Used Grain Drain for sale (1,424)

Condition: used, Year of construction: 1975, Manufacturer : Oskar Krieger Maschinen Model: Fondo Mat Universal 500 Year : 1975 Type: Melter / process vessel   Classification: ATEX Up/down: hydraulic unit Mixing head rotation: manual Stainless steel coil: liquid and/or steam Mixing: 705 rpm Vacuum and pressure tight lid : -1 / +1 bar Maximum temperature: 140°C diameter of filling port: DN200   Vessel : total capacity: 700L useful capacity: 500L capacity up to tank rim: 615 L pressure: -1 / 3 bar temperature: 130°C recommended drain valve size: DN40   Gkedpfox R Dbtox Adlea Jacketed : capacity: 68 L pressure: 6 bar temperature: 160°C insulation thickness: 45mm   Weight: 1520 kg Can be combined with the following equipment: / Technical documentation available.    

Condition: used, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2021, Equipment: ABS, D-Tec FL-3-S Steel Tipper 57 m³ Exceptionally clean vehicle! * Load compartment length: 11,516 mm * Height: 3900 mm * Width: 2550 mm * Permissible total weight: 36,000 kg * Unladen weight: 7640 kg * SAF axles with disc brakes * 385/65 R22.5 tires * ABS * Aluminum rims * Aluminum support legs * Air suspension * Wheel chocks * 1st axle: lift axle * Open side impact protection * Grain chute * A-sign * Plastic toolbox * Platform * Rollover tarp, 680 gr/m² * 5x tarp holders * Multi-chamber lights (standard) Gjdjzuhrbopfx Adlska * 4x work lights * LED marker lights with flashing function * Acoustic reversing warning We are available for further information.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, GUTENBERG MASTER BAG 300X (2026) – PPWR-READY High-Speed Square-Bottom Paper Bag Machine High-speed, fully automatic roll-fed machine for producing square-bottom paper bags without handles. The MASTER BAG 300X is designed for industrial paper-bag manufacturers supplying food, bakery, retail, agricultural and European packaging markets. The PPWR-READY EDITION combines efficient bag production with controlled production recipes, approved-material management, batch traceability, waste monitoring and quality documentation. Main features Production speed: up to 180 bags/min Fully automatic roll-fed production Fully servo-driven control system Automatic paper feeding and tension control Precision tube forming and cutting Controlled side-seam and bottom gluing Automatic bottom folding and forming Automatic stacking and counting Multilingual HMI touchscreen Production of printed and unprinted bags Optional inline flexographic printing unit Suitable for approved kraft and coated-paper structures CE conformity for machinery safety PPWR-READY production package The machine can be configured to support the controlled production and documentation of paper bags designed for conformity with Regulation (EU) 2025/40 on Packaging and Packaging Waste—PPWR. Available functions include: Registration of paper supplier, grade and batch Recording of coatings, inks and adhesives Approved-material lists for each bag specification Password-protected production recipes Prevention of unauthorised material substitutions Customer, product and SKU identification Raw-material-to-finished-bag lot traceability Operator identification and production timestamps Paper, adhesive, waste and reject monitoring Recording of dimensional and bonding inspections Production batch and traceability reports Support for technical documentation requested by EU customers Barcode or QR-code material identification option Camera inspection and automatic reject options Suitable applications Flour, sugar, rice, pasta and grains Coffee, tea, spices, lentils and nuts Dried fruit and bakery products Bread, pastries and takeaway food Grocery and retail paper bags Seeds, animal feed and pet-food products Herbal products, powders and supplements Hardware and small industrial parts PPWR-READY acceptance test Final acceptance can be performed using the customer’s actual paper, coating, printing ink, adhesive, bag dimensions and intended filling weight. The test can confirm: Dimensional accuracy Side-seam and bottom integrity Stable production speed Gkodpfxowzm I Ro Adlea Glue consumption Waste percentage Production traceability Batch-report generation Important regulatory information The MASTER BAG 300X is a PPWR-ready production platform. Final PPWR conformity applies to each finished paper-bag specification and depends on the actual paper, coating, ink, adhesive, components, intended use and recycling pathway. Machine CE conformity covers machinery safety and is separate from PPWR conformity of the finished packaging. Model year: 2026Machine type: Square-bottom paper bag machineBag type: Without handlesMaximum speed: Up to 180 bags/minCondition/configuration: Available according to selected equipment package Contact us for price, complete technical specifications, material trials, factory acceptance testing, installation, and delivery conditions.

Condition: used, maximum load weight: 27,700 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space volume: 88 m³, total length: 14,040 mm, total width: 25,500 mm, total height: 4,000 mm, Equipment: ABS, Knapen K502, side doors, sliding floor, 92 m³, in excellent condition Gjdpfx Adjzt T Hboloka * BPW axles with air suspension and disc brakes * 1st axle can be lifted * Alcoa aluminum rims * Tires: 385/65 R22.5 * Grain hopper * Roll-up tarpaulin roof * 2 storage boxes * Work platform with access ladder * Ladder holder * Wabco SmartBoard We are happy to provide further information.

Condition: used, empty load weight: 7,920 kg, maximum load weight: 27,080 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,515 mm, loading space width: 2,480 mm, loading space height: 2,725 mm, loading space volume: 93 m³, total length: 13,600 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 7,900 mm, color: black, gearing type: mechanical, Equipment: ABS, Lease rental with no down payment, 72-month term with final balloon payment. Technical Data Weights: - Fifth wheel load: approx. 11,000 kg - Permissible axle load: approx. 24,000 kg - Permissible total weight: approx. 35,000 kg - Unladen weight according to DIN 70020: approx. 7,920 kg - Payload according to DIN 70020: approx. 27,080 kg Dimensions: - Exterior dimensions (body): approx. 13,600 x 2,550 mm - Platform size: approx. 13,515 x 2,480 mm - Rear loading floor height (unladen): approx. 1,142 mm - Clear tarpaulin height at rear: approx. 2,725 mm - Clear tarpaulin height at front: approx. 2,675 mm - Overall front height (unladen): approx. 4,033 mm - Overall rear height (unladen): approx. 4,017 mm - Usable volume: approx. 93.1 m³ - Tractor fifth wheel height: approx. 1,150 mm Chassis: - Integrated chassis frame made of high-quality painted fine-grain steel - Axles: 3 x 9 t axles with disc brakes Z 430 mm, for rims with 120 mm inset; centrally positioned axles - Lifting axle: automatic lifting axle (3rd axle, rear), control via EBS with brake pedal function - 1st axle (front) with traction aid - Disc wheels: 6 x 11.75 x 22.5, on ALCOA alloy rims - Tyres: 6 x 385/55 R 22.5, Continental HTR2 - Suspension: air suspension unit incl. lift and lowering device - Braking system: electronic brake system (EBS) from Knorr, compliant with DIN 7638, RSS activated, with parking brake via spring actuators, brake connections at the front bulkhead - Kingpin: 2'' Jost, compliant with DIN and ISO 1726, exchangeable from below - Landing gear: 2 mechanical, 24 t telescopic landing legs with 2 speeds and equalizing pads Floor: - Aluminum frame resting on the longitudinal members, fitted with 28 welded, closely spaced aluminum I-crossmembers (100 x 100 mm). All I-beams are predrilled at regular intervals on a special drilling jig before welding. Our patented special plastic substructure for guiding the moving floor profiles is mounted with U-brackets. The moving floor profiles are then pulled in via cable system. With this substructure system, we achieve an absolutely straight ... Gjdpfx Asx Nbgksdleka

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Gjdpfxozr Tcae Adleka Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Gsdpfx Aszr Tcgedloka Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Gkodpfx Aezr Tcyedlja Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Braking system: According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change. Gjdszr Tctepfx Adlska

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Gjdpszr Sfaofx Adloka

Condition: new, empty load weight: 3,090 kg, maximum load weight: 8,510 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, sideboards 500 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear sideboards, side sideboards pivoting and foldable, side sideboards with spring relief, platform floor made of fine-grained steel, 4 mm thick, 12 x heavy-duty lashing eyes recessed in the floor, tipping angle: 50 degrees rear tipping angle and 45 degrees side tipping angle, continuously adjustable drawbar, rear stakes can be inserted, geared support winch with load and fast gear, front, integrated receiving shaft for two aluminum loading ramps in the chassis, contour marking according to ECE R 048 regulation, surcharge for aluminum ramps, load-bearing capacity per pair 10 tons and 2 x folding supports, rear, ramps suitable for steel-tracked vehicles and vehicles with rubber tires, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more data at: !, More details: ! Godpfx Adozr Sb Ioljka

Condition: excellent (used), Used stainless steel pressure tank// buffer tank Last use: Food Item number: 10738 Volume: 1000 liters Gedsrdwlcepfx Adloka Type: Horizontal on 4 feet Material (wetted parts): 1.4571 / AISI316 Design: Single-walled Tank dimensions: Outer diameter: 900mm Cylindrical height: 1460mm Total width: 940mm Total length: 1850mm Total height: 1260 mm Materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI 304 Equipment: Outlet diameter: 35mm Distance drain to floor: 90mm Outlet valve: disk tap Sight glass Type plate: no

Condition: like new (used), Used stainless steel container / silo Last use: Pharmaceuticals Item number: 10709 Volume: 100 liters Type: Upright in stainless steel frame Height of feet: 100mm Material (wetted parts): 14404 / AISI316 Design: Single-walled Operating pressure according to type plate: ATM Tank dimensions: Outer diameter: 610mm Inner diameter: 600mm Total width: 800mm Total length: 1200mm Total height: 950mm Cylindrical height: 250mm Materials: Interior: 14404 / AISI316 Gkjdsrdxfcopfx Adlea Outer parts: 14404 / AISI316 Equipment: Type plate: No Distance drain to floor: 120mm Outlet diameter: 150mm Removable frame

Condition: used, Used stainless steel transport container / storage container Item number: 10837 Last intended use: Food Volume: approx. 650L Type: Standing on four feet with forklift tunnel Material (wetted parts): 1.4301 / AISI304 Design: Single-walled Container dimensions: Manhole: 400mm Outer diameter: 1000mm Cyl. Height: 800mm Total height: 1530mm / 1560mm Total width: 1000mm Total length: 1000mm Materials: Interior: 1.4301 / AISI 304 Exterior: 1.4301 / AISI 304 Fittings: Outlet: DN50 DIN11851 Godpfx Adjwcd T Hjleka Outlet valve: Disc valve Distance from drain to floor: 180mm Height of feet: 450mm Nameplate: No

Condition: new, Brand new, factory-fresh stainless steel tank Article number: 10632 Volume: 500 L Type: Standing on 4 legs Height of legs: 540 mm Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Operating pressure as per nameplate: ATM Tank dimensions: Gsdoza Ei Aepfx Adloka Outer diameter: 804 mm Cylindrical height: 990 mm Overall height: 1385 mm Overall width: 835 mm Overall length: 954 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Nameplate: No 2 x 3/4" socket on the cylinder Distance from drain to bottom: 395 mm

Condition: new, Brand new stainless steel container Article number: 10846 Volume: 550 L Type: Standing on a plastic pallet Material (in contact with the media): Stainless steel V2A / AISI 304 Number of fixings: Plastic pallet Bottom: Dished bottom Max. operating pressure: Atmospheric Gkjdpfx Ajv Dunfjdlsa Container dimensions: Inner diameter: 815mm Outer diameter: 890mm Total height: 1330mm Cylindrical height: 1070mm Total width: 890mm Materials: Inside: 14301 / AISI 304 Outside parts: 14301 / AISI 304 Facilities: Nameplate: no Outlet diameter: 50mm Distance from drain to floor: 160mm

Condition: used, Used stainless steel tank Item number: 10823 Volume: 1260 liters Type: Standing on 4 feet Material (wetted parts): 1.4301 / AISI 304 Design: Single-walled Operating pressure according to nameplate: ATM Max. operating temperature: +0 / +20 °C Gjdpfx Adswcd Taoleka Tank dimensions: Inner diameter: 1190 mm Outer diameter: 1210 mm Cylindrical height: 920 mm Overall width: 1370 mm Overall length: 1370 mm Overall height: 1970 mm Height of feet: 1000 mm Materials: Inner: 1.4301 / AISI 304 Outer parts: 1.4301 / AISI 304 Features: Nameplate: Yes Outlet diameter: 47mm Distance from drain to floor: 220mm Drain valve: Disc valve Removable lid

Condition: good (used), total length: 1,230 mm, total width: 1,030 mm, total height: 1,640 mm, Used stainless steel container / transport container / IBC Last use: Chemicals Item number: 10756 Volume: 1000 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Gedpfeq Rc H Nox Adloka Design: Single-walled Operating pressure according to type plate: 0.1 bar Tank dimensions: Total width: 1030mm Total length: 1230mm Total height: 1640mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: Yes Outlet diameter: 50mm Distance drain to floor: 240mm

Condition: good (used), Used stainless steel process vessel Article number: 10302 Volume: 200 liters Type: Standing on rollers Material (media-contact): V2A / AISI 304 stainless steel Number of fixations: 4 rollers Bottom: Dished bottom Top: Removable dished bottom Operating pressure according to nameplate: ATM Vessel dimensions: Inner diameter: 670 mm Outer diameter: 690 mm Height of feet: 220 mm Distance from drain to bottom: 1. 340 mm, 2. 330 mm Overall height: 1700 mm Overall width: 1020 mm Materials: Inside: V2A / AISI 304 External parts: 1.4301 / AISI 304 Equipment: Gksdpsd H Tvzjfx Adloa Nameplate: No Outlet: Bottom valve Various connections Removable top Control box Propeller agitator present

Condition: used, Used stainless steel container / transport container / IBC Last intended use: Pharmaceuticals, cosmetics Item number: 10800 Volume: 1000 liters Type: Standing in galvanized stacking frame Gksdpfsv Dt Scox Adloa Material (in contact with media: 1.4571 / AISI316 Manhole: 400mm Design: Single-walled Operating pressure according to nameplate: ATM Container dimensions: Total width: 1020mm Total length: 1220mm Total height: 1700mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI 304 Facilities: Nameplate: No Outlet diameter: DN50 Outlet valve: Disc valve Distance from drain to floor: 280mm

Condition: good (used), Used stainless steel tank with insulation Article number: 10696 Last application: Food Volume: Approx. 600 liters Type: Standing on 4 legs Material (in contact with media): 1.4301 / V2A Manhole: 2 x Ø 180mm Design: With insulation Operating pressure according to nameplate: ATM Gedpfskn R R Isx Adljka Tank dimensions: Overall width: 1120mm Overall length: 1740mm Overall height: 1085mm Cylindrical height: 410mm Materials: Inside: 1.4301 / AISI304 Outer parts: 1.4301 / AISI304 Features: Nameplate: no Outlet: 40mm Distance from drain to bottom: 330mm Height of legs: 110mm Insulation 2 x opening: 1040 x 520mm 2 handles

Condition: good (used), Used stainless steel container / transport container / IBC Last use: Chemicals Gkederdgk Ijpfx Adlja Item number: 10753 Volume: 1000 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.1 bar Tank dimensions: Total width: 1030mm Total length: 1230mm Total height: 1645mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: Yes Spout diameter: 72mm Outlet valve: Disc tap Distance drain to floor: 150mm

Condition: good (used), Year of construction: 2001, Used stainless steel container with insulation Last use: Pharmacy Item number: 10820 Volume: 5540L Operating pressure: +3/-1 bar Max. Operating temperature: +150 °C Type: Vertical on 4 feet Material (wetted parts): 1.4404 / AISI316 Design: Insulated Base: Dished base Tank dimensions: Cyl. height: approx. 1600mm Total height: approx. 3100mm Height of the feet: 800mm Outer diameter: 2000mm Distance from drain to floor: 120mm Materials: Inside: 1.4404 / AISI316 Outside: 1.4301 / AISI 304 Equipment: Gsdpfeth Sc Njx Adlska Rock wool insulation Flanged top floor Various connections on the top floor Dome cover on the top floor

Condition: used, Used stainless steel container / transport container / IBC Last use: Solvent Item number: 10848 Volume: 800 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.10 bar Empty weight: 213 kg Tank dimensions: Total width: 1020mm Total length: 1220mm Total height: 1400mm Height of the feet: 100mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Gkedpfx Adou Ngqtjlja Equipment: Type plate: yes Outlet diameter: 40mm Outlet valve: ball valve Distance drain to floor: 265mm

Condition: used, Used stainless steel container / transport container / IBC Last intended use: Pharmaceuticals, cosmetics Article number: 10804 Volume: 1000 liters Type: Standing in galvanized stacking frame Material (in contact with media): 1.4571 / AISI316 Manhole: 400mm Design: Single-walled Operating pressure according to nameplate: ATM Container dimensions: Gedpfx Aev Dt Nnjdlska Total width: 1020mm Total length: 1220mm Total height: 1640mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI 304 Facilities: Nameplate: No Outlet diameter: DN50 Outlet valve: Disc valve Distance from drain to floor: 280mm