8 in • Low voltage electrical: 220 VAC (3 phase), 40 A full load • High voltage electrical: 440 VAC (3 phase), 20 A full load (internal non-isolated transformer 380–480V included) • Shipping dimensions: 143 in x 90 in x 92 in / 362 cm x 229 cm x 234 cm • Control system: Haas NextGen Control with touchscreen interface, 1 GB memory, Ethernet, Wi‑Fi, HaasConnect Remote Monitoring, and Haas Drop • Included machine features/options: Automatic Tool Presetter; Programmable Hydraulic Tailstock (MT4); Rigid Tapping; M130 Media Display; Safe Run; Power Failure Detection Module; Visual Part Programming System Additional equipment • Belt-type chip conveyor • Chip strainer filter kit (200 micron) Technical Specification Taper Size VDI 40 Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, total height: 2,692 mm, total width: 2,794 mm, overall weight: 5,670 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 224,000 W, number of slots in tool magazine: 24, tool weight: 5,400 g, product length (max.): 2,235 mm, number of axes: 3, This 4-axis HAAS VF-3SS was manufactured in 2017. It features an X-axis travel of 1016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a table size of 1219 x 457 mm and can support a maximum part weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3SS vertical machining centre we have for sale. Contact us for further details. • Table size: 1219 x 457 mm Cjdpfx Apsz E Sy Uj Djhd • Max part weight on table: 794 kg • max torque 122 Nm • Tool capacity limits: max diameter (all tools) 76 mm; max diameter (adjacent position empty) 127 mm; max length 330 mm • Power supply: 3x400 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,245 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, total height: 2,060 mm, total width: 1,780 mm, overall weight: 3,600 kg, controller manufacturer: HAAS, controller model: NGC, product length (max.): 3,200 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST-10 features a maximum turning diameter of 229 mm and a maximum turning length of 355 mm. It includes a spindle power of 11.2 kW and a maximum spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10 machine we have for sale. Contact us for further details. Main spindle • Spindle nose: A2-5 • Max bar capacity: 44 mm • Max turning diameter: 229 mm Chodez Izyispfx Ap Dod • Max turning length: 355 mm • Max swing over bed: 413 mmTurret and axis travels • Number of tool positions: 12Tailstock • Type: Manual • Quill taper: MT3 • Tailstock travel: 508 mm • Quill travel: 95 mmElectrical supply • Voltage: 440 V (per machine nameplate) • Phases: 3Options included: • Measuring probe • 175 mm three-jaw chuck • Hainbuch SK52 collet chuck Technical Specification Counter Spindle No Driven Tools No Taper Size VDI 40

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Chjdpfxsyu Nb Es Ap Djd Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Chedj Ah Hbcepfx Ap Ded

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Spindle drive: direct drive Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Chedpfsz Dh Edex Ap Dod Tool holders: not included Year of manufacture: 2014 Operating hours: not available Previous operation: 2–3 shifts Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.

Condition: used, Year of construction: 2018, HAAS ST20Y, year 2018 Chedpfxsz N Sple Ap Djd Y-axis C-axis Live tooling Chuck diameter 210mm Max. spindle speed 4000 rpm Spindle bore 51mm Z-axis travel 533mm Y-axis travel ±51 mm X-axis travel 236 mm Tool turret with 24 positions on BMT65 Programmable tailstock Tool probe Part catcher Chip conveyor Tool holders: 9 standard Powered tool holders: 2, 1/1

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,343 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,282 mm, total width: 4,039 mm, table width: 914 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 11,250 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 40, tool weight: 5,400 g, product length (max.): 4,827 mm, number of axes: 3, This 3-axis Haas VF-8 vertical machining centre was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the Haas VF-8 vertical machining centre we have for sale. Contact us for further details. • CNC control • Haas CNC control, Classic generation • 15-inch colour LCD • USB port • Program memory: 1 MB • Remote jog handle with colour display • Axis travels and feed rates • Spindle nose to table distance: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Maximum cutting feed rate: 12.7 m/min • Worktable • Table dimensions: 1626 × 914 mm • Max evenly distributed table load: 1814 kgSpindle • Spindle taper: 40 taper • Maximum spindle speed: 8,100 rpm • Spindle power: 15 kW • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tapping • Tool changer • Side-mounted tool changer: 40 positions • Coolant and chip removal • Through-spindle coolant: 20 bar, 22 L/min • ACF additional coolant filtration system: 25 µm • Programmable coolant nozzle position • Coolant system with pull-out coolant tank • Screw-type chip auger • Probing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles • PMDS probe interface, internal power supply and wiring • Spindle orientation, coordinate rotation and macros • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead for machining complex contours using three-axis interpolation • 4AXD fourth-axis preparation, including connections and wiring. Rotary table not included • APC-READY automatic pallet changer preparation, including eight additional functions, macro support and wiring. Pallet changer not specified as included Additional equipment Cedpfxs Adz Ils Ap Dehd • Ball screw thermal compensation • Fully enclosed machining area with sliding front doors and hinged side windows • Program memory lock • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting • CABCOOL CNC control cabinet cooling unit Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2018, Technical details: Chedszxz Hgopfx Ap Djd x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm Chedpfjzh Eh Tex Ap Ded • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Spindle Speed 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, Chsdpfx Aj Ahww Dsp Djd HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) Chjdsvgmr Ijpfx Ap Djd WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. Cjdpfxo Ahxvaj Ap Dshd - Table Dimensions: 1,575 × 584 mm- Maximum Table Load: 1,814 kg- Spindle Taper: CT 50 / BT 50- Tool Changer Capacity: 30+1 pockets- Rapid Traverse (X/Y/Z): 18 m/min- Coolant Tank Capacity: 360 L- Machine Weight: approx. 7,371 kg- Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm- Supply Voltage: 440 V - Phase: 3-Phase - Frequency: 50/60 Hz- Full Load Current: 55 A- Maximum Load Current: 50 A- Wiring Diagram Number: 96 / 0284- CE Marked: Yes

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Chodpfxozr Nf Dj Ap Djd Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Enclosed Guarding

Condition: good (used), Year of construction: 2006, functionality: fully functional, Machine parameters: Swing over bed: Chsdpjz S Hy Refx Ap Ded 406 mm Max. turning length: 1219 mm Description: The machine is in good technical condition, and a test run is possible upon prior agreement. Haas CNC control. Max. turning diameter 406 mm / 16". Max. turning length 1,219 mm / 48". Distance between centers 1,219 mm / 48". Swing over cross slide / carriage approx. 282 mm / 11.1". X-axis travel 203 mm / 8". Z-axis travel 1,219 mm / 48". Spindle A2-6. Spindle bore 76.2 mm / 3.00". Spindle speed 0–2,000 rpm. Spindle power 12 HP / approx. 8.9 kW. Torque approx. 203 Nm at 150 rpm. Chuck usually 10" / 254 mm. Tailstock manual, depending on configuration. Weight approx. 2,087 kg. Machine dimensions approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A depending on configuration.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1575 x 584 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 (Showroom machine) • Spindle Nose to Table (max): 32.9 in / 836 mm • Spindle Nose to Table (min): 7.9 in / 201 mm • Spindle Max Torque: 340.0 ft-lbf @ 700 rpm / 460.0 Nm @ 700 rpm • Spindle Drive System: 2-Speed Gearbox • Table Length: 62.0 in / 1575 mm • Table Width: 23.0 in / 584 mm • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • T-Slot Center Distance: 3.15 in / 80 mm • Number of Std T-Slots: 7 • Max Weight on Table (evenly distributed): 4000 lb / 1814 kg • Max Cutting Feedrate: 500 ipm / 12.7 m/min • Rapid Traverse (X, Y, Z): 710 ipm / 18.0 m/min • Max Thrust X: 3400 lbf / 15124 N • Max Thrust Y: 4100 lbf / 18238 N • Max Thrust Z: 5600 lbf / 24910 N • Tool Changer Type: SMTC (Side-Mount Tool Changer) • Tool Capacity: 30+1 • Max Tool Diameter (full): 4.0 in / 102 mm • Max Tool Diameter, Large (adjacent empty): 7.0 in / 178 mm • Max Tool Length (from gage line): 16.00 in / 406 mm • Tool-to-Tool Time (avg): 4.20 s Csdpfx Apjz Nlyqo Dohd • Chip-to-Chip Time (avg): 6.30 s • Coolant Capacity: 95 gal / 360 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC (70 A Full Load) • Input AC Voltage (3 Phase) - High: 440 VAC (35 A Full Load) • Domestic Shipping Pallet Dimensions: 168.0 in x 102.0 in x 125.0 in / 427 cm x 260 cm x 318 cm • Export Crate Dimensions: 168.0 in x 102.0 in x 130.0 in / 427 cm x 260 cm x 331 cm • Shipping Weight: 16250 lb / 7371.0 kg Additional equipment • Machine vise mounted on T-slot table • Air gun attachment • Spray container and cleaning brush holder mounted on control arm console Technical Specification Taper Size BT 50

Condition: ready for operation (used), A small universal tool grinding machine Haas Trossingen is available. Grinding spindle diameter: 60mm-90mm, grinding wheel diameter: 175mm, taper: 15mm. The machine has been overhauled. An on-site inspection is possible. Chsdpfxsyyb Txe Ap Djd

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Mini Mill was manufactured in 2024. It features an X-axis travel of 406 mm, Y-axis travel of 356 mm, and Z-axis travel of 381 mm. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Table (~ max): 19.0 in (483 mm) • Spindle Nose to Table (~ min): 4.0 in (102 mm) • Spindle Max Rating: 10.0 hp (7.5 kW) • Spindle Max Torque: 45.0 ft-lbf @ 500 rpm (61.0 Nm @ 500 rpm) • Spindle Drive System: Direct Speed, Belt Drive • Bearing Lubrication: Grease Packed • Cooling: Air Cooled • T-Slot Width: 0.626 in to 0.630 in (15.90 mm to 16.00 mm) • T-Slot Center Distance: 4.33 in (110 mm) • Number of Std T-Slots: 3 • Max Cutting Feedrate: 650 ipm (6.5 m/min) • Rapids on X / Y / Z: 800 ipm (20.3 m/min) • Axis Motors Max Thrust (X, Y, Z): 2000 lbf (8896 N) • Tool Changer Type: Carousel • Max Tool Diameter (full): 3.5 in (89 mm) • Max Tool Length (from gage line): 12.00 in (305 mm) • Tool-to-Tool (avg): 4.20 s • Chip-to-Chip (avg): 5.00 s • Coolant Capacity: 45 gal (170 L) • Air Required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi (5.5 bar) • Input AC Voltage (1 Phase): 220 VAC, Full Load Amps: 40 A • Input AC Voltage (3 Phase Low): 220 VAC, Full Load Amps: 25 A • Input AC Voltage (3 Phase High): 440 VAC, Full Load Amps: 13 A • Domestic / Export Pallet Dimensions: 90.0 in x 80.0 in x 92.0 in (229 cm x 203 cm x 234 cm) • Shipping Weight: 4450 lb (2018.5 kg) Additional equipment • Renishaw Wireless Intuitive Probing System (WIPS) with OTS table probe installed • Flexible coolant nozzle assembly Technical Specification Taper Size BT 40 Chjdpfx Ajz Nywksp Ded

Condition: excellent (used), functionality: fully functional, rotary table diameter: 310 mm, The TR310 is a dual-axis tilting rotary table that provides maximum rigidity and accurate performance for 3+2 and full 5-axis machining of medium to large parts. Scale feedback on the A (tilting) axis improves positioning accuracy and repeatability. Add 4- and 5-axis capabilities to your machine. Codpfxeztakaj Ap Dohd Easy plug-and-play connection to Haas machines. Industry-leading performance and capabilities. Heavy-duty design.

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Chods Afwinspfx Ap Ded machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). Chodpsz Rqmrjfx Ap Dod With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg.

Condition: ready for operation (used), Year of construction: 2025, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, overall weight: 6,464 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2025. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool capacity of 30+1. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-750 universal machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Platter (~ max): 24.0 in / 610 mm • Spindle Nose to Platter (~ min): 4.0 in / 102 mm • Spindle Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm • Spindle Drive System: Inline Direct-Drive • Spindle Taper: CT40 | BT40 | HSK-A63 • Spindle Bearing Lubrication: Air / Oil Injection • Spindle Cooling: Liquid Cooled • B Axis (Tilt) Travel: +120° to -35° • B Axis Max Speed: 170 °/sec • B Axis Continuous Torque: 2240 ft-lbf / 3037 Nm • B Axis Brake Torque: 2000 ft-lbf / 2712 Nm • C Axis (Rotation) Travel: 360° • C Axis Max Speed: 179 °/sec • C Axis Continuous Torque: 1854 ft-lbf / 2514 Nm • C Axis Brake Torque: 900 ft-lbf / 1220 Nm • Max Part Swing: 27.0 in / 686 mm • Platter Diameter: 19.70 in / 500 mm • Max Weight on Platter: 660 lb / 300.0 kg • Max Weight on Platter w/ Pallet Pool: 200 lb / 90.7 kg • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Number of Std T-Slots: 7 • T-Slot Center Distance: 2.48 in / 63 mm • Max Cutting Feedrate: 833 ipm / 21.2 m/min • Rapid Feedrate (X, Y, Z): 1200 ipm / 30.5 m/min • Max Thrust X / Y: 3300 lbf / 14680 N • Max Thrust Z: 4050 lbf / 18015 N • Tool Changer Type: Side-Mount Tool Changer (SMTC) • Tool Capacity: 30+1 • Max Tool Diameter (full): 2.5 in / 64 mm Cedpfx Apez Nmigo Dehd • Max Tool Diameter (adjacent empty): 5.0 in / 127 mm • Max Tool Length: 12.00 in / 305 mm • Tool-to-Tool Time (avg): 1.80 s • Chip-to-Chip Time (avg): 2.40 s • Coolant Capacity: 55 gal / 208 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Air Pressure Min: 80 psi / 5.5 bar • Electrical Input AC Voltage (3 Phase): 220 VAC (70 A) / 440 VAC (35 A) • Shipping Weight (Standard): 14250 lb / 6463.8 kg Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes Chedjz Ah S Dspfx Ap Dod

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery with Touch screen control, with product pump In good condition. with mondotherm Codpjf Azwzjfx Ap Dohd

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE - Year of manufacture: 2008 - Type: Vertical CNC machining center - Technical condition: fully operational - Servo drive operating time: 3,096 h - Motion time: 594 h Csdj Afypkjpfx Ap Djhd - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.