Used Gratings for sale (359)

Condition: new, Year of construction: 2025, NEW Mobile loading and unloading ramp with a load capacity of 10T. Technical parameters: 1.) Load capacity 10T 2.) Internal width 2.0m - external width 2,1m 3.) Length 11.3m 4.) Total weight 2.9T 5.) Height adjustment 1.1-1.8 m 5.) Fork holder for the ramp transport truck 6.) Transport wheels 7.) Plumbing The ramp floor is made of BRIDGING GRILLE, which is GALVANIZED!!!. the grating is a great advantage of this ramp, unlike ramps that have a floor made of sheet metal and steel mesh or bars placed on it. the wheels of the forklift do not slip on the ramp, and they clean themselves during the drive, which means that the floor of the loaded container or truck is not contaminated with mud or snow. PayPal payment available!!! ​ Ltodperqfq Eefx Aa Eja

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition Ledpfx Aaju R Dhxs Esta *

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Ltsdoxwn R Nepfx Aa Esa Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Condition: used, mileage: 539,845 km, power: 294 kW (399.73 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, first registration: 06/2014, next inspection (TÜV): 02/2025, loading space length: 9,400 mm, loading space width: 2,550 mm, color: silver, Year of construction: 2014, total width: 2,550 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, 4-axle machine transporter for aerial platforms, construction equipment MAN 35.400 / 8x2 * MAN * Model 35.400 / 8x2 * Body by Zanner * Year of manufacture 2014 * Mileage 539,845 km according to odometer * Driven by 6-cylinder diesel engine with 295 kW / 360 HP * Displacement 10,518 cm³ * Automatic transmission, differential lock, retarder * Wheelbase 1-2: 1850 mm / 2-3: 4150 mm / 3-4: 1350 mm, axle configuration 8x2 * Tire size 385/55R22.5, tread depth from 4 mm to 12 mm * Overall dimensions (L x W x H): 12,250 x 2,550 x 3,350 mm * Gross weight 32,000 kg, unladen weight 17,780 kg, payload 14,740 kg * Body dimensions (L x W x H): 9,450 x 2,550 x 3,400 mm, loading height 1,200 mm * Ball-head trailer coupling, PTO, beacon light, 2 seats * Hydraulic supports * Hydraulically split, sliding ramps 4,200 x 820 mm * Grating floor, winch with remote control This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all information. Ltjdpfx Aexpl Ehja Eoa Please also visit our homepage.

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Ltsdpfjxwhw Aox Aa Esa Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: used, mileage: 19,537 km, power: 129 kW (175.39 HP), gearing type: mechanical, overall weight: 7,490 kg, first registration: 12/2021, next inspection (TÜV): 05/2026, loading space length: 6,400 mm, loading space width: 2,400 mm, emission class: euro6, color: white, number of seats: 3, total length: 8,350 mm, total width: 2,450 mm, total height: 3,060 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Fuso Canter 7C18 Construction Equipment / Aerial Work Platform Transporter * Body with rear slope and aluminum loading ramps * Grating floor * Aluminum front wall Ltjdpfxew A T Umj Aa Eja * Rear supports * Electric windows * Automatic climate control * Radio * Central locking * Disc brakes * Tow bar * Spare wheel carrier with spare wheel * Wheelbase: 4,300 mm * Tires: 205/75 R 17.5 * Unladen weight: 3,790 kg For further information, we are at your disposal.

Year of construction: 2018, condition: ready for operation (used), Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible. Lodpfx Aoxtprtsa Ejta

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF Ltjdsxfvahspfx Aa Esa 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: used, Spill containment sump, storage pallet for hazardous substances Type 4P-TCF Wash table with grating Manufacturer number: 80027720 Year of manufacture: 1997 Containment volume: 1000 liters Load capacity: 2000 kg with even load distribution - Sump made of steel sheet (1.0038) Ltodpfxsxf Uv Ie Aa Eja - Official approval mark: LUA NRW-19h-95/14.0.0 - 3-piece hot-dip galvanized grating - Forklift pockets: 295 x 95 mm Overall dimensions (L x W x H): 1360 x 1250 x 925 mm Net weight approx. 180 kg Good condition

Year of construction: 2025, condition: used, machine/vehicle number: 0799-250030, Stairs made of galvanized gratings: Ltjdpfxsxbqdgs Aa Eja All steps with width 1020 mm, and step height 180 mm, 3 pieces with 4 steps 20 pieces with 3 steps without support 6 pieces with 3 steps with support all stairs are galvanized and in good condition

Year of construction: 2007, condition: used, working area L-W-H 900 x 700 x 750 mm compressed air 5.0 - 8.0 bar Air consumption ca. 800 l/min. Loading max. 50 kg voltage 400 V total power requirement 1.32 kW weight of the machine ca. 700 kg range L-W-H 1200 x 1200 x 2100 mm Current new price approx. 23.000 Euro (!!) Special price upon request Equipment: - Industrial sandblasting system - Work area: 900 x 700 x 750 - Perforated sheet = work grate with stable support - 2 side openings with locking doors - Continuous blasting pressure adjustment - Pressure gauge - Pressure indicator - Front viewing window - 1 free-moving foot switch Lodpfx Aasxaaqms Eota - Blasting gun + blasting gloves * 1 extra pair included - Operating instructions (PDF) * Includes special accessories: - 1 WIWOX filter and recovery system * Can be installed separately next to or behind the booth * Can be moved on casters with a parking brake (see Figure 9 - system lying down for transport purposes)

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Ltjdpfoxqkayox Aa Eea Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: new, empty load weight: 2,780 kg, maximum load weight: 7,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, wooden planks 50 mm, loading area rear sloping, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ltodjxghutopfx Aa Eea

Condition: used, Year of construction: 2013, functionality: fully functional, total length: 20,000 mm, We are selling used linear carwash from well known manufacturer CHRIST, year of production 2013. Carwash is complete, without chains and dry wiping. Approximate length of carwash is 20 metrov. Including: • Advertising and foam spraying portal Ljdpfx Aasxy E Azj Esta • Double-sided brushes for washing side skirts and rims • High pressure washing portal • Portal for washing with textile brushes • Driers • Waxing platform • Detergent dispenser • Floor gratings Suitable for companies that want to increase vehicle washing capacity or install a new washing line with reliable equipment.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MantaMesh, High quality grate carriers with high load capacity, economical alternative to grates - New Prices on request! Request a quote with specifications, volume discount and delivery time. Also lowest price guarantee! Send us the quote with the same products and we will beat it with our price and service! Manufacturer: Delta Shelving Type: MantaMesh Standard width: 885mm (so a 2.70m truss will require 3 supports = 2,655mm). 1335mm Depth of frame: 1,05m 1,10 1,20m Other depths on request! Lsdpfx Aasuq Nt Ss Esta Evenly distributed load: between 250 and 1,500 kg Standard (price applies to standard version): 1,000kg, so also per pallet Grid: 50 x 100 or 25x100mm Please also mention in your request which type of beam (truss type) you have! So whether box section (or IPE beam) 50 or 40mm, or whether you have trusses with step. Advantages: no sharp edges 200% safety factor - independent of beam type Can be tested for allowable deflection and structural failure Wide range of standard sizes and load capacities MantaMESH is our market leader in mesh racks. MantaMESH provides security with over 70% open area and a 200% safety factor that exceeds the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR Sprinklers. Compatible with ANSI MH 26.2 - 2007 Manufactured in Germany Pre-welded seamed support channels Pre-galvanized finish Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of support beams: 1100 mm deep: 2000 kg The meshes have more than 70% open space Sample configuration - we are happy to create a configuration for your application!!! Depth 1102mm Width 881mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of support beams Front side: Fold 30mm outwards Rear: Fold down 30mm to the outside Item weight 9.43kg

Year of construction: 2017, condition: excellent (used), Size: 1290x900x40mm (45x20mm) used, galvanized (42 pieces) Size: 1290x1145x40mm (45x20mm) used, galvanized (44 pieces) Grating cover 1290x900x40mm (45x20mm) 69 EUR/piece net Grating cover 1290x1145x40mm (45x20mm) 90 EUR/piece net If you require shelving or accessories in different configurations or designs, please contact us. We offer a comprehensive range of new and used racking and accessories, and are happy to assist you with your planning. Additional accessories such as: Frames, corner and impact protection, push-through protection, chipboard panels, grating, rear mesh panels, and depth supports available. Shipping: Please inquire about freight costs, specifying your postcode, location, and the required quantity of items. Additional services: Planning, racking assembly/disassembly, purchase/sale Specifications, details, and prices are subject to change without notice. Prior sale reserved! Ltsdeqfd Hgopfx Aa Eea

Condition: used, mileage: 19,537 km, power: 129 kW (175.39 HP), first registration: 12/2021, overall weight: 7,490 kg, next inspection (TÜV): 05/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 8,350 mm, total width: 2,450 mm, total height: 3,060 mm, loading space length: 6,400 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Fuso Canter 7C18 Construction Equipment / Aerial Work Platform Transporter * Body with rear slope and aluminum loading ramps * Grating floor * Aluminum front wall * Rear supports * Electric windows * Automatic climate control * Radio * Central locking * Disc brakes * Tow bar * Spare wheel carrier with spare wheel * Wheelbase: 4,300 mm * Tires: 205/75 R 17.5 Ledpfx Aaew A T U He Eota * Unladen weight: 3,790 kg For further information, we are at your disposal.

Condition: used, Frame: 9550 mm Crossbeams: 2700*100 mm, 2900*100 mm Load capacity: 2400 kg/level If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves as well as accessories and are happy to support you with your planning. Further accessories such as: Frame, corner, and impact protection, push-through protections, chipboard panels, grating, rear wall grids, depth bars available. Shipping: Please inquire about shipping costs by providing your postal code, location, and desired quantity of articles. Further services: Planning, shelving assembly/disassembly, purchase/sale Lodpov D Ix Defx Aa Eeta Subject to changes and errors in the technical data, information, and prices as well as prior sale!

Condition: used, mileage: 19,537 km, power: 129 kW (175.39 HP), first registration: 12/2021, overall weight: 7,490 kg, next inspection (TÜV): 05/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 8,350 mm, total width: 2,450 mm, total height: 3,060 mm, loading space length: 6,400 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Fuso Canter 7C18 Construction Equipment / Aerial Work Platform Transporter * Body with rear slope and aluminum loading ramps * Grating floor * Aluminum front wall Ltjdpfx Aew A T Uaea Eja * Rear supports * Electric windows * Automatic climate control * Radio * Central locking * Disc brakes * Tow bar * Spare wheel carrier with spare wheel * Wheelbase: 4,300 mm * Tires: 205/75 R 17.5 * Unladen weight: 3,790 kg For further information, we are at your disposal.

Condition: good (used), Crossbars: 1250*40*40 mm If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grating, rear wall grating, depth bars available. Shipping: Ltjdpsh Izuhjfx Aa Eja Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package Lsdpfxexp S Uvs Aa Eeta - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: like new (used), Ideal for traverses 2700 mm. If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Ltodpfx Ajpu Amwea Eoa Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Ltsdpfx Aaet T H Sks Eja Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: new, Storage platform accessories (stairs, transfer station, handrail sluice, folding door) new: handrail lock: H1800 L1500 mm, H1800 L2300 mm, H1800 L3000 mm Folding door: beite 1500 mm 2000 mm If you need shelves or accessories in other compositions or other combinations or designs, please contact us. We offer a comprehensive range of new and used shelving units and accessories and accessories and are happy to assist you with your planning. An individual offer tailored to your needs is a matter of course for us. Further accessories like for example: Collision protection corners, ram protection walls, push-through protection, chipboards, gratings, depth bars are available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity the freight charges. Further service offers: Shelf assembly, maintenance, expansion, conversion, as well as repair. Dismantling, PURCHASE, recycling, disposal. Ltsdpfofcrwyex Aa Esa

Condition: new, Available in all sizes, load capacity. I need the following information for the offer: -height, length, width -carrying capacity (kg/m2) -Floor: chipboard, grating -Stairs or other accessories? Accessories such as stairs, railings etc. can be supplied at extra cost. (prices on request) Do you need shelves or accessories in other Compositions or designs, please contact us. We offer a comprehensive range of new and used shelves as well as accessories and will gladly support you in your planning. An offer tailored to your individual needs is a matter of course for us. Other accessories such as: Collision protection corners, impact protection walls, push-through protection, chipboard, Gratings, depth bars available. Shipping: Please inquire by indicating your postcode and location, Ltodpfx Aasfcu D Is Eja as well as the desired item quantity. Further service offers: Shelf assembly, maintenance, extension, conversion and repair. Disassembly, PURCHASE, recycling, disposal.