Used Grinding Dust Extraction for sale (10,951)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Veneta Impianti FMVZ-C 144 – Complete Industrial Dust Extraction System, 31,100 m³/h Complete industrial dust extraction, filtration, pneumatic sawdust conveying and big-bag filling system manufactured by Veneta Impianti, Italy. The complete installation is fully operational and currently in daily industrial use. Inspection and demonstration under actual working conditions are possible. TECHNICAL SPECIFICATIONS - Model: FMVZ-C 144 - Rated filtration airflow: 20,000–31,100 m³/h Hodpfx Akj Agq Nxjisw - Main extraction fan: 37 kW - Frequency inverter-controlled fan starting - Total filtration area: 185 m² - Number of filter sleeves: 144 - Automatic mechanical filter cleaning - Motorized sawdust discharge screw conveyor - Galvanized steel construction *FILTERED AIR RETURN SYSTEM The filtration unit is equipped with a filtered air return duct and a manually operated diverter damper. The system allows warm filtered air to be returned to the production hall during colder periods, helping to reduce heating losses. PNEUMATIC SAWDUST CONVEYING AND BIG-BAG FILLING A separate closed-loop pneumatic conveying system includes a dedicated conveying fan, pipework, cyclone separator and jumbo-bag filling system. AUTOMATIC FIRE PROTECTION SYSTEM The filtration unit is equipped with an automatic, thermally activated water sprinkler fire protection system. Sprinklers are installed in the upper section of the filtration chamber, above the filter sleeves. The sprinkler installation is continuously supplied with pressurized water and is designed to activate automatically at 74 °C, according to the manufacturer's specifications. EQUIPMENT INCLUDED IN THE SALE - Veneta Impianti FMVZ-C 144 filtration unit - Main 37 kW extraction fan - Frequency inverter - Automatic filter cleaning system - Motorized discharge screw conveyor - Separate pneumatic sawdust conveying system - Cyclone separator and jumbo-bag filling system - Filtered air return system with manual diverter damper - Automatic water sprinkler fire protection system - Electrical control cabinet for the complete installation CONDITION The complete installation is fully functional and currently in daily industrial operation. Inspection and demonstration under actual operating conditions are available by prior arrangement. Technical documentation is available upon request.

Condition: used, Industrial Dust Extraction System, Dust Collection Unit, CORAL POLIVAL 2 ADPE, Used Machine Manufacturer CORAL S.p.A. (Italy) Model POLIVAL 2 ADPE Technical Specifications Hedjzh H Ubepfx Akisw Serial Number: 00000201 Rated Power: 4.0 kW Motor Speed: 2800 RPM (high-speed, high-suction fan) Operating Voltage: 400 V, Three-phase Construction: Weather-resistant, modular galvanized steel housing Extraction Surface: 3700 × 1100 mm Version: ADPE – designed for the safe extraction of potentially explosive fine dust Overall Dimensions Width: 3160 mm Depth: 1100 mm Height: 2010 mm Filter Unit Dimensions Width: 2930 mm Depth: 1100 mm Height: 950 mm

Condition: excellent (used), Year of construction: 2021, Extraction connection, D 140mm Hsdszxql Eepfx Akiew Chip collector capacity 200L Airflow rate [m³/h] 2500 3 kW, 400V

Year of construction: 2025, condition: like new (used), For sale is a mobile dust extractor from the manufacturer Blotenberg, model FILTERBLOC MOBIL-3000, with 0 operating hours. The unit has sustained minor damage, presumably from a collision, but this is not expected to affect its functionality. Hodpfx Ajz R Dhpskijw Manufacturer: Blotenberg Model: FILTERBLOC MOBIL-3000 Date of manufacture: 04/2025 Article number: OEM-7094 Power: 3.0 kW Voltage: 400 V Phases: 3P+PE Frequency: 50 Hz Protection class: IP55 Nominal air volume: 3,200 m³/h Max. negative pressure: 2,500 Pa Max. raw air connection: Ø 224 mm Filter area: 20 m² Weight: 180 kg Operating hours: 0 h Design: Mobile, can be moved Application: Extraction of dry, free-flowing dust and fumes Condition: Unused, with minor collision damage Documentation: Operating and maintenance manual available

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG – Advanced Industrial Dust Extraction System with Dual BIG-BAG Waste Collection The SCV11300TC VIBER BIG-BAG is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. The unit stands out with its use of two high-capacity BIG-BAG collection bags, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it provides effective extraction of sawdust, dust, and chips even during long-term continuous operation. Main Advantages of the Machine Two BIG-BAG collection bags – a unique market solution that increases waste storage capacity. VIBER system – automatic filter cleaning ensures constant extraction performance. TC housing – fully enclosed, sound-insulated construction reducing noise and vibrations. DAMAGE PROTECT system – mechanical protection preventing rotor damage caused by larger particles. REHEAT system – heat recovery from exhaust air, improving the energy efficiency of the facility. Design and Technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced rotor, ensuring stable, reliable operation and high extraction performance of 11,300 m³/h. The housing has been designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Precision and Work Efficiency Thanks to 64 polyester filters with filtration efficiency down to 5 microns, and the possibility of installing an additional HEPA filter, the unit provides safe and highly effective air purification. The high suction speed (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications Hjdpfx Akoudav Nsiow The SCV11300TC VIBER BIG-BAG is an ideal solution for: woodworking plants, furniture factories, operators of panel saws, edge banders, and sanding machines, industrial installations requiring a central dust extraction system. Standard Equipment VIBER system – automatic filter cleaning Two BIG-BAG collection bags Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT protection system Technical Specifications Parameter Value Power supply voltage 400 V Motor power 11 kW Motor speed 3000 rpm Filter type Polyester, 5 microns / filter category "G" Filter dimensions Ø160 × 960 mm Number of filters 64 pcs Filtration area 30 m² Inlet diameter 350 mm Outlet diameter 500 mm Extraction capacity 11,300 m³/h Negative pressure 3000 Pa Air velocity 40 m/s Noise level 80 dB Number of BIG-BAGs 2 pcs BIG-BAG capacity 1250 L each / 2500 L total Dimensions (L × W × H) 3250 × 1100 × 3700 mm Weight 820 kg

Condition: used, Mobile table with dust extraction Hedpozlxpljfx Akijw Used Price ex works Self-collection

Condition: new, Year of construction: 2026, The DCV6000E is a technologically advanced industrial dust extraction unit designed for the efficient removal of sawdust, chips and dust from multiple workstations simultaneously. Designed for uninterrupted, intensive operation in production facilities, it provides constant suction performance and excellent air quality in the workshop. The reinforced construction and dynamically balanced impeller guarantee quiet, maintenance-free operation. Main Advantages of the Machine Very high performance – 6000 m³/h, ideal for operating with multiple machines simultaneously. 250 mm suction inlet diameter ensuring high airflow and compatibility with central extraction systems. 28 polyester filters with a filtration accuracy of 5 microns and a total filtration area of 14 m². Construction adapted for ceiling-mounted installation – space saving and the possibility of expanding the system. Hermetic bag replacement system – cleanliness and convenient operation. Energy-efficient operation thanks to optimized fan blades and high tightness of the suction system. Construction and Technology The extractor body is made of thick hardened steel, resistant to deformation and vibrations. The heart of the system is a metal impeller, dynamically balanced to reduce noise and ensure stability when operating with high airflow. Polyester filters with a large surface area and precise permeability retain dust particles with a size of up to 5 microns. The possibility of expanding the system with a HEPA filter means that the system meets the highest air quality standards. Precision and Work Efficiency The DCV6000E achieves a suction velocity of 28–32 m/s with a 3.8 kW motor operating at 3000 rpm. This allows it to efficiently handle multi-station woodworking lines and automated production systems, regardless of the intensity of the load. The unit guarantees stable parameters even during continuous operation. Hodpfxsvzqxhj Akijw Application The DCV6000E woodworking dust extractor is used in furniture manufacturing plants, industrial woodworking shops, CNC production lines and wherever significant amounts of wood dust are generated. It works with: panel saws and sizing saws, wide-belt sanders, edgebanders and planers, CNC machines for wood. Standard Equipment 28 dust filters (polyester, 5 microns) galvanized steel body metal impeller and suction housing hermetic bag containers Technical Specifications S1 motor power — 3.8 kW / 400 V, 50 Hz Motor speed — 3000 rpm Extraction capacity — 6000 m³/h Negative pressure — 3000 Pa Noise level — 80 dB Suction inlet diameter — 250 mm Suction velocity — 28–32 m/s Filter surface area — 14 m² Number of filters — 28 Filter material — Polyester, 5 microns / filter category "G" Dimensions (L × W × H) — 2000 × 625 × 2150 mm Weight — 262 kg The DCV6000E is a proven solution for the woodworking industry that combines reliability, energy efficiency and high filtration quality. Invest in a clean working environment and the safety of your production – contact our sales department to learn more about the available configuration options for the extraction system.

Condition: new, Year of construction: 2026, DCV4500 VIBER – Modern Industrial Dust Extraction System with Automatic Filter Cleaning The DCV4500 VIBER is a modern industrial dust extraction system designed for continuous, efficient, and quiet operation in demanding woodworking environments. The unit ensures stable extraction performance throughout the entire operating cycle, minimizing the risk of efficiency losses and production downtime. Main Advantages of the Machine VIBER system – automatic filter cleaning without interrupting operation. Full upper enclosure – significantly reduces noise and vibrations. Extraction capacity of 4500 m³/h – ensures effective dust removal even with several machines operating simultaneously. Highly sealed system design – prevents heat losses and guarantees clean air in the production hall. New safety protection system – improves operational reliability. Metal rotor – dynamically balanced for quiet and vibration-free operation. Design and Technology The machine is based on a reinforced, hardened steel construction. Its compact dimensions allow the extractor to be installed close to a wall or between machines without limiting the available working space. Metal waste containers equipped with viewing windows and a mobile system enable quick emptying and easy monitoring of filling levels. Service doors provide convenient maintenance access and simplify the replacement of filter bags. Precision and Work Efficiency The dust extraction fan used in the DCV4500 VIBER provides an air suction speed of 28–32 m/s. Thanks to the specially designed rotor blade geometry, maximum efficiency is achieved with minimal energy consumption. At the same time, filtration down to 5 microns effectively captures fine dust particles, improving workplace air quality and enhancing the final quality of processed materials. Hedpfx Asuc Unqokisw Applications The DCV4500 VIBER is an advanced central dust extraction system ideal for: woodworking plants, furniture manufacturers, producers of wooden components. It efficiently supports machines such as sanding machines, panel saws, edge banders, and other equipment generating large amounts of dust and chips. Its reliable operation makes it suitable for both serial production and intensive industrial use. Standard Equipment Control cabinet with ON/OFF function 18 polyester filters with filtration efficiency down to 5 microns Metal waste containers with viewing windows Full sound-insulated enclosure Technical Specifications Parameter Value Motor power (S1) 3.0 kW Power supply 400 V / 50 Hz Motor speed 3000 rpm Extraction capacity 4500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Air velocity 28–32 m/s Filtration area 6 m² Number of filters 18 Filter material Polyester, 5 microns / filter category "G" Dimensions 752 × 1502 × 2200 mm Weight 220 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). Hjdsx Agpzopfx Akiew The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: excellent (used), For sale: BOFA ES400i industrial fume extractor, manufactured by BOFA International for Markem-Imaje. This unit is designed for extracting and filtering contaminants generated during the operation of marking devices, including lasers. The metal housing is equipped with wheels, a control panel, and connection ports for the extraction system. The interior and visual condition of the unit are shown in the photos. Data from the nameplate: - Model: ES400i - Part number: Power supply: 230 V, 50/60 Hz, 6.20 A - Date of manufacture: Serial number: 03/09/ES400i-1111 Hsdoz Spduopfx Akiow

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Dust extraction unit, EX version. Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Negative pressure: 2400 Pa Hedpohm E S Ajfx Akiow The unit is in very good condition.

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Hedpfxszxtz No Akijw Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: good (used), Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan Hjdpfjz Syydsx Akiow -Manufacturer: Novenco, dust extraction blower radial fan type CNA-500 DE X -Motor: Loher 4 kW 1415 rpm -Volume flow rate: 8000 m³/h -Connection: Inlet Ø 490 mm -Connection: Output 500 x 350 mm -Fan wheel: Ø 560 x 140 mm -Dimensions: 1000/770/H855 mm -Weight: 107 kg

Condition: used, Dust extraction fan Power: 30 kW Source: DISA Danmark A/S Hodoz Aqfgepfx Akijw Model: S 0.63-400 D2 RD0 Gads: 2001

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Hjdpfx Ajy Sz Dnskijw Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. Hodpowcdrvjfx Akisw ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: good (used), Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan Hsdpfx Akoz Ru Uyeijw -Dust extraction fan: radial fan -Motor: Loher ENGV-132SB-04M 5.0 kW 1440 rpm Ex protected -Volume flow rate: m³/h -Connection: Inlet Ø 500 mm -Connection: Outlet Ø 500 mm -Fan wheel: Ø 510 x 220 mm -Dimensions: 1000/750/H1630 mm -Weight: 156 kg

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Hsdon Nw Ntjpfx Akiow Inverter Lime dispenser Noise suppressor

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan Hsdot Hy Ufopfx Akiow -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm -Weight: 171 kg/pc.

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Hjdpexf Up Ijfx Akijw

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. Hodswcd I Ropfx Akijw The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Year of construction: 2001, condition: used, functionality: fully functional, Used wet and dry vacuum cleaner (dust extraction system) in good condition. Hjdpfozb Ipusx Akisw Extraction capacity: 1,800 m³/h.

Condition: used, ESTA Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. This system is ideally suited for workshops to extract chips and dust (e.g., during metal or wood processing). Hedpfoznibwex Akiow Technical data of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amps): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2018, Only a few running hours. The table must be connected to a external dust extractor. Hjdpfx Akow T Sicoiew We ship all over EU.

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 252 m², suction capacity: 16,000 m³/h, Extraction unit, dust collector, work station Donaldson Torit ECB-2. The ECB work station is ideal for finishing work on large components with irregular shapes. This efficient, flexible, and cost-effective self-contained workstation is engineered to remove fine airborne dust without restricting operator movement or visibility. Thanks to Donaldson’s patented filter media, no other standalone workstation offers a more effective or efficient dust filtration system. The Donaldson ECB is a budget-friendly choice for autonomous workstations. There is no need for duct installation, which reduces installation costs. The ECB further saves costs by recirculating cleaned air, helping to reduce energy expenses. Operators can be more productive when working in a cleaner and safer environment. Designed as a standalone unit, the Donaldson ECB booth is the ideal solution for work environments that require maximum flexibility. It can boost productivity by adapting to the requirements of almost any task, and is easy to relocate, allowing for adjustment to changes in plant layout. Hedpox Hf Rnjfx Akiow Brand: Donaldson Torit Model: ECB-2 Year of manufacture: 2008 Specifications: EX fans – 2 x 4 kW Capacity – 2 x 8,000 m³/h (16,000 m³/h total) Option to operate with a single fan Filtration area – 252 m² Donaldson Ultra WEB filter cartridges – 12 pcs Inventory number: 1041