Used Grinding Dust Extraction for sale (10,281)

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. Gbodpfxepgnfde Afnoh 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction Gbodsl Dw U Djpfx Afnjh point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Sawdust extractor,dust extraction,self-cleaning filter,vacuum ALKO FU RG Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 5,5 Kw fan Capacity 5940 m3/h Filtration area 30m2 Vacuum 3000 Pa Air return with ventilation ducts and summer/winter flap Noise attenuator Manifold with pneumatic gates for connection with machines Control cabinet with technical documentation. Customs sluice Gbjdpfxsip Nqko Afneh Additional 3 kw transport fan for transporting sawdust from the customs sluice Inlet 4 x 250 mm Dimensions: height - 4.35m Width - 1.45m x 1.45m

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Gbjdpfxetixlbe Afneh Capacity - 8000 m3/h year of production : 1993 Inlet diameter - 400 mm Control cabinet with technical documentation included.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Gsdpfx Aouy N S Uefnobh Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Gbedonyhvqepfx Afnoh Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Godpfoxbf Rbjx Afnebh Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: excellent (used), Grinding table with extraction Work table 149x105cm Overall dimensions 149x105x160cmH + extraction spigot Gbsdpsh Uci Esfx Afnoh

Condition: used, Mobile Dust Extraction Fritz Moeller Gbjdpfoddxl Esx Afneh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Gedsw Hw Dgjpfx Afnsbh

Condition: used, Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), We offer this used CORAL EUROFILTER 300 dust extractor, year of construction 2010. Article: EUROFILTER 300 Serial number: 202 Voltage: 400/690 V Frequency: 50 Hz Power: 7.5 kW Rated speed: 2800 RPM Gsdpfx Afjygxbfsnjbh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1999, Höcker Polytechnik Clean Air Dust Extractor – Clean Air Unit Inlet nozzle: right Control cabinet Diameter of inlet nozzle: 300 mm Rated air flow: 5,320 m³/h Minimum air flow: 4,433 m³/h Gedpfx Aoyb T Ucefnsbh Filter area: 28 m² Filter cleaning: motorized shaking 3 collection bins, total capacity: 495 liters Filter material: polyester needle felt Negative pressure at Vmax: 2,700 Pa Design: mobile Overall length: 3,210 mm Motor power: 7.5 kW Electrical connection: approx. 400 Volt/50 Hz Location: ex stock 54634 Bitburg - immediately available -

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, volume flow: 6,000 m³/h, negative pressure: 2,700 Pa, intake manifold diameter: 300 mm, nominal flow rate: 5,060 m³/h, overall weight: 850 kg, total width: 900 mm, total length: 3,100 mm, total height: 2,000 mm, input voltage: 400 V, compressed air connection: 6 bar, nominal power: 7.5 kW (10.20 HP), input current: 16 A, Bin volume 3x165 l, jet-pulse cleaning. Housing is vacuum-tight and pressure surge resistant above 200 mbar, equipped with suction connection and non-return valve, antistatic and water- and oil-repellent filter elements with jet-pulse cleaning system. High-performance radial fan with three-phase motor of energy efficiency class IE3 is installed on the clean air side, featuring integrated exhaust silencing and air outlet grille. Unit is mounted on 2 swivel and 2 fixed castors. Includes 3 chip containers with discharge bags, a control system with CEE industrial connector, and integrated fire extinguishing system preconfigured for connection to local water supply (water connection 1/2", min. 0.5 bar). The control is designed for automatic operation. Automatic start control for up to 6 machines and automatic filter cleaning with runtime addition are included. For automatic start-up, either current transformer coils or volt-free contacts from the machine can be used. Gbodpfeyi Efcsx Afneh

Year of construction: 1997, condition: ready for operation (used), Offered: Vacumobilmobilentstauber year 1997. Extraction diameter 250mm, nominal volume flow 4241m³/h, minimum volume flow 3534m³/h, negative pressure at minimum volume flow 2350Pa (measured at the interface with a 4.0m hose Ø250mm), motor power 4.0kW/0.18kW, nominal speed 3000min⁻¹/900min⁻¹, weight approx. 630kg. Inspection is possible by appointment. Gedpfx Aexy R E Isfnebh

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Gjdpfx Afoyffx Isnebh Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Galvanized sheet steel construction - Space-saving due to compact design - Delivered ready for operation - ATEX - Explosion pressure resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller - IE4 efficiency class energy-saving motor - 4 large-volume collection containers, with liner bags - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning (“jet” cleaning) with time-controlled system for filter surface regeneration - PLC control with display, for 4 EPN 24V DC valves, 4 machine start contacts, and 1 start for external automatic switch-on (additional valve controls available at extra cost) - Connection cable, 5 m length, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - The ABC powder extinguishing agent is not suitable for metal fires or cooking fats and oils - Non-return flap, type-tested - Built in accordance with DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - Passed GS-HM-03 "H3" test - IE5 efficiency power pack - Start valve control: Z 16 - Motor power: 11 kW Gsdpfxox H Dahj Afnsbh - Nominal volume flow (Vnenn): 6927 m³/h at 20 m/s - Max. volume flow (Vmax): 8000 m³/h - Negative pressure at Vnenn: approx. 3100 Pa - Negative pressure at Vmax: approx. 2300 Pa - Collection volume: 495 l - Sound pressure level: < 73 dB(A) - Extraction port diameter: 350 mm Dimensions: 3930 x 1030 x 2560 mm Weight: approx. 1080 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2017, Used unit Year of manufacture: 2017 Extraction side: right Test mark: H 3 Nominal airflow: 3534 m³/h Max. negative pressure: 2750 Pa Connection diameter: 250 mm Filter area: 32 m² Dust class: "M", AWN 16 Motor power: 5.5 kW Filter regeneration: pneumatic With fire extinguisher as extinguishing device Godpox Twh Ssfx Afnjbh Sound pressure level: 70 dB(A) Incl. mounted switch cabinet Incl. forklift brackets Weight: 962 kg LxWxH: 3650x1540x2570 mm Availability: short-term Location: Flörsheim

Condition: good (used), Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens 2.2 kW Gbodpfx Afefd Hffeneh -Voltage: 560 V -Speed: 3515 rpm -Volume flow: 1425 m³/h -Connection input: Ø 148 mm -Connection output: 390 x 330 mm -Dimensions: 650/520/H470 mm -Weight: 52 kg

Condition: good (used), Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3.0 kW -Speed: 1420 rpm -Volume flow: m³/h -Pressure: Pa -without: housing -Impeller outside: Ø 430 mm -Impeller inside: Ø 270 mm -Sash: 100 x 180 mm Gjdocgan Sspfx Afnebh -Sheet metal plate diameter: 650 mm -Sheet metal plate bolt circle: 600 mm -Number: 3x fans available -Price: per piece -Dimensions: 400/650/H650 mm -Weight: 52 kg

Year of construction: 2003, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm Gjdpfx Aod Tir Nofnobh -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Condition: good (used), Year of construction: 2012, Centrifugal fan, dust extractor, fan, suction, dust blower, blower -Motor: Ziehl-Abegg ECblue .1R Godpfjfiqrfex Afnobh -Speed: 1580 rpm -Connection: input Ø 240 mm -Connection: output Ø 450 mm -Dimensions: 995/815/H1060 mm -Weight: 148 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: HEW type EEXF 132S/2 -Motor power: 4.6 kW -Speed: 2880 rpm -without: housing -Impeller outside: Ø 415 mm Godpfx Aofmd R Ujfnjbh Sheet metal plate hole circle: Ø 470/13 mm -Dimensions: Ø 500/595 mm -Weight: 68 kg

Year of construction: 1988, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm Gedpfscmuwqex Afnjbh -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Condition: used, Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW -Speed: 2840 rpm -max. volume flow: 0.41 m³/h -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm Gbodjcuauyepfx Afnsh -Impeller: Ø - mm -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg

Year of construction: 2003, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens type 1L4 206-6AA60-Z 200L -Motor power: 18.5 kW -Speed: 975 rpm Gjdpfx Ajd Tir Isfnobh -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg