Used Gripper for sale (735)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 46,810 h, functionality: fully functional, machine/vehicle number: 11450000153, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, total height: 3,393 mm, overall weight: 11,670 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 46,160 h, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, Horizontal tool changer with double gripper 100-position tool magazine HSK63 Coolant tank 600 l Chip conveyor Rotating viewing window 3D path control Millplus IT NC rotary table Ø 1100 mm x 900 mm, load capacity up to 2000 kg Motor spindle HSK-A63, spindle speed up to 18,000 rpm Universal milling head Tool holder Tool magazine Heidenhain TS641 touch probe Electronic handwheel Oil and emulsion separation system High-pressure coolant system Spray gun with pump Axis travel X/Y/Z each 1000 mm Rotary table 0-360° (C-axis) and swiveling head -10 to 180° (B-axis) Laser for tool measurement Chain magazine with 60 tool positions Band filter system with 980 liters Chain magazine 1.9 tons Pedpfxew A Nimj Aa Eerf Repairs 2022: - Replacement of the spindle at 34,661 operating hours Repairs 2019: - Replacement of X/Z sliding plate including guides of the Z and X axes - Replacement of ball screw drive of the Z axis Defect 2025 - A hose has a crack (see picture in the gallery). Depending on further use, we can repair this if needed. Hour meter 1: 117,755 h Hour meter 2: 46,810 h

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Podpfx Aajxvrbio Esrf Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: good (used), Year of construction: 2021, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, We offer you: Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 95 monoBlock Year of manufacture: 2021 Control: Celos with Siemens 840D sl Operate Travels: - X-axis travel: 950 mm - Y-axis travel: 850 mm - Z-axis travel: 650 mm - C-axis: 360° - A-axis: +/- 120° Main spindle: - Speed: 20,000 rpm - Drive power (40/100%): 25 / 35 kW - Torque: 130 / 86 Nm - Tool holder: HSK-63A Worktable: - Fixed table with integrated rotary table - Table diameter: C-axis 850 x 750 mm integrated in fixed table 1,000 mm x 750 mm - Max. table load: 1,000 kg - Max. workpiece dimensions: Ø 1,040 mm (clampable) / Ø 850 mm (machinable), height 590 mm Tool changer: - Number of tool positions: 60 - Tool change time (chip-to-chip): 5.9 s - Max. tool diameter: 80 / 160 mm - Max. tool length: 420 mm - Max. tool weight: 8 kg Rapid traverse: - Rapid traverse speed (X/Y/Z): 40 m/min - Max. feed speed (X/Y/Z): 40,000 mm/min - Power-on hours: approx. 25,300 h - Operating hours: approx. 7,200 h Technical features and accessories: - Double-gripper tool changer - MPC – Machine Protection Control - Economic Production Package (GER / EU) - Production package: Scraper flight conveyor with coolant system 600 l / 160 gallons Paper band filter Internal coolant supply, 40 bar / 23 l/min, through the spindle center (AD) External coolant supply, 4 bar – 40 l/min (theoretical pump capacity) Chip flushing in the cabinet door (no standard coolant tank) - Spray gun for chip cleaning - Air blast cooling through the spindle center, selectable via M function - Chip flushing in the cabin door: 1.5 bar / 60 l/min (theoretical pump capacity, recommended for high chip volumes) - Coolant ring nozzle for the vertical head: 16 water jets, 7 air jets - Mechanical and electrical interface for oil and emulsion mist extractor - Infrared probe, type Renishaw PP60 optical (OMP 60) - Tool measurement in the work area, Blum Laser DIGILOG - 3D quickSET preparation - SGS – Spindle Growth Sensor - Increased accuracy - Electronic handwheel - ATC (Application Tuning Cycle), programmable feed parameter selection for the machining process: accuracy / surface quality / speed - DECKEL MAHO MDynamics package - IoTconnector - Machine Data Connector (MDC) - NETservice - SERVICEcamera - 3D data model in STEP format for integration into CAD systems Prjdpfx Aaex Ekt Ej Ejf The clamping devices shown are not included in the scope of delivery. Accessories and depicted tools are only included if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: new, FACTORY-NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 650 mm Y-axis: 700 mm Z-axis: 645 mm Table diameter: 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Pjdpfehy Artox Aa Esrf ATC – automatic tool changer with double gripper: 30 stations (expandable up to 80 tools optional) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered / Only inquiries from Germany will be processed.

Condition: used, Year of construction: 2000, Technical Specifications & Performance Data The Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction. Pedpfox E Snqjx Aa Eerf Manufacturer: Bertolaso Model: Syncronia 16-16-1-840 Year: 2000 Container type: Glass bottles Rinser: 16 grippers with penetrating nozzle and double inert gas treatment Filler type: Gravity/light depression with nitrogen support Corker: Single-head straight corking with inert gas and vacuum corking Formats: Compatible with 0.375L and 0.75L bottle formats Electrical: 400 V, 50 Hz CIP readiness: Integrated CIP with stainless steel dummy bottles Model code & configuration: Syncronia 16-16-1-840 Advanced Automation & Control Systems The monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production. Production Line Integration Capabilities Designed for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts. Machine Condition & Maintenance History The machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability. Operational Performance & Versatility This monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks.

Condition: used, Year of construction: 2010, turning length: 6,500 mm, turning diameter: 880 mm, spindle bore: 165 mm, controller manufacturer: Siemens, controller model: 840 D, _____ In General: Year of manufacture:2010 Control system:Siemens 840 D Rotation diameter:900 mm Turning diam.: 880 (750) mm Turning length:approx. 6,500 mm Spindle bore: 165 mm Tool holder:Capto C 8 Spindle: Speed:1,600 rpm Power: 60 kW Torque:4,472 Nm Prjdpfxjx Axylj Aa Ejf C-axis: 0,001° Spindle boar:165 mm 3-Jaw Chuck: SMW Autoblock KNCS-N-630-165 Tool carrier (X/Y/Z): Technology:Swivel head with milling spindle Speed:6,000 rpm Power:30 kW Tool holder:Capto C 8 Torque:315 Nm X-axis:920 mm Y-axis:500 mm (-200/+300 mm) Z-axis:6,870 mm B-Axis: 200° (-110° / +90°) Tailsstock + Steady rest: Quill diameter:180 mm Quill stroke:200 mm Steady rest slides: 2 pieces, 400 mm wide Steady rest I: SMW Autoblock SLU (45-310 mm) Steady rest II: SMW Autoblock SLU (125-460 mm) Tool magazin I: Technology: Wheel magazine (double) Number of stations: 72 Tool changer: Double gripper on shuttle Tool diameter max.: 110 mm (250 mm) Tool length max.: 800 mm Tool weight max.: 25 kg Tool magazin II: Technology: Pick-up magazine Max. usable length: 1,550 mm Max. usable weight: 150 kg Equipment: Tool magazine:72 stations Chip disposal:Chip conveyor Coolant supply:Internal coolant system Coolant temperature control:Immersion recooler Workpiece measurement: Touch probe Steady rest:2x SMW Autoblock Lynette 3-Jaw chuck: SMW Autoblock KNCS-N-630-165 Tool holder: Various Capto C8

Condition: ready for operation (used), Year of construction: 2006, A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible. Psdpfx Aox E Advja Eerf

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Pedpfev Nywvsx Aa Eorf Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, Used machine - very good condition - checked and fully functional. NEW VERSION - AL7 Year of construction: 2016 Cutting technology and compactness Universal bread cutter: cutting all types of bread (even fresh from the oven) without oiling the knife Soft sound: noise-optimized cutting Long service life of the circular knife due to special grinding Hygiene and handling Automatic start at the push of a button after closing the safety cover Automatic slice holder that supports the slices during the cutting process and thus facilitates the removal of bread Direct access to the knife area for cleaning and knife replacement security Reliable safety system with automatic gripping of the bread and automatic residual piece ejection Thanks to the absolutely secure locking of the lid, there is no risk of injury to the customer in the self-service area: there is no access to the knife or the gripper hook when the safety lid is open GS mark (mark of the trade association for tested safety / certificate of compliance with the requirements of the Equipment and Product Safety Act) Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Prjdpex Rch Esfx Aa Ejf Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, FACTORY NEW BED MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply, 36 bar Additional Equipment: ATC tool changer with double gripper, 24 positions Pjdpfxjh Ekrte Aa Eorf Double hinge belt chip conveyor (longitudinal), one front and one rear 4th axis preparation (rotary table) Perimetric enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2000, Technical Specifications & Performance Data The Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction. Manufacturer: Bertolaso Model: Syncronia 16-16-1-840 Year: 2000 Container type: Glass bottles Rinser: 16 grippers with penetrating nozzle and double inert gas treatment Filler type: Gravity/light depression with nitrogen support Corker: Single-head straight corking with inert gas and vacuum corking Formats: Compatible with 0.375L and 0.75L bottle formats Electrical: 400 V, 50 Hz CIP readiness: Integrated CIP with stainless steel dummy bottles Model code & configuration: Syncronia 16-16-1-840 Predpfsx E Snkex Aa Ejf Advanced Automation & Control Systems The monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production. Production Line Integration Capabilities Designed for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts. Machine Condition & Maintenance History The machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability. Operational Performance & Versatility This monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks.

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: Pjdpfx Aohvan Ioa Ejrf • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º B-axis degrees: 0-190º Feed rates m/min: 60 Pedjxur Sxopfx Aa Eorf Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN Prodpfxjrpk Axe Aa Eof 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: new, Year of construction: 2025, functionality: fully functional, pallet changer: manual, Samzon MPT1700-10 Pallet Turner is equipped with the latest electronic and mechanical components. The traction group has a 2000w electrical engine. The oleo-dynamic group has a 3000w engine with an incorporated pump to obtain elevate operative times. Besides the forks are controlled by an electro-valve allowing the operator to handle their movements through simple switches over the control board. The gripper unit is made of a solid loom over there are rested on aluminum controls of polyzene runners with a high resistance and long duration. Beside the gripper is also equipped with a support surface for the paper, aligned and precise. The paper or any kind of palletizable material can also be lifted and turned over without pressure between the forks, leaving it up to the operator the choice regarding how to work. *Servo-steering – Easy movement of steering wheel. *Hydraulic locking-pawl for very easy handling of rotation. Podpfx Aasx Ebn Rs Esrf

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW FLOOR TYPE MILLING MACHINE Control and Motors: Two HEIDENHAIN TNC 640 digital CNC controls – one at the machine’s front, one at the rear in the cabin HEIDENHAIN package (motors, measuring systems and portable handwheel) Podjvrv Suspfx Aa Ejrf Additional equipment: Tool changer with double gripper, 60 stations Double hinge-belt chip conveyor (longitudinal), one in front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2000, Technical Specifications & Performance Data The Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction. Manufacturer: Bertolaso Model: Syncronia 16-16-1-840 Year: 2000 Container type: Glass bottles Rinser: 16 grippers with penetrating nozzle and double inert gas treatment Filler type: Gravity/light depression with nitrogen support Corker: Single-head straight corking with inert gas and vacuum corking Psdox E Sm Topfx Aa Eorf Formats: Compatible with 0.375L and 0.75L bottle formats Electrical: 400 V, 50 Hz CIP readiness: Integrated CIP with stainless steel dummy bottles Model code & configuration: Syncronia 16-16-1-840 Advanced Automation & Control Systems The monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production. Production Line Integration Capabilities Designed for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts. Machine Condition & Maintenance History The machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability. Operational Performance & Versatility This monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Psdpfxew Edbpe Aa Eorf Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Condition: like new (used), Year of construction: 2015, operating hours: 26,156 h, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens 840D, workpiece length (max.): 850 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 500 kg, total height: 3,100 mm, total length: 4,150 mm, rotational speed (min.): 1,200 rpm, spindle speed (min.): 12,000 rpm, Year of manufacture: 2012 CNC Control: Siemens 840D Axes X-axis travel (mm): 600 Y-axis travel (mm): 700 Z-axis travel (mm): 600 C-axis indexing (degrees): 360° (0.001) B-axis indexing (degrees): -30°/180° (0.001) Feed rates (m/min): 60 Rapid traverse (m/min): 60 Axis acceleration (m/s²): 6/6/5 NC Milling/Turning Table: Number of pallets: 2 Pallet dimensions (mm): Ø630 Max. workpiece size (D x H) mm: Ø630x850 Max. workpiece weight (kg): 500 Table rotation speed (rpm): 1200 Spindle Max. spindle speed (rpm): 12,000 Spindle drive power (kW): 35/24 (40% duty cycle / continuous) Spindle torque (Nm): 111/77 Cooling Coolant supply through spindle (bar): 40 Tank capacity (liters): 980 Tool system Tool holder: HSK-A 63 Prjdpfxsxuiibs Aa Esf Number of tools in magazine: 60 Tool changer type: Double gripper With free adjacent positions (mm): 120 With occupied adjacent positions (mm): 80 Max. tool length (mm): 450 Max. tool weight (kg): 15 Chip-to-chip time (sec.): 4 Equipment Electronic handwheel Chip conveyor Infrared probe Rotating viewing windows Rinsing gun Operating mode 4 Compressed air through spindle selectable via M-function NC rotary swivel table 3D quickSET MPC – Machine Protection Control Machine running hours: Power-on hours: 26,156 Spindle working hours: 16,472 Base machine: Dimensions/Weight Length (mm): 4,150 Height (mm): 3,100 Weight (kg): 10,000

Condition: used, Year of construction: 2015, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2015 Control : Hurco MAX5 Speed : 10000 rpm Movement X/Y/Z : 762/508/610 mm Tool holder : SK 40 In General: Year of manufacture:2015 Control system:Hurco MAX5 Travel X/Y/Z:762/508/610 Speed:10,000 rpm Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK 40 Work table: Clamping surface:1,020 x 510 mm Maximum table load:1,300 kg : Tool magazin: Prsdpfx Aexz I A Hoa Eef Technology:Drum magazine Tool changer:Double gripper Number of stations:24 Max. tool diameter:81 (120) mm Max. tool length:300 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system NC rotary table:4th axis (A-axis) Tool magazine:30 stations Tool measurement:Renishaw measuring probe

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Predpfx Aaeiwbfuo Eef Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Prjdpfx Asq Ixc Tsa Eef Spindle Performance: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2000, Technical Specifications & Performance Data The Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction. Manufacturer: Bertolaso Model: Syncronia 16-16-1-840 Year: 2000 Container type: Glass bottles Rinser: 16 grippers with penetrating nozzle and double inert gas treatment Filler type: Gravity/light depression with nitrogen support Prjdpfsx E Sndox Aa Eef Corker: Single-head straight corking with inert gas and vacuum corking Formats: Compatible with 0.375L and 0.75L bottle formats Electrical: 400 V, 50 Hz CIP readiness: Integrated CIP with stainless steel dummy bottles Model code & configuration: Syncronia 16-16-1-840 Advanced Automation & Control Systems The monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production. Production Line Integration Capabilities Designed for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts. Machine Condition & Maintenance History The machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability. Operational Performance & Versatility This monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting length (max.): 3,800 mm, saw blade diameter: 380 mm, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, main saw diameter: 380 mm, overall weight: 4,400 kg, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Pedjx Nc Ayjpfx Aa Eorf Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: TNC 7, _____ Description: Year of manuf. : 2024 Control : Heidenhain TNC 7 Speed : 16000 rpm Movement X/Y/Z : 2100/2100/1250 mm Tool holder : HSK 100 In General: Year of manufacture:2024 Control:Heidenhain TNC 7 Travel distances X/Y/Z:2,100/2,100/1,250 mm Tool holder:HSK 100 Milling head: Technology:Universal milling head with controlled B-axis Spindle:Motor spindle Speed:16,000 rpm Max. power:52 kW Max. torque:404 Nm Tool holder:HSK 100 Media feed:Blowing air + cooling lubricant NC rotary table: C-axis:360° Clamping surface:1,700 mm Tool magazin: Technology:Wheel magazine Tool changer:Double gripper Number of stations:123 Cone cleaning:Rotating brushes Equipment: Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Coolant temperature control:Immersion recooler Position measuring systems:Direct in all axes Accuracy package:µ-Precision package Workpiece measurement:Renishaw OMP 600 Tool measurement:BLUM laser Kinematics measurement:3D quickSET Pjdpoxzxacofx Aa Eerf Process monitoring:Operating mode 4 Machine protection:MPC (quick shutdown) Digital manufacturing:IOT Connector, MDC, NETservice CAD import:DXF, STEP, and IGES formats Emulsion mist separator:Mechanical Setup mode:Electronic handwheel