Used Grinding Spindle for sale (15,298)

Condition: used, Number of working hours 1717 h Ppsdpfx Asywnuqjcvsp

Condition: used, Year of construction: 1991, SCHÜTTE SF 42 DNT Maximum bar diameter round / square: 42 / 36 mm Spindle pitch circle diameter: 340 mm Bar feed: 125 mm Longitudinal slide travel (total / working): 125 / 100 mm Cross slide travel (total / working): Top: 60 / 36 mm Middle: 60 / 36 mm Lower: 70 / 44 mm Spindle speeds (stepless): 315 – 2,240 rpm Main times (stepless): min. / max. 0.88 – 125 sec Secondary times: 1.1 – 1.4 seconds Ppedpfjyxb Umjx Acvop Creep speed: 3 rpm Main drive: 22 kW Dimensions (including bar guide): approx. L x W approx. 7.3 x 1.7 m Weight: approx. 10 t Voltage: 400 V / 50 Hz Scope of delivery: SCHÜTTE SF 42 DNT machine Bar loader

Condition: used, Year of construction: 1995, SCHÜTTE SF 26S DNT Maximum bar diameter, round / square: 26 / 19 mm Spindle pitch circle diameter: 270 mm Bar feed: 125 – 290 mm Longitudinal travel of slides (total / working): 125 / 98 mm Cross slide travel (total / working): Top: 40 / 25 mm Middle: 40 / 25 mm Bottom: 50 / 31 mm Spindle speeds (stepless): 530 – 3,750 rpm Psdpfxeyxb Nde Acvspp Main times (stepless): min. / max. 0.72 – 100 s Secondary times: 0.90 – 1.1 seconds Creeping speed: 3 rpm Main drive: 22 kW Dimensions (including bar guide): approx. L x W, approx. 7.2 x 1.6 m Weight: approx. 6.8 t Voltage: 400 V / 50 Hz Scope of delivery: SCHÜTTE SF 26S DNT machine Bar feeder

Condition: used, Year of construction: 2000, INDEX MS42C Maximum bar diameter: 42 mm Spindle pitch circle diameter: 320 mm Main spindle: Power clamping with INDEX spring-loaded hollow clamping cylinder and collet Maximum clamping stroke: 4 mm Clamping force: 26 kN Main spindle drive: Rated power: 5 kW Rated speed: 1,500 rpm Rated torque: 32 Nm Maximum speed: 5,000 rpm Synchronous spindle and rotary tool holder: Rated power: 5.3 kW Rated speed: 1,500 rpm Rated torque: 34 Nm Maximum speed: 5,000 rpm Cross slides: Max. number: 10 Travel (X): 70 mm Travel (Z): 140 mm Max. feed force +X: 11.4 kN Max. feed force −X: 7.9 kN Max. feed force +Z: 11.4 kN Max. feed force −Z: 7.9 kN Rapid traverse: 15 m/min Longitudinal spindles: Quantity: 6 Stroke (Z): 240 mm Max. feed force +Z: 15.1 kN Max. feed force −Z: 11.6 kN Rapid traverse: 15 m/min Longitudinal slide units: Max. number: 6 Travel (X): 70 mm Max. feed force +X: 11.4 kN Max. feed force −X: 7.9 kN Rapid traverse: 15 m/min Synchronous spindle: Chuck system: spring-loaded clamping cylinder Maximum clamping diameter: 42 mm Chuck outside diameter: 112 mm Jaw stroke: 1 mm Max. total clamping force: 13 kN Weight: approx. 11,000 kg Scope of delivery: KNOLL KTS 32-48-T hydraulic unit CUCCHI PLURIMANDRINO bar feeder, year 2000 Workshop cabinet with machine accessories KNOLL VRF 500 Psdsymc S Ujpfx Acvopp KNOLL 400 S-1/250 chip conveyor

Condition: used, Year of construction: 1994, operating hours: 62,283 h, bar diameter (max.): 26 mm, spindle bore: 230 mm, total width: 1,500 mm, total length: 7,000 mm, total height: 2,000 mm, INDEX MS 25E Maximum bar diameter round / square: 26 / 18 mm Spindle circle diameter: 230 mm Max. bar length: 100 mm Longitudinal slide travel (total / working / adjustment): 85 / 50 / 330 mm Cross slide travel (total / working / adjustment): 36 / 16 / 20 mm Spindle speeds (12 / 24 steps with 1.25 / 1.12): 366 – 5,020 rpm Main drive: 15 kW / 1,450 rpm Voltage: 400 V / 50 Hz Operating hours: 62,283 h Ppodpfx Acjymdchjvsp Working hours: 4,916 h Dimensions (incl. bar guide): approx. L x W x H 7 x 1.5 x 2 m Weight: approx. 6 t Scope of delivery: INDEX MS 25E machine

Condition: used, Year of construction: 2007, operating hours: 26,721 h, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, total width: 1,800 mm, total length: 3,200 mm, total height: 2,850 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 12 mm, travel distance Z-axis: 85 mm, rotational speed (min.): 10,000 rpm, overall weight: 6,500 kg, INDEX MS 22C Work Spindles: Quantity: 6 Maximum bar diameter: 22 mm Spindle pitch circle diameter: 230 mm X / Z travel: 62 / 85 mm Rapid traverse: 15 m/min Synchronous hollow spindle drives: Quantity: 6 Maximum speed: 10,000 rpm Nominal speed: 8,300 rpm Power: 15 kW at 18 Nm Chuck diameter: 110 mm Rotating synchronous spindles: Quantity: 2 Z stroke: 120 mm Feed force: 2.5 kN Rapid traverse: 15 m/min Rotational angle: 132° Counter spindle: Maximum speed: 10,000 rpm Nominal speed: 8,000 rpm Power: 9.2 / 12 / 14 kW at 11 Nm Tool carriers: Ppsdpfxsymaw Is Acvop Maximum quantity: 11 X / Y / Z travel: 62 / ±12 / 85 mm CNC control: C 200-4D (Siemens Sinumerik 840D) Dimensions (approx. L x W x H): 3.2 x 1.8 x 2.85 m Weight: approx. 6.5 t Operating hours: 61,997 h Machining hours: 42,235 h Scope of supply: INDEX bar feeder Bar feeder IEMCA SIR MS22 P, year 2008 Coolant unit with belt filter Chip conveyor KNOLL 400 S-1/290 Coolant filtration unit KNOLL FKA/1780 RSF 100 Workshop cabinet with machine accessories

Condition: used, Year of construction: 2002, Technical Details: SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Longitudinal slide travel (total / working): 63 / 50 mm Podpfxoymdd So Acvspp Cross slide travel (total / working): 32 / 20 mm Spindle speeds (infinitely variable): 800 – 10,000 rpm Main cycle times (infinitely variable): min./max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Feed motor torque: 18 Nm Dimensions (including bar guide): approx. L x W approx. 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: - Bar feeder Pra 52 P IEMCA - RUEZ KF0WW2/312 DAS, year 2002

Condition: excellent (used), functionality: fully functional, grinding length: 600 mm, grinding width: 500 mm, total height: 1,840 mm, total length: 2,900 mm, total width: 1,840 mm, grinding height: 230 mm, table length: 600 mm, table load: 200 kg, table width: 200 mm, For sale is a DUE Grind surface grinding machine, brand Asyst, model A525 PNC 100. This machine has been completely overhauled from a Jung 525 surface grinder. A key feature of this machine is its ability to operate both conventionally as well as with CNC control. The machine is in very good, near-unused condition and is ready for immediate use. Pedpoyx D Ipofx Acvopp Technical Data: Year of manufacture: Table length: 600 mm Table width: 200 mm X-axis traverse (stroke): 600 mm Y-axis (grinding height): 500 mm Z-axis travel, end positions +/-: 230 mm Table speed X-axis: 0.3-25 m/min Magnetic chuck dimensions: 600x200 mm Optional 3-point dresser: 350x200 mm Max. workpiece weight (incl. magnet): 200 kg Working area: 400 mm Y-axis traverse speed: 0-1,000 mm/min Z-axis traverse speed: 0-1,000 mm/min Y-axis positioning accuracy: 0.001 mm Z-axis positioning accuracy: 0.001 mm Y-axis measuring system resolution: 0.0001 mm Grinding wheel dimensions: 250x30x51 mm Spindle speed: 100-3,800 rpm Spindle motor power: 100-3,800 kW Automatic dressing with stationary diamond unit TA 3/5 Machine dimensions: 2,900x2,320x1,840 mm Weight: 2,300 kg Transport and loading can be organized Europe-wide at an additional cost if desired. Prices net plus VAT. Viewing is possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machines Purchase / Sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or would you like to sell your equipment? For more information or contact options, please visit our website.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Ppodenxi Uuspfx Acvjp Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Pedpfsnxi R Usx Acvjpp Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: excellent (used), Vema tilting spindle moulder Pjdsywwx Sepfx Acvopp Type: TFMSR-4 Spindle tilt: up to 45 degrees Spindle diameter: 40 mm Spindle length: 130 mm Spindle rotates left and right Univer power feed with 3 rollers Aigner Intergrall fence

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm boring diameter 100-500 mm control Sinumerik 840D Pedpfx Acewzmqrevspp

Condition: ready for operation (used), 1 grinding wheel, aluminium oxide: 200 Ø x 20 mm Grinding wheel speed: 2800 rpm Drive motor: 220 V, 0.9 kW Required space: 500 x 400 x 450 mm Pedpfxsyv Duks Acvspp

Condition: ready for operation (used), Grinding wheel dimensions: 175 x 25 mm Grinding wheel speed: 3000 rpm Psdpfoyv Dr Aox Acvepp Electrical connection: 220 V, 250 W Space requirement: 400 x 230 x 215 mm

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Pedsyudtpspfx Acvjpp Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: used, grinding diameter 250 mm grinding length 500 mm dimensions of grinding wheel 400 x 50 mm Ppedpfoxzuylex Acvsp In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D Pedpsxq R Haofx Acvopp work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1988, grinding diameter 250 mm grinding length 600 mm max. dia. of grinding wheel 355 mm max. width of grinding wheel 50 mm peripheral speed 2.000 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Pedpfxeynnvbo Acvepp

Condition: used, Year of construction: 1988, Year 1988 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Pedpfoxmk Eusx Acvspp Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Ppedpfx Aexc Nypecvjp Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm Ppsdexp R D Nspfx Acvsp grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Pjdpfx Aoxq Hkujcvopp Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Podsxuv Udspfx Acvjpp Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ppsdpfx Acexzuyrsvop Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Pjdpfx Aox H Andjcvopp