Used Grease Separator for sale (7,323)

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste Tedpfx Aksu Dg Uheiod non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: used, functionality: fully functional, Waters Alliance HT 2795/2790 Separations Modules. This Waters 2795 HPLC integrates a solvent management system and a sample management system to provide accurate analysis for HPLC, LC/MS or flow injection mass spectrometry applications. It is built for a variety of applications and are routinely used in analytical environments such as food safety, forensics, research and development, quality control, and chemical and pharmaceutical laboratories. Number of solvents: one to four Gradient profiles: 11 gradient curves Solvent conditioning: vacuum degas Maximum operating pressure: 5000 psi Compressibility compensation: automatic and continuous Tedet Uwc Aepfx Akisd Sample plates: total of four plates Power requirements: 950 VA (Maximum) 2 for sale. 1 piece/2000 EUR. Good working condition. Please check out our other listings as well.

Condition: used, Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Todpfx Akopuduxsisd Usable space: 700 mm Filling volume: 280 l / 280 l degreasing system Temperature °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total power consumption: 84 A 400 V degreasing system Dimensions: approx. 210x200x260 cm Year of manufacture: 2014 Special equipment: Fine filter Drainage pump More items – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, MRS Cleaner – cleaning and degreasing concentrate MRS Cleaner is a professional alkaline concentrate for cleaning and degreasing parts, machines, equipment, vehicles and metal surfaces. Its low-foaming formula makes the product ideally suited for use in industrial, pressure and automatic washers, as well as equipment with heated cleaning solution. The product is designed for effective removal of grease, oils and other contaminants generated during the operation of machines, vehicles and equipment. MRS Cleaner contains corrosion inhibitors and is recommended, among other applications, for cleaning engines, components and metal parts. Alkaline concentrate for professional cleaning and degreasing MRS Cleaner has been developed for applications requiring effective and efficient industrial cleaning. The alkaline formula facilitates the removal of stubborn dirt, while its low-foaming properties allow convenient use in equipment designed for cleaning parts and components. The product can be used, among other applications, for: degreasing parts and metal components, cleaning engines and components, cleaning industrial machinery, cleaning agricultural equipment and machinery, cleaning road machinery, cleaning passenger cars and lorries, cleaning forklift trucks, cleaning tractors, cleaning conveyor belts, cleaning containers, cleaning tarpaulins, removing dirt from metal surfaces. Which washers can MRS Cleaner be used in? The concentrate is intended for use, among other applications, in washers with a closed-loop working solution system. It can be used in: automatic washers, pressure washers, washers with heated working solution, equipment for industrial parts cleaning. The best cleaning results are achieved using an aqueous cleaning solution at a temperature of 40–80°C. Recommended concentration The working solution concentration should be adjusted to the type and degree of contamination, the sensitivity of the surface being cleaned and the selected cleaning method. Tjdpfxozvaygs Akied Cleaning method Recommended concentration Immersion cleaning 5–10% Low-pressure cleaning 2–10% High-pressure cleaning 2–5% Concentrate pH value: 12.8 Recommended working solution temperature: 40–80°C 10% concentration – how much ready-to-use solution can you prepare? When preparing a 10% MRS Cleaner cleaning solution, 1L of concentrate can produce up to 10L of ready-to-use working solution. The high concentration of the product allows a large quantity of working solution to be prepared, making MRS Cleaner an economical solution for regular cleaning and degreasing of parts, machines and equipment. Key advantages of MRS Cleaner alkaline concentrate for cleaning and degreasing, low-foaming formula suitable for professional washers, contains corrosion inhibitors, concentrate pH value: 12.8, designed for cleaning parts and metal surfaces, recommended for cleaning engines and components, suitable for automatic and pressure washers, suitable for use in equipment with heated working solution, recommended operating temperature 40–80°C, wide range of applications in industry, automotive, agriculture and transport, at a 10% concentration, 1L of concentrate can be used to prepare up to 10L of ready-to-use working solution.

Year of construction: 2020, condition: used, machine/vehicle number: E22SJ20072839180, The iCombiPro is the latest combination oven from RATIONAL. The iCombiPro 20-2/1 electric model, with 20 GN 2/1 or 40 GN 1/1 trays, is also easy to operate for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The super-fast intermediate and self-cleaning cycles keep your appliance sparkling clean. The combination oven has been completely refurbished in our in-house workshop and is therefore fully functional and free of defects. A 6-month warranty is provided on all electrical components. The iCombi Pro has only operated for 5834 operating cycles/hours! Manufacturer's recommended retail price: €37,640 net = €44,792 gross Offer price: €16,500 net = €19,635 gross Our service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional and competent advice – before and after purchase Flexible shipping or self-collection options Provision of operating instructions, connection diagrams & spare parts Complete range of accessories at attractive prices Condition: used, inspected, fully functional Tsdpezwu U Iefx Akiod Technical data: W x D x H: 1082 x 1117 x 1872 mm Minimum door opening dimensions for transport W x H: 1200x1900mm Serial number: E22SJ20072839180 Year of manufacture: 07/2020 Max. loading quantity / tray: 5 kg Max. total loading quantity: 100 kg Weight of electric appliance: 325 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection value: 67.9 kW Steam operation power: 54 kW Hot air power: 66 kW Fuse rating: 100 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Other information: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Detects the size, loading quantity and product condition and calculates the browning accordingly Learns which cooking habits are often used and implements them Determines the ideal cooking path for the desired result MyDisplay - user-adjustable, user-specific display TFT color display and touchscreen Application and operating manual can be accessed on the device display Core temperature sensor with automatic error correction in case of punctures and positioning aid Door compartment with glazed, energy-saving glass LED interior lighting Including energy consumption display Humidity control: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Humidification adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: rapid cooling of the cooking chamber Automatic adjustment to the installation location (altitude, climate etc.) Appliance door with ventilated triple-glazed pane and pivoting inner pane Fixed wastewater connection according to SVGW permissible Splash and spray water protection IP X 5 Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection with date and time adjustable Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to changes and errors.

Condition: good (used), mileage: 821,749 km, power: 294 kW (399.73 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6, total length: 9,630 mm, total width: 2,550 mm, total height: 3,300 mm, Equipment: ABS, air conditioning, Front axle: Steered Number of cylinders: 5 Engine displacement: 12,419 cc Unladen weight: 17,820 kg Payload: 8,140 kg GVW: 26,000 kg Technical condition: good Optical condition: good MAN TGS 26.400 6x4 – SIMON MOOS KSA SEWER CLEANER / SLUDGE SUCTION TRUCK For sale is a MAN TGS 26.400 6x4 with a professional Simon Moos KSA sewer cleaning and sludge dewatering system. An extremely specialized vehicle for professional use in sewer cleaning, sludge removal, septic tank cleaning, wastewater technology, and industrial cleaning operations. VEHICLE / CHASSIS * Manufacturer: MAN * Type: TGS 26.400 * Drive: 6x4 * Engine power: 400 hp * Fuel: Diesel * Cab: SAG / Day cab * Transmission: Manual transmission * First registration: 27.10.2015 * Robust MAN 6x4 chassis * Auxiliary drive / PTO for operating the body hydraulics * Specifically designed as a professional sewer cleaning vehicle SIMON MOOS KSA BODY * Manufacturer: Simon Moos * Type: KSA * Serial number: 111680/2015 * Professional sewer cleaning and sludge treatment system * Designed for intensive commercial use * Suitable for suction, treatment, and dewatering of sludge * Professional hydraulic system * User-friendly design SPECIAL EQUIPMENT The Simon Moos KSA system is equipped with, among other things: * Swiveling hose reel at the rear * Hose reel easily accessible from the rear of the vehicle * Body can be lowered during driving / operation * Body hydraulically lowerable * Body lockable in working position * Professional hydraulic operation * Designed for efficient work directly at the job site KSA SYSTEM / SLUDGE DEWATERING A significant advantage of the Simon Moos system is the ability to treat and dewater the collected sludge directly on-site. This separates the liquid and solid components. As a result, it is not necessary to transport a large amount of water unnecessarily, and the effective capacity of the vehicle can be used much more efficiently. This is a significant economic advantage, especially for longer operations and large volumes of sludge. AREAS OF APPLICATION This special vehicle is ideally suited for: * Sewer and pipe cleaning * Sludge removal * Septic tanks and wastewater treatment plants * Wastewater systems * Grease and sludge separators * Municipal cleaning operations * Industrial cleaning operations * Environmental and disposal technology * Service companies in the sewer and wastewater sector Tsdpfx Akezxgkwsied ADVANTAGES OF THIS VEHICLE The combination of the MAN TGS 26.400 6x4 chassis and the professional Simon Moos KSA system results in a very versatile special vehicle. The 6x4 drive offers good traction and stability, even in heavy-duty operations and on difficult terrain. The ability to treat or dewater sludge on-site can reduce the number of necessary emptying and transport trips. The swiveling hose reel at the rear and the lowerable and lockable...

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Electrical data: Tsdpfxsyn Rkuo Akisd 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min

Condition: used, Year of construction: 2000, type of input current: three-phase, We offer this used Junker Jucam 5002/20 S camshaft grinding machine, year of manufacture 2000. Year of manufacture: 2000 Power rating: 60 kVA Rated voltage: 400 V Frequency: 50 Hz Control voltage: DC 24 V Fusing: 3×100 A Voltage before main switch (circuit F 001): 230 V Voltage before main switch (circuit F 002): 400 V Production information JUNKER GROUP Operating manual included 4. Technical Data 4.1 Electrical connection values Power supply: 400 V / 50 Hz Power: 60 kVA Fusing: 3 x 100 A Conductor cross-section: 5 x 35 mm² Cu 4.2 Mechanical Data Workpiece Workpiece diameter: approx. 100 mm Max. workpiece swing diameter: 150 mm Clamping length: max. 900 mm Z-axis traverse path: max. 1000 mm Max. workpiece swing diameter in steady rest area: 150 mm Loading system Manual, with loading and unloading device Workpiece spindle head Stationary Max. speed: 250 rpm Workpiece drive: frictional connection Workpiece spindle Dimensions: 210 x 700 mm Flange diameter: 180 mm Standard collar diameter: 127 mm Lubrication: oil lubrication Tailstock spindle Longitudinal adjustment manual via sprocket Fixed centre, special version MK 3–centre Clamping pressure adjustable via hydraulics Grinding table Z-axis feed (CNC-controlled) Grinding spindle headstock X-axis infeed (CNC-controlled) Horizontal swiveling B-axis (CNC-controlled) Grinding spindle II Dimensions: 205 x 450 mm Flange diameter: 190 mm Standard collar diameter: 127 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 30 kW Speed control with frequency converter Max. speed: 4,400 rpm Balancing: electronic Grinding wheel (Grinding spindle II) Type: Borazon (CBN), ceramic bond Diameter: Ø 400 mm Bore: Ø 127 mm Grinding wheel width: 18 mm and 16 mm Max. peripheral speed: 125 m/s Steady rest Type GR – 110 – NR Diameter range: Ø 30.1 – Ø 40 mm Wheel dressing Fine dressing (circumference and flank) with diamond dressing wheel mounted on dressing spindle: Ø 110 mm Dressing spindle Dimensions: 80 x 250 mm Flange diameter: 100 mm Todpfx Aey Dv Sdekijd Standard collar diameter: 75 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 1.8 kW Speed control with frequency converter Max. speed: 24,000 rpm Balancing: electronic If you have any questions or require further information, feel free to send us a message or give us a call.

Year of construction: 2026, condition: new, functionality: fully functional, New electromagnetic overband (crossbelt) separator for removing tramp iron from conveyor belts in recycling, mining, coal, aggregates and cement plants. Crossbelt installation, up to 30° belt angle. - Three-pole electromagnet, oil-cooled by natural heat transfer Tsdpezmntpefx Akisd - Magnetic output: 5.2 kW · magnetic intensity: 800 Gauss at 350 mm - For 1000 mm conveyor belts · suspension height 350 mm - EP600-4, 10 mm rubber separator belt · 2.2 kW SEW geared motor - Fully magnetically isolated steel body · control panel and rectifier included - 5-year guarantee on magnetic field intensity - Weight approx. 2,420 kg Also available: EMBS-C-1200, C-1400, C-1600 and EMBS-I inline models. Made in Türkiye. Delivery FCA Ankara.

Year of construction: 2026, condition: new, functionality: fully functional, New eddy current non-ferrous metal separator. Recovers aluminium, copper and other non-ferrous metals from municipal waste, PET flakes and shredded scrap. Todpfx Ajzmntvekijd - 12-pole neodymium eccentric rotor, D500 x 1280 mm - 2,950 Gauss on the drum surface · 2,215 Gauss over the belt - 1000 mm effective belt width · 5.5 kW ABB rotor motor - Vibratory feeder and adjustable splitter included - Control panel 3-phase 380 V, 50 Hz - Approx. 5,000 x 2,180 x 2,645 mm, approx. 2,275 kg Made in Türkiye. Delivery FCA Ankara.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: KR210 R2700 extra KRC4, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® – Refurbished industrial robot. Established in 2002. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR210 R2700 Controller: KRC4 Rated Payload: 210 kg Reach: 2696 mm General purpose: Applying/Painting/Gluing, Assembly, Cutting/Separation, Handling, Laser Welding, Machining, Measuring/Inspection, Palletizing/Packaging Versatile, streamlined, powerful, and robust – these are the typical characteristics of the KR QUANTEC series, the best-selling robot series from KUKA. Delivery time: To be agreed upon mutually. IRS Robotics® refurbished: Tedszhil Aopfx Akied 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About: Our daily business is based on providing reliable, refurbished A-brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. We ship worldwide.

Operating hours: 240 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: MSB14, Machine fully disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, the bevel gear set, among other components, was replaced with new and original parts, and the frame was oven-painted. Hydraulic capacity: Up to 8,000/9,000 l/h Effective capacity: between 500/1,000 l/h, as measured during testing with your processed product; capacity may vary considerably depending on the percentage of solid residues present in the product to be treated. Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Drum volume: 6.9 l – sludge chamber: 3.9 l - Drum speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly Tedpfoxvrfnox Akiod - New electric panel with 11 kW inverter-controlled power section and PLC-operated discharge control section, inside stainless steel housing The inverter enables smoother operation and significantly reduces power consumption and maintenance\. - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, to ensure consistent flushing - Flow indicator - The machine is mounted on a heavy-duty base with four M20 anti-vibration mounts in square profile steel.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, rotational speed (max.): 3,520 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Used, very good condition Westfalia SA7-01-576 Separator, year of construction 1977. Packed in wooden crate to IPPC standard, ready to be shipped. - Brand new Time control box with Burkert valves and automatic controls - Performance 500 - 3.000 Ltr - self-cleaning - Motor 4 kw, 380V / 50 Hz - Start-switch including phase changer and emergency stop function - with Tools, Instruction Manual and Spare part list - Made in Germany Todezryq Repfx Akied If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, ACCESS NOW – IT PAYS OFF, SPECIAL PRICE REQUEST AVAILABILITY!!! NEW, ORIGINAL PACKAGING + 1 YEAR MANUFACTURER'S WARRANTY + 2 YEARS WHEN INSTALLED BY A RATIONAL SERVICE PARTNER The iCombi Pro is the latest combination oven from RATIONAL. The iCombi Pro 10-1/1 electric model with 10 GN 1/1 trays is easy to operate, even for untrained personnel, as it achieves outstanding food quality without requiring constant supervision. The super-fast intermediate and self-cleaning cycles keep your appliance sparkling clean. You will receive an invoice with VAT shown. OUR DEVICE SERVICE FOR YOU: Up to 2 years manufacturer's warranty High-quality branded devices at fair prices Professional and competent advice – before and after purchase Free shipping within Germany (excluding islands/mountain stations) Provision of operating instructions, connection diagrams & spare parts Trade-in of your combination oven from the year 2011 onwards Complete range of accessories at attractive prices Condition: New, fully functional TECHNICAL DATA: W x D x H: 850 x 842 x 1014 mm Power connection: V: 400 / Hz: 50-60 / kW: 18.9 Weight: 127 kg SPECIAL FEATURES: Energy-efficient: 60% less energy consumption thanks to state-of-the-art thermal insulation Self-cleaning: the device cleans itself automatically using an installed program Operation possible without an additional water softener and without additional descaling FURTHER INFORMATION: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Recognizes the size, quantity and condition of the food and calculates the browning accordingly Learns which cooking habits are frequently used and implements them Determines the ideal cooking path to achieve the desired result MyDisplay - self-adjustable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the device display Core temperature sensor with automatic error correction in case of sensor failure and positioning aid Door compartment with glazed, energy-saving glass LED interior lighting Including energy consumption display Humidity control: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Tsdezyl Rropfx Akisd Steaming can be set in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: rapid cooking chamber cooling Automatic adjustment to the installation location (altitude, climate, etc.) Device door with ventilated triple-glazed pane and pivoting inner pane Wastewater connection permissible according to SVGW Splash and spray water protection IP X 5 Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection with adjustable date and time Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Do you have any questions, would like to request advice or would like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Tjdpfx Akozgq Szjisd Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: new, mileage: 1 km, power: 180 kW (244.73 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, total length: 5,700 mm, total width: 2,450 mm, total height: 2,200 mm, Equipment: air conditioning, crane, differential lock, electric window regulation, power assisted steering, - Autoradio - CD - Diesel - Power windows front - PTO - Side door - Tool box - Transportation Mercedes-Benz Atego 1725A 4x4 Mobile Workshop Truck | 245 HP | Euro 3 The Mercedes-Benz Atego 1725A 4x4 Mobile Workshop Truck is configured as a complete field-service solution for maintenance, lubrication, cleaning and repair operations in remote and demanding environments. Its 245 HP Mercedes-Benz Euro 3 engine, 4x4 drivetrain and fully equipped workshop body make it suitable for professional fleet support. Key Highlights - Mercedes-Benz Atego 1725A/42 4x4 - Mercedes-Benz 6.4L 6-cylinder Euro 3 engine - 245 HP (180 kW) - Mercedes-Benz G 85-6 manual transmission - Mercedes-Benz VG550-3W transfer case - Front and rear differential locks - Factory Mercedes-Benz PTO - Heavy-duty steel workshop body - 1,000-litre diesel service tank - 900-litre waste-oil tank - 600-litre water tank - Integrated lubrication equipment - ABAC 3 HP air compressor - Hyundai generator, 11.4 kVA / 9 kW - MMA & TIG welding equipment - High-pressure cleaning equipment - Workshop tools, cabinets and workbench Built for Field Maintenance The workshop body combines lubrication systems, fluid storage, compressed air, electrical power, cleaning equipment, welding facilities, tools and organised storage in one self-contained service vehicle. Four pneumatic oil pumps with hose reels, dispenser guns and digital meters support controlled lubricant delivery. Separate waste-oil and grease pumps further expand the vehicle’s service capabilities. The 4x4 drivetrain, front and rear differential locks and Mercedes-Benz transfer case provide additional mobility for reaching machinery and equipment beyond paved roads. Applications - Mining and quarry fleet maintenance - Construction equipment service - Infrastructure and road projects - Oil, gas and energy operations - Remote fleet maintenance - Industrial and heavy-equipment service Technical Specifications Vehicle: Mercedes-Benz Atego 1725A/42 Drive: 4x4 Engine: Mercedes-Benz 6.4L Euro 3 Power: 245 HP / 180 kW Transmission: G 85-6 manual Transfer case: VG550-3W Wheelbase: 4,160 mm Tjdpfxsy Ruczo Akied Weight variant: 17.1 tonnes Fuel tank: 210 litres Workshop body: Approx. 5,700 x 2,450 mm Internal height: 2,200 mm Cab: Mercedes-Benz S-Cab Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania commercial vehicles for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in service trucks, heavy-duty vehicles and specialised transport solutions, we provide complete vehicle solutions for customers across Africa, the Middle East and other export markets. Contact our team for availability, export options and worldwide delivery. General information Year of manufacture: 2025 Year of construction: 2025 Technical information Number of cylinders: 6 Engine capacity: 7.200 cc GVW: 17.000 kg Axle configuration Tyre size: 365/85 R 20 Brakes: drum brakes Suspension: leaf suspension Functional Crane: year of manufacture 2024...

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. New conveyor belt cleaner. Tedsvy A Urepfx Akiod

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: Tsdpoxbmpljfx Akiod * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: reconditioned (used), Manufacturer: Provisur / Beehive Tsdpfx Akoy Akhdeijd Model: RSDD-04 Type: Separator Dimensions: 2150 x 700 x 1650 mm Power: 21 kW Power supply: 400V 50Hz 3N Sieve hole diameter: 1 mm Material: Acid-resistant stainless steel Machine renovated and ready to work.

Year of construction: 2026, condition: new, functionality: fully functional, GRAB IT – IT PAYS OFF! SPECIAL PRICE + LIMITED QUANTITY iCOMBI PRO 6-1/1 E NEW GOODS, ORIGINAL PACKAGING + 1 YEAR MANUFACTURER’S WARRANTY + 2 YEARS WARRANTY WHEN INSTALLED BY A RATIONAL SERVICE PARTNER YOU WILL RECEIVE NEW, ORIGINAL PACKAGED GOODS! The iCombi Pro is the latest combination oven from RATIONAL. The iCombi Pro 10-1/1 electric model with 10 GN 1/1 compartments is also easy to operate for untrained personnel, as you can achieve outstanding food quality without any monitoring effort. The super-fast intermediate and self-cleaning functions keep your device sparkling clean. You will receive an invoice with VAT shown. The base frame shown in the picture is not included in the offer, but can be purchased as an option. Immediately available in stock!!! OUR DEVICE SERVICE FOR YOU: Up to 2 years manufacturer’s warranty High-quality branded devices at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional – or money back Flexible shipping or self-collection Competent advice – before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 The iCombi Pro from Rational sets a new standard in terms of intelligence, efficiency & flexibility. TECHNICAL DATA: W x D x H: 850 x 842 x 754 mm Power connection: V: 400 / Hz: 50-60 / kW: 10.8 Weight: 99 kg Year of manufacture: 2026 Condition: New, original packaging, fully functional FURTHER INFORMATION: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Recognizes the size, quantity and product condition and calculates the browning accordingly Learns which cooking habits are used frequently and implements them Determines the ideal cooking path to the desired result MyDisplay - self-adjustable, user-specific operating display TFT color display and touchscreen Application and operating manual can be called up on the device display Core temperature sensor with automatic error correction for incorrect measurements and positioning aid Door compartment with glass, energy-saving LED interior lighting Including energy consumption display Todpfsz Ha Tfex Akisd Humidity regulation: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Steaming adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separator system without additional grease filter Cool-down function: rapid cooking chamber cooling Automatic adjustment to the installation location (altitude, climate, etc.) Device door with ventilated triple-glazed pane and pivoting inner pane Connection to fixed wastewater line according to SVGW permitted Splash and spray water protection IP X 5 Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection with date and time adjustable Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have questions, would you like advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, Bous 3-chamber spray cleaning system (direct degreasing) System: 3 separate washing chambers (ideal for washing/rinsing/drying in a single cycle) Chamber size (W x H x D): 500 x 300 x 1,000 mm (perfect for long, curved workpieces) Equipment: Integrated thermostat for precise bath temperature control Control: Siemens PLC with Siemens SIMATIC operator panel Machine has already been professionally disassembled and is ready for loading onto a pallet. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! Todpfx Akjzz H Iujijd International shipping costs available upon request!

Condition: new, maximum load weight: 92,045 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle Todpfxjzzhfns Akisd * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included Todpfx Aez Itlwekisd The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: used, Bous Waschfix Industrial Cleaning and Degreasing System This system is ideally suited for workshops, production facilities, mechanical engineering companies, or automotive repair shops for the automatic and thorough cleaning and degreasing of workpieces, machine parts, and tools. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based detergents (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, operation is absolutely safe and straightforward. • Integrated fine filter for a longer service life of the cleaning water and cleaner cleaning results. • Integrated drain pump for effortless emptying of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: WASCHFIX Year of manufacture: 2006 Tank capacity: 100 liters Operating temperature: up to +70 °C Electrical heating power: 6 kW Compressed air connection: 6 bar (for blow-out function) Electrical connection: 230 / 400 V Total power consumption: 17 A Control voltage: 24 V DC / 50 Hz Net system weight: approx. 500 kg "Everything from a single source: We will gladly offer you suitable bank financing for your project." Todjz Nwbmjpfx Akied You can find more new and used items in our shop! International shipping costs upon request!

Year of construction: 2018, condition: used, functionality: fully functional, This is an SCC 61 WE combination steamer in an electric version, from the premium manufacturer Rational, manufactured in 2018. The combination steamer is a unit from the latest SCC series, featuring triple-glazed glass and LED lighting. The unit has undergone a thorough inspection in our in-house workshop and the combination steamer is fully functional. The base frame shown in the picture is not included in the offer, but can be purchased as an optional extra. These are example images. Original images will follow shortly. The unit is available from approximately week 46. The recommended retail price is €9,400 net. You will receive an invoice with VAT shown. Tedpfx Ao Agt Dxskiod Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • tested & fully functional - or money back • Flexible choice of shipping or self-collection • Competent advice - before and after the purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: approx. 847 x 776 x 782 mm • Minimum door opening dimensions for transport W x H: 845x850mm • Power connection: V: 400 / kW: 11 / Hz: 50/60 • Capacity: 6x 1/1GN • Weight: approx. 110 kg • Serial number: E61SI18012643040 • Year of manufacture: 2018 Condition: used, inspected, fully functional Additional information: • In combination steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Care Control - self-cleaning • Core temperature probe • Handheld spray with automatic retraction • 8.5 inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time preselection • 7 cleaning levels for unattended cleaning - also overnight • Moistening adjustable in 3 stages - from 30°C to 260 °C • 5 programmable proofing levels • USB interface • Seamless, tub-shaped hygiene cooking chamber, rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).