Used Grating for sale (403)

Condition: new, empty load weight: 2,780 kg, maximum load weight: 10,220 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 10 lashing eyes per 2.5 t, 8 x lashing eyes per 6 t, wooden planks 50 mm, loading area slanted at the rear, rear stanchion removable, front for through-loading, , Also available in 6,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dksdpfoxn Ua Sex Ahujw

Condition: excellent (used), Year of construction: 2022, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 22001476, input voltage: 230 V, overall weight: 115 kg, total width: 684 mm, total length: 692 mm, total height: 1,441 mm, volume flow: 950 m³/h, filter area: 1.2 m², power: 0.51 kW (0.69 HP), input frequency: 60 Hz, Equipment: documentation/manual, type plate available, ESTA Table Box Active Mobile Odor Filter Airbox / Extraction Device / Extraction System - Mobile single workstation extraction unit with energy-efficient fan and activated carbon filter for capturing gaseous and fume pollutants Djdpfx Ahswbfkdouokw - The extraction system currently has only 9 operating hours - Extraction table with GRP grating (robust, corrosion-free, gentle on materials) - Additional hood made from corrosion-free aluminum sheet for improved capture of localized emissions on the grating The extraction system is intended for extracting gaseous environmental pollutants, such as smoke, for example. ATEX classification not available, not Ex-protected All technical specifications are subject to errors/typing mistakes. Price on request Sale exclusively to EU countries.

Condition: used, mileage: 19,537 km, power: 129 kW (175.39 HP), gearing type: mechanical, overall weight: 7,490 kg, first registration: 12/2021, next inspection (TÜV): 05/2026, loading space length: 6,400 mm, loading space width: 2,400 mm, emission class: euro6, color: white, number of seats: 3, total length: 8,350 mm, total width: 2,450 mm, total height: 3,060 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Fuso Canter 7C18 Construction Equipment / Aerial Work Platform Transporter * Body with rear slope and aluminum loading ramps Dodpjw A T Umofx Ahuekw * Grating floor * Aluminum front wall * Rear supports * Electric windows * Automatic climate control * Radio * Central locking * Disc brakes * Tow bar * Spare wheel carrier with spare wheel * Wheelbase: 4,300 mm * Tires: 205/75 R 17.5 * Unladen weight: 3,790 kg For further information, we are at your disposal.

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Djdpfx Aeg N Nlvjhuekw Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, Year of construction: 2021, machine/vehicle number: 22F16900, Canon IRAdv C3720 This is a Canon IRAdv C3720 photocopier in very good condition, offering excellent copy quality and a low page count. Meter reading: 22,000 copies (10,000 black & white, 12,000 color) Dkedpjxl Tfhofx Ahuew Options: PCL / PS / Send / Paper feed unit with 2 cassettes. Technical data: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is currently one of the leading French and European companies specializing in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics at every level of our business, we offer our clients high-performance products at competitive prices. Why do our clients choose CM Solutions? - 30 years of international experience in more than 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - A large stock of 2,000 copiers available immediately - A team of qualified technicians Feel free to contact us for more information.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Large Industrial Mezzanine / Intermediate Platform – approx. 1,900 m² – Wood & Hot-Dip Galvanized Gratings – Good Condition For sale is a high-quality and very well-maintained industrial mezzanine platform with a total area of approx. 1,900 m². The platform features a robust steel construction (C-sections, sigma profiles, columns, 5 staircases) and is equipped with a flooring comprising both wooden panels and hot-dip galvanized gratings. Dksdpjw Hf Akofx Ahuow Ideally suited for: - Storage & logistics - Production & workshops - Exhibition construction or events - Intermediate platforms / storage mezzanines Technical data: - Surface area: approx. 1,900 m² - Flooring: wooden panels & galvanized steel gratings (50% / 50%) - Condition: used, but in good condition - Stable & load-bearing (up to 500 kg per m²) - Demountable & reusable The platform is currently dismantled and can be inspected by appointment. Transport to be organized by the buyer – support can be provided if needed. The price refers to the entire 1,900 m² platform. Viewing possible by arrangement.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Djdpfsxn Rqmsx Ahuskw

Condition: good (used), functionality: fully functional, Ring shredders are the ideal high-speed pre-shredders for shredding and processing light scrap. The ring shredders are equipped with impact rings that break up the material and release the metals. The impact rings are mounted on four secondary shafts, which are located on the rotor. Replaceable wear parts ensure a virtually indestructible machine, and the easily replaceable grates are available with different hole sizes for flexible production. Dkjdpsu S R U Ejfx Ahusw

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,550 mm, loading space length: 8,900 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: Dodpfx Aexqkayjhuokw - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: new, Technical Data for Shelf Racking System: Racking System: META Type: CLIP Assembly Technical Data: Number of Rack Rows: 01 unit Rack Length: 1,100 mm Number of Bays per Rack Row: 01 unit Number of Mesh Grating Shelves: 05 units Scope of Delivery: 02x Uprights, new Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustable pitch: 25|25 mm Dedpfsxdkhqox Ahujkw Incl. base plates, end caps, and reinforcing bar Uprights are pre-assembled 2,000 mm high 535 mm deep 05x Mesh Grating Shelf, new Material finish: Sendzimir galvanized Total width: approx. 1,000 mm Total depth: approx. 500 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Support bars (03 pieces): 450 x 18 mm Weight per piece: approx. 3.88 kg Max. load per shelf: 200 kg with evenly distributed load 04x Levelling Plates, new Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material finish: Sendzimir galvanized 20x Shelf Supports, new Weight per piece: approx. 0.014 kg Material finish: Sendzimir galvanized 01x Cross Brace, new Material finish: Sendzimir galvanized 01x Load Sign Indicating bay and shelf load, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your Contacts in our Company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Any transport or shipment of this item beyond collection will incur additional costs, which can be requested separately depending on the delivery location and delivery scope.

Condition: used, Wood chip boilers Schmid UTSR 900 and UTSR 240, output 900kW + 240kW, year of manufacture 1997, moving grate combustion system (suitable for lower fuel quality), including pneumatic cleaning for 900kW, including ash removal system into container, including multicyclone separator, including feed screw, including walking floor with hydraulic unit - 2 pieces push rods 11m length, 3m total width, including control system, heat exchanger of 900kW unit is leaking, including 2 pieces of 5000l buffer tanks, including chimney systems, disassembly must be carried out by the buyer! Including system documentation! More pictures on request! Heating station layout available! Dodovyrwpspfx Ahuekw

Condition: new, Year of construction: 2024, We offer: Pellet machines from the WALW-Solutions brand in unique quality, with honest work, at an honest price. Honest work: We produce our systems directly in Poland. Only components such as gearboxes and motors are purchased from well-known manufacturers. Everything else is designed and built in-house, which means we can meet every requirement. Djdpfxjlt Ugts Ahujkw Honest price: We produce in Poland and stand by it. Other competitors who write "Made in Germany" on their products only assemble them in Germany and usually source components from Lithuania. We let you benefit from the low production costs, which means that our offer price is usually 40% lower than that of our competitors. These machines for producing pellets are completely new on the market in this price/performance segment and unique in Europe! You can only get WALW-Solutions machines exclusively from us! From systems for processing the company's own sawdust from firewood processing or from your carpentry shop, to the professional production of pellets on an industrial scale from wood chips, straw, miscanthus, ... - but also for the production of hay or straw cops, we can make you the right offer! Our systems have a capacity of 150kg / hour up to 5t / hour. And have all the necessary components to implement a fully automated system. For this purpose, we find the right solution for all raw materials or options for integrating automation into existing systems. All machines and controls are equipped with components from Siemens, ABB, Schneider Electric or similar. Please note that if you have a VAT ID, net purchases are also possible! We look forward to your inquiry! If you are interested, please contact me directly on my mobile at:

Condition: new, The Turnado 280/1500 PRO is a state-of-the-art Conventional Horizontal Lathe from KNUTH, designed for robust and precise machining in the Engine Lathes category. This model embodies over 20 years of excellence, integrating modern advancements into the classic lathe framework. It features a new ergonomic design that enhances user operation and comfort, while the powerful main spindle drive ensures high torque across an extensive speed range. Significantly, the Turnado lathe maintains constant cutting speeds during face turning, adapting to the workpiece diameter for optimal results comparable to CNC machines. Its solid base, consisting of a heavily ribbed bed and rigid headstock, promotes durability and reliability. With features like a central lubrication system for maintenance ease, a micrometer bed stop for repeatability, and a suite of standard equipment, including quick tool change systems and a 3-axis position indicator, this lathe stands out in both performance and efficiency. To experience the benefits of the Turnado 280/1500 PRO for your machining needs in the Engine Lathes category, request a quote today. Dodpfx Ahsuyinvsuokw

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Dodoxfvahspfx Ahujkw Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: used, mileage: 19,537 km, power: 129 kW (175.39 HP), gearing type: mechanical, overall weight: 7,490 kg, first registration: 12/2021, next inspection (TÜV): 05/2026, loading space length: 6,400 mm, loading space width: 2,400 mm, emission class: euro6, color: white, number of seats: 3, total length: 8,350 mm, total width: 2,450 mm, total height: 3,060 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Fuso Canter 7C18 Construction Equipment / Aerial Work Platform Transporter * Body with rear slope and aluminum loading ramps * Grating floor * Aluminum front wall * Rear supports * Electric windows * Automatic climate control * Radio * Central locking * Disc brakes * Tow bar * Spare wheel carrier with spare wheel Dedpfx Ahow A T U Heuskw * Wheelbase: 4,300 mm * Tires: 205/75 R 17.5 * Unladen weight: 3,790 kg For further information, we are at your disposal.

Condition: good (used), The scope of delivery includes: 02x shelf stand, used Material color: sendzimir galvanized upright profile: 85 x 75 x 2,00 mm upright height: 1.455 / 1.300 mm upright depth: 1.100 mm 04x shelf traverse, used material color: orange box profile: 120 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized 03x wire grating, new material color: sendzimir galvanized Execution: mounted shelf gratings, canted on both sides depth: (bearing bar direction) approx. 1.125 mm for upright depth: approx. 1.100 mm clear width: approx. 965 mm width: approx. 885 mm crossbar support: approx. 65 mm mesh width: approx. 95 x 45 mm material thickness wire: approx. 4,5 mm maximum loadable up to 800 kg with evenly distributed load 03x Trapezoidal sheet, II. choice Color outside: RAL 8012 red brown Color inside: similar to gray-white Sheet length: 1.500 mm Panel width: 1.075 mm Cover width: 1.035 mm Profile: 35 / 207 01x verge angle, new length: 3.000 mm Material color: RAL 8012 red brown size: 100 x 100 mm thickness: 0,75 mm Finish: 90° folded 25x screws 5,5 x 40 mm A2 max. drilling capacity: 13 mm with 16 mm sealing washer, drill point u. Approval ETA-13/0183 06x screws, 4,8 x 20 mm galvanized, self-tapping for wooden substructure Technical data of the firewood shelter: Total width: approx. 2.900 mm Djdpfx Ahsdvgxieuekw total depth: approx. 1.515 mm total height: approx. 1.535 mm volume to be stored: approx. 3,15 m³ Information: The pictures are sample pictures for clarification of the construction. to illustrate the construction. The material color of the stands and trusses shown may differ. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Year of construction: 2022, operating hours: 919 h, Claas Lexion 6800 TT Year of manufacture: 2022 Engine hours: 918 Drum hours: 635 Hectares: 2,474 Current equipment: - LASER PILOT steering system, left - Header drive M, constant - Header feed roller with 2-way system, M - HP channel – AUTO CONTOUR, chain, open return pulley - Automatic hitch - Dust extraction for E/V/HP channel - Hydraulic top link for HP channel - Header brake - APS threshing system – grain/maize (10/18/18) - Threshing drum drive – 330-930 rpm - Threshing concave segment - Center guide for straw walkers, mounted - JET STREAM cleaning, incl. 3D and grass wind reduction - Returns volume measurement with CEBIS display - Upper and lower sieves, TM6 - Grain tank 12,500 liters - Grain tank preparation with unloading aid for grass - Grain tank discharge auger L, Ø 330 mm - Grain tank unloading rate 110 l/s - Grain tank unloading drive 80 l/s – 130 l/s - Fixed spout – grain tank discharge auger L, Ø 330 mm - Radial spreader – SPECIAL CUT - Swath former – radial spreader - Straw chopper drive for radial spreader – premium - Drive axle XL – TERRA TRAC - Support wheels for track system - Recovery lugs for TERRA TRAC front axle - TERRA TRAC track width 635 mm - Access ladder with anti-collision protection – TERRA TRAC - Steering axle M, adjustable - Steering axle tires 500/85 R24 x 275 IMP, 8-hole - Travel speed 30 km/h - Without railings - Mercedes-Benz OM470 LA – 340 kW/462 HP (Stage V), air-cooling - Fuel tank 950 liters - Engine PTO pump - A/C-MATIC – automatic climate control with heater - Radio with MP3 function - Roller blinds for side windows - CEBIS terminal with armrest, standard - Camera system, pre-installed - Camera – rear, display in terminal - Camera – hitch, display in terminal - LAAS Remote Service incl. five-year license - TELEMATICS advanced license – 1 year - Comfort seat, air-suspended - LED work lighting – Plus - Large toolbox incl. instructor’s seat - CEMOS AUTOMATIC – AUTO SLOPE - CMOTION multi-function lever - Automatic module - Add-on module 1 - Add-on module 2 - Slope sensor - Steering angle sensor - CLAAS communication module (LTE) - Central locking system, standard - LED tail lights, extendable - CAN Ethernet Gateway (CEG) - FIELD SCANNER/LASER PILOT/AUTO PILOT ready - Automatic discharge direction adjustment Dsdpfjxq Sfkox Ahuokw - Straw chopper – counterblade/grate adjustment, hydraulic - Rear-view mirrors, electrically adjustable - Automatic chain lubrication for grain tank unloading Incl. Vario 930 header Incl. transport trailer | Internal no.: 11064749

Condition: new, machine/vehicle number: 3c70e9a5d82cfb3ada79baf95, empty load weight: 8 kg, maximum load weight: 17 kg, overall weight: 26 kg, axle configuration: 2 axles, tire size: 205 / 65 r 17,5, Further information Chassis semitrailer forwarding Welded fine-grained steel construction, fifth wheel plate with replaceable 2 kingpins, rear bevel to approx. 1920 mm, suspension bar for ramps at the rear and front on gooseneck, grinding rollers at the rear, drop center after cranking up to the axle unit. Drawing approval required from customer in case of order! Pair of lashing lugs at the top and side of the outer frame, 10 tons each Pair of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support, mounted on the outside Wheel chocks with holder Aluminum side collision protection Steel underride guard for EG, if technically possible Quarter-shell mudguards with anti-spray flaps according to EG 1 pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, sloping towards the entrance. Length at bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on rear slope. Depth approx. 200 mm. Note! Frame in main beam area 200 mm higher than wheel recess. In the event of an order, a precise technical inspection is still required. Wheel recess cover can be pulled out from the drop deck with hardwood inserts, on rear slope with hardwood inserts. Electric cable winch, 24 volt, pulling force 5500 kg, mounted in the offset gooseneck, not reaching into the loading area, operation with radio remote control, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller on rear slope. Axles + suspension SAF or BPW drum brake axles of our choice Air suspension with lift & lower valve + auto-reset function Wheels and tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 to tire load capacity at max. 90 km/h at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Haldex, electronic brake system with EBS socket at the front, without connecting cable (sent to the customer for approval brake calculation.15.07.2021) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for display via display in the cab, truck must be prepared accordingly, no truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / checker plate covering 30 mm screen-printed floor, in the drop floor between the longitudinal beams in the middleIn the tramline area covered with toothed grating in the wheel recesses with steel/checker plate covering. Access ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for entering the drop deck Dedpfx Ahoi Ri Hreuokw Pair of steel ramps for crossing on gooseneck Drop sides Approval / plates Country of approval: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Contour markings with reflective strips to ECE R 048, yellow at the sides and red at the rear Warning sign according to ECE -

Condition: used, maximum load weight: 29,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 02/2026, loading space volume: 34 m³, Year of construction: 2019, Equipment: ABS, Ref. no. 5619 Rent, purchase, or rent with a purchase option by arrangement! 33,500 Liter Berger/Santi V2A Food Grade Tank Trailer / Insulated / 3 Compartments / Heating Jackets ---- * Manufacturer: Berger/Santi * Model: SAPL 24 * First registration: 02/2019 * Gross weight: 35,000 kg * Unladen weight according to registration: 5,700 kg * Payload: 29,300 kg * Axles: 3 x SAF with 1st axle as lift axle / disc brakes * Suspension: Air suspension with raise and lower function * Tires: 385/65 R 22.5 approx. 40% on aluminum rims * Color: Chassis grey, tank white * Main inspection: 02/2026, Safety inspection: 08/2025 * Wabco EBS * Volume: 33,500 liters in 3 compartments * 3 x V2A manhole covers in V2A box * Access ladder with walkway on the right, operable from below * Aluminum grating between manhole covers (completely walkable from above) * 3 individual outlets on the right * 3 thermometers * Connection for hot water heating at the front (heating jackets) * Wabco Smartboard * LED reversing lights * Full-load landing gear * Single wheel mudguards * Aluminum air tank in front of the 1st axle * 1 owner German trailer!! German registration documents!! Rent, purchase, or rent with a purchase option by arrangement! Note regarding possible errors in the listing: Despite careful preparation, errors may have crept into the description or the information provided. We assume no liability for mistakes, alterations, or prior sale. All information is provided without guarantee. Please contact us to verify details or discuss further questions. Djdpfx Aswuyxvshuskw

Condition: used, mileage: 19,537 km, power: 129 kW (175.39 HP), gearing type: mechanical, overall weight: 7,490 kg, first registration: 12/2021, next inspection (TÜV): 05/2026, loading space length: 6,400 mm, loading space width: 2,400 mm, emission class: euro6, color: white, number of seats: 3, total length: 8,350 mm, total width: 2,450 mm, total height: 3,060 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Fuso Canter 7C18 Construction Equipment / Aerial Work Platform Transporter * Body with rear slope and aluminum loading ramps * Grating floor * Aluminum front wall * Rear supports * Electric windows * Automatic climate control * Radio * Central locking * Disc brakes * Tow bar * Spare wheel carrier with spare wheel * Wheelbase: 4,300 mm * Tires: 205/75 R 17.5 * Unladen weight: 3,790 kg For further information, we are at your disposal. Dkedpfx Ahew A T Uaoujw

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4105 mm and 3rd to 4th axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the middle for fastening the winch cable 12 lashing eyes centrally embedded in the floor, each 5 to. (not included in Inkl. rear slope) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. Each with 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Dodpfx Ahsk Unitjuekw Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) Dodpfxoxp S Uvs Ahuskw - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: used, machine/vehicle number: 7e3bf6da9bda95b470a3b0a97, empty load weight: 5,340 kg, maximum load weight: 12,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2021, tire size: 235/75 r17,5, Year of construction: 2021, Further information Chassis central axle trailer Fine-grained steel welded construction Type TPS 200 (special approval required) Front gear support leg Folding rear support Wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Spray flaps in front of each axle and anti-spray flaps behind each axle 1x spare wheel holder for 1 e-wheel, with wheel mounting kit 1x spare wheel, same make as basic tires, steel rim 1x stainless steel storage box, w=600/h=400/t=500 mm, with polished door, lockable Low loader lashing eyes 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) 7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 2 pairs of hinged lashing eyes additionally embedded in the low loading area, 10 tons each1 pair at the front and 1 pair at the rear slope Central axle trailer towing device Tow bar with tested 50 mm towing eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technical) Air suspension Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake Duomatic connection at the front, with connection line to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 235/75 R17.5 Fulda brand Dkjdpjp N Dgujfx Ahuew Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin plug at the front, with connecting cable, 1 additional LED work light(s) at the rear, switched via reversing light 1x LED rotating beacon with holder, switched via parking light (removable light) Floor then with 70 mm softwood floor, steel/ checker plate flooring in the wheel housing area Rear slope with Mega Grip covering made of toothed grating Deep loading area incl. rear slope 6500 mm Front bulkhead / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, pluggable Drive-on ramps Steel ramps 3600 mm long, 750 mm wide, divided via cable extension, laterally movable, Ramp displacement, minimum gap approx. 600 mm, maximum outer width approx. 2880 mm Ramp surface with Mega Grip made of toothed grating Hydraulic operation via own electro-hydraulic unit, mounted in the steel box, operation on the side in FR right . Note: Nato socket with connecting cable required on the truck. The connecting cable must not be connected while driving! Hydraulic lateral displacement of the drive-on ramps, individually controllable (only in conjunction with hydraulic ramp actuation) Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) A special permit is required for axle loads of 10,000 kg. The approval must be applied for individually in each federal state

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,550 mm, loading space length: 8,900 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Dkjdpfxjt T H Ske Ahujw Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Djdpfx Ahsi Riyteuokw Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the center for fastening the winch cable 12 lashing eyes centrally embedded in the floor, 5 tons each, (not included in Incl. rear sloping) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. In each case 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension belts. Ramp tip offs