Heavy-duty grilles

Condition: used, machine/vehicle number: 91132839, Year of construction: 2018, operating hours: 9,548 h, No reserve price – guaranteed sale to the highest bidder! Note: The forklift was inspected after relocation. As the necessary transponders are missing, a complete inspection could not be performed. The following defects are known: - Seat locking lever broken off - Switch on steering wheel defective - Left side cover deformed - Access module damaged – button defective - Transponders missing The forklift has already been dismantled for transport. MACHINE DETAILS Ijdpfxsy Nzl To Amietg Operating hours: 9,548 h The following technical data is taken from a manufacturer’s data sheet (attached). The seller cannot guarantee its accuracy: TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Load distance: 401 mm Load distance, mast extended: 215 mm Wheelbase: 1,410 mm MACHINE DETAILS Total weight: 3,438 kg Axle load without load front/rear: 2,292 / 1,146 kg Axle load with load, forks forward front/rear: 902 / 4,132 kg Axle load with load, forks back front/rear: 2,024 / 3,014 kg Tyres: PU Tyre size front: Ø 343 x 114 mm Tyre size rear: Ø 285 x 100 mm Wheels, front/rear: 1x / 2 Rear track width: 1,168 mm

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Itodpfjh Tfqhjx Amisg • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Itedpfx Asy I Tvnomijg Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Program run: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: KMM 540.1196, travel distance X-axis: 3,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 15 M, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 06/06/2026! TECHNICAL DETAILS Ijdpfx Amsy Rl Aljistg Travel X-axis: 3,000 mm Travel Y-axis: 550 mm Travel Z-axis: 550 mm MACHINE DETAILS Control: Fanuc 15 M Rotary axis: Fibro NC1

Condition: good (used), Just beams for sale: Meta 2700*100 mm 2400 kg/level 10 EUR/piece HLF 3300*140 mm 3200 kg/level 12 EUR/piece Hilo (new type) 3100*100 mm 2000 kg/level 11 EUR/piece Dexion P90 3600*100 mm 1400 kg/level Dexion P90 Silverline 2700*125 mm 2400 kg/level If you require racking or accessories in other configurations or designs, please do not hesitate to contact us. We offer a comprehensive range of new and used racking systems and accessories, and will gladly support you with your planning. Further accessories available, for example: Frames, corner and impact protection, load-through safety bars, chipboard panels, mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postcode and location, as well as the desired quantity. Iodpoq Tpk Iefx Amistg Additional services: Planning, racking assembly/disassembly, purchasing/sales. Technical data, information, and prices are subject to change and errors. Intermediate sale reserved!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, The machine can be inspected while powered on until May 4, 2026! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously maintained by Trumpf and has a complete service record. The cylinders are sealed and have no oil leaks. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam operating time: 15,396 h Hydraulic operating time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT Itedpfx Ajy Hqc Nsmisg CE marking Documentation/Manual Rear stop with sensors CNC crowning BendMaster (Robot with 8 m travel path) Vacuum manipulators CNC gripping station Double sheet detection BendGuard LaserSafe safety device Spare parts: Cable track, spare vacuum plate, BWF fixators (machine feet)

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, laser power: 6,000 W, laser source model: TruFlow 6000, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connected load: 114 kVA Mains connection: 400 V Control voltage: 24 V Fuse protection: 200 A Compressed air connection: 6 – 14 bar Iodoy Hqahspfx Amiotg Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm

Condition: excellent (used), Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you a used pallet rack beam Iedpfxjd A Sm Te Amijtg Nedcon manufacturer for sale to. Technical specifications of the pallet shelf traverse: Shelf system: Nedcon Type: NS Currently available: approx. 5,000 pieces included are included: 01 x pallet shelf beams, used Material color: RAL 2008 bright red orange Box profile: 90 x 40 mm Cage type: 4 hooks Clearance: 1,900 mm maximum load per pair of traverse 2,000 kg, at gleichm. distributed load 02 x locking pins, used Execution: compl. zinc-plated To secure the beam against unintentional lifting Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Iodpfxsy Nmxxs Amistg Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, No reserve price – guaranteed sale to the highest bidder! The machine was last overhauled in 2024! Itsdpoy Nkzqsfx Amieg TECHNICAL SPECIFICATIONS Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Service and inspection history dating back to 2019

Condition: used, TECHNICAL DATA • Manufacturer: META • Frame height: 3,900 mm • Floor width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Surface: galvanized • Condition: used Large quantities available immediately. Tiered net unit prices excl. VAT: Itedpouba Rbsfx Amijg Starter bays: • 1 - 5 bays: €136.90 net each • 6 - 20 bays: €132.94 net each • 21 - 50 bays: €128.98 net each • from 51 bays: €125.02 net each Add-on bays: • 1 - 5 bays: €94.00 net each • 6 - 20 bays: €89.30 net each • 21 - 50 bays: €84.60 net each • from 51 bays: €79.90 net each Available ex stock Nordhorn. YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at additional cost. Extra charges depend on the place of delivery and shipment size and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands on favorable terms. If you have questions, please do not hesitate to contact us. Four wins – The building blocks of DLK’s success: Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Distance between chucks: 625 mm Travel in X-axis: 310 mm Travel in Z-axis: 640 mm Travel in Y-axis: +70/-50 mm Travel in B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm ASA 8" A2 Maximum counter-spindle speed: 4,500 rpm ASA 6" A2 Spindle bearing outer: 200 mm Iedjy Hk Nispfx Amistg Spindle bearing inner: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool positions: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 42,654 h Total running hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Itedey Hk E Rspfx Amieg Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: good (used), 70 running meters of shelving Schäfer type R7000 used, good condition, see pictures height 3 m depth 50 cm load / compartment 200 kg bay width ca.99,8 cm Itjdpfjh Et Twsx Amieg Negotiable price: € 9.490,-- net ex stock Offer consists of: + 71 pcs. uprights or frames, 3 m galvanized +350 pcs. Shelves, 200 kg load/shelf, galvanized 5 levels per bay (more are of course possible at extra cost) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, Jungheinrich forklift from 2025 with only 15 operating hours! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,000 mm Free lift: 150 mm Load center: 500 mm Fork length: 1,200 mm MACHINE DETAILS Isdpfx Ajy Nc Rwomistg Power type: electric Mast type: Duplex Power: 9 kW Battery capacity: 750 Ah Remaining battery capacity: 100% Battery voltage: 48 V Tyre condition: 100% Own weight without battery: 2,350 kg Battery weight: 962 kg to 1,094 kg Operating hours: 15 h EQUIPMENT Lighting Clamp hydraulics Pallet forks Side shifter Fork rotator (180 degrees)