Used Granules for sale (718)

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ storage silos made of stainless steel (material 1.4301) (formerly plastic granulate silo) Technical data / Dimensions Available quantity: 2 Volume: approx. 172,000 liters Container type: Silo Condition: used Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 20,000 mm Weight: approx. 9,000 kg Specific weight of the medium: 0.6 tons/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Credpfx Aqoxvtvusvsi Material / Properties Material of inner lining: Stainless steel Notes: Material: 1.4301 Support structure: Base ring / base flange Type of bottom: Conical bottom Slope: approx. 15% Type of bottom (lower part): Cone Cone angle: 60 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eyes 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded-in nozzle for full level indicator 1 x flange DN 100 (filling) 1 x vent with cap Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in a TW connection 1 x welded-in adapter for empty level indicator Bottom: The silos end at the bottom in a 60° cone with an emergency shut-off valve and a mounted extraction spout (see photos). A three-section ladder with back protection and rest platforms is available as an option.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals Cjdeq Igyvjpfx Aqvsri - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Originates from a cleanroom manufacturing process, plastic granules. Industrial vacuum cleaner for compressible material. The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. • Reduces downtime through continuous cleaning • Compression and easy removal of the collected material • Dust removal from the work environment • Recycling of trimmings • Flexible due to different performance classes • Container sizes, maintenance-free • Simple monitoring • Unattended operation possible. Crsdpew D Upzjfx Aqvoi Nilfisk industrial vacuum cleaner R104 V 4031600000 Article number: NILFISK-4031600000 R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Industrial vacuum cleaner for compressible material The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop.

Condition: good (used), Year of construction: 2002, functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Crsdpsw U Swpsfx Aqvji Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. Credpfx Aqjx D Df Njvei - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9665, Equipment: freezer, Airproducts Cryo Trim S3 (800) (year 1992/refurbished 2018); serial no. 9665 Csdpfxox A Site Aqvsri - cleaning of frozen parts by blasting with plastic granulate (greater than 2 mm³ – CG 45 granulate or larger) - machine dimensions: height approx. 3.4 m, length (open or closed—does not change due to conveyor belt) approx. 4.1 m, machine width = conveyor belt approx. 2.8 m

Condition: new, Big-bag emptying station with cyclone separator For sale is a big-bag emptying station with an integrated cyclone separator, ideal for the low-dust handling and discharge of various bulk materials such as plastic granules, ground materials, powders, or recycled materials. Crodpfx Aszpw U Ueqvji The system is in fully functional condition and is available immediately. An inspection can be arranged at any time at our warehouse in Wuppertal.

Condition: used, Year of construction: 2010, Technical details: • Edge material thickness for strip material: 0.4–6 mm • Edge material thickness for coil material (depending on material): 0.4–3 mm • Edge material height: max. 65 mm • Workpiece thickness: 6–60 mm Credpszxww Ujfx Aqvsi • Minimum workpiece width: 65 mm • Minimum workpiece length: 160 mm • Feed speed: 10 m/min • Integrated control panel on the front side, in the infeed area • Control system: PPC 221 – Power PC • Pull-out workpiece support table, extension: 600 mm • 1801 Pre-milling unit with diamond milling cutter (1 × 0.8 kW, 1 × 1.2 kW, 200 Hz, 12,000 rpm) • 1903 Edge band magazine, pre-cutting up to 3 mm • 1906 MG combined glue application unit (cartridge and granulate) • Pressure regulator for cartridge glue application with pneumatic control • 1912-3 Pressure roller unit • 1918 Pneumatic end-trimming unit • 1827 Multifunctional milling unit (pneumatic control) • 1832 Corner rounding/milling unit • 1929 Scraper unit, R = 2 mm • 1964 Flat scraper Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. Crsdpfx Aqozy Hrqjvsi The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Year of construction: 2026, condition: new, The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 70~90Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 18.5 кW 4. Total Power: 29 кW Crsdpjz Alnpofx Aqvsi 5. Screw Dia. : 90mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE, LLDPE pelletizing, scraps or rolls

Condition: good (used), Plummer block housings, bearing blocks for shredders, crushers, water mills, chippers, cutting mills, granulators, and cutting granulators -Quantity: 1 piece heavy-duty steel pillow block housing -Type: Bearing block, inner diameter: 320 mm Crsdpfxedaa Hue Aqvsi -Axis/Center of housing: 190 mm -with: shaft seal discs -Quantity: 1x bearing block available -Suitable for: Bearing abbreviations 22236/22330/23064/23138/23236, not included in the scope of delivery -Suitable for: Bearing abbreviations 22236K/22330K/23064K/23138K/23236K, not included in the scope of delivery -Dimensions: 560/190/H395 mm -Weight: 228 kg

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Container capacity: 120 kg / 200 L Csdpfjd R Atrjx Aqvori L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Screw, removable - Control for mixing times - Extraction device - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake.

Condition: excellent (used), Year of construction: 2001, Briquetting press for metal chips or granules only tested on a trial basis hardly used 20 operating hours 2000 kg/cm2 Csdpfxefb T Huo Aqvjri

Condition: good (used), For sale: a gate runner mill. Voltage: 400 Amps: 2.29 Granulate sieve, diameter 4.9 mm. Machine buying and selling WE BUY / SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Crsdpehzqz Isfx Aqvsi For more information or to contact us, please visit our website.

Condition: new, Year of construction: 2023, machine/vehicle number: P7YXXX, SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. Cjdpfxshukfms Aqveri The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

Year of construction: 1993, condition: good (used), Underwater cutting head for BFM, used for the granulation of PE, PS, and PA. Crsdeipyh Ijpfx Aqvei

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-Series ( S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to 5 (optional #000,5). The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! The capsule filling machine SPT-FS80 for general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Csdpfx Ajdy Dynoqvjri Installation and service from Germany Number of capsule holder per segment - 10 psc/h; Max.production quantity of capsules - 80 000 psc/h; Weight of machine - 2 500 kg; Space consumption - 1320 x 1050 x 1970 mm

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to #5. The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! The capsule filling machine SPT-FH150 for general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Number of capsule holder per segment - 20 psc/h; Max.production quantityof capsules - 150 000 psc/h; Credpfx Aqsdy Dyzjvoi Weight of machine - 2 500 kg; Space consumption - 1750 x 1750 x 2100 mm

Condition: refurbished (used), Hosokawa Mikropul ACM 10 fine mill / classifier mill with new control cabinet and accessories We are offering a Hosokawa Mikropul ACM 10 fine mill in very good condition - an ideal solution for the precise crushing and classification of powders and granules. Technical data: • Model: ACM 10 • Motor power: 9.2 kW • Condition: Very good condition (refurbished), with newly built control cabinet Additional details: • Classifying sieve available: A subsequent classifying sieve is also in stock. • Comparable mills: We have similar/analog mills in stock that work on the same principle as the ACM 10. Advantages of the ACM 10: Crjdpfxovn Rias Aqvsi • Compact design: Saves space in production • Energy efficient: Optimized for lower power consumption • Flexible use: For processing chemicals, food, pharmaceuticals and more Condition and inspection: The machine would be ready for use quickly and can be inspected by arrangement. We also offer technical accessories and spare parts for seamless integration into your production. Contact us for more information or a customized offer.

Condition: good (used), container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 230 liters -Number: 2x containers available -Price: per piece Codpsvpdrdefx Aqvori -Dimensions: 750/700/H890 mm -Weight: 62 kg/piece

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, Volumetric dosing systems - granules, powders and ground material We offer a range of fully functional volumetric dosing systems that are ideal for conveying granules, powders and ground material. • Various models available: We have different dosing systems in stock that can be adapted depending on the material and application. Cedjvmylzopfx Aqveri • Testing option: On request, we will test the dosing devices with your material to ensure that they meet your requirements. • Reliable function: All systems are tested and ready for immediate use. Contact us and we will help you find the right doser for your requirements. We are happy to answer any questions or provide advice!

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder: ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 28 Codstpvdhjpfx Aqvori ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Filling opening: 1446 x 1342 mm ✔ Weight: 1750 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Crsdpotpwlrjfx Aqvji Technical data: Shredder: ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Weight: 2450 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 12CG001009, Used GEA continuous mixing and granulation system, model ConsiGma1, stainless steel product contact surfaces, with Brabender feeder, twin screw continuous mixer, and fluid bed dryer granulator, with controls, CE and Ex rated, 400 volt, 50 Hz, seiral# 12CG001009, built 2012. Cedpfx Aqstvm Uljvsri

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Crsdpfx Aqjtltvzovoi Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.