11 kW screwcompressor dryer tank

KAESER AIRCENTER SK 22

Condition: good (used), Year of construction: 2020, operating hours: 1,730 h, functionality: fully functional, overall weight: 580 kg, total length: 1,335 mm, total width: 750 mm, total height: 1,880 mm, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 66 dB, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Type: Aircenter SK22 Year of Manufacture: 2020 Condition: Very good, used Run-on hours: 6,000 h Load hours: 1,730 h Maintenance in 2,589 h Technical Specifications Pressure 11 bar Effective free air delivery 1.67 m³/min Rated motor power 11 kW Motor protection class IP 55 Power supply 400 V / 3 Ph / 50 Hz Dimensions (W x D x H) 750 x 1,335 x 1,880 mm Weight 580 kg Air receiver 350 l Compressed air connection G 1 Sound pressure level 66 dB(A) Refrigeration dryer Power consumption 0.49 kW Pressure dew point 3 °C Pressure drop 0.06 bar Refrigerant R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment: EN 60204-1: Yes Redpfxexnnd Dj Aa Eel Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m power cable with 32A plug

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Redpfx Aaodrc Txo Eol Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), Year of construction: 2013, Kaeser screw compressors - various models Rjdpfjqcu Rcjx Aa Esl

Condition: as good as new (ex-display), Year of construction: 2023, The ENR series are air-cooled chillers for industrial use for outdoor installation. The ENR 038 has axial fans, scroll compressors, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum reliability. Internal pump, tank, fan control, low GWP refrigerant R454B. Refrigerating capacity 37 Kw, envious GWP refrigerant R454B Rodpfxefmd Hhe Aa Eel We have a lot of chillers directly from stock available used and new . contact us for a no obligation quote. We rent / sell / and also take over the service for all refrigeration systems Germany-wide.

Year of construction: 2023, operating hours: 1 h, condition: new, Intersonik tunnel type automatic washing machine. You can wash crates, boxes, molds, lids etc. in a continuous and automatic washing machine. Ideal for food industry. Ideal for automotive industry. KLT washing, crate washing, plastic box washing machine, automatic washing machine, spray washing, tunnel washing Redsd Tnuaepfx Aa Eel For further info please contact with us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The GEA CFS Autogrind 280 is a powerful industrial grinder built for high-performance applications, particularly in meat processing. Designed to work with frozen blocks up to -25°C Key Features: Enhanced Power: The 117 kW motor delivers increased grinding performance, enabling faster processing of both frozen and fresh meat blocks. Redpfx Ajvt R A Dja Esl Processes frozen blocks at temperatures as low as -25°C without compromising quality or texture. Suitable for a variety of raw materials, including beef, pork, poultry, and fish. The upgraded motor supports even higher production rates, making it ideal for large-scale industrial use. Features a 280 mm throat with robust cutting plates and knife options to ensure uniform particle size. Suitable for fine or coarse grinding, depending on your needs. Integrated block pusher and feeding system reduce manual labor and improve efficiency. Made from stainless steel for easy cleaning and compliance with stringent hygiene standards. Smooth, crevice-free surfaces minimize contamination risks. Minimizes heat generation during grinding to maintain product integrity and comply with food safety regulations. Safety interlocks and overload protection mechanisms safeguard both the operator and the equipment. Intuitive control panel for easy operation and monitoring. Despite its high power, the design is optimized to consume energy efficiently during continuous operation. Processes frozen and fresh meat for various end products such as: Minced meat Burgers Sausages Nuggets Other meat-based products This model is an excellent choice for high-demand production environments requiring consistent quality and reliability.

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar Rodpfx Aeh A Sfdoa Eel liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features Rjdpfx Aajwfunys Ejl

Condition: good (used), punching force: 70 t, Punchingpower: 70 Ton Punching capacity: Ø 28 in 20 mm steel Throat: 300 mm Cuttingcapacity: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flatsteel 45 mm round bars Notching: 100 x 13 mm Redpfx Aasuby Slj Eol Featured with: - Elektric stop 1000 mm - Various tooling and accesories - 2 Cylinder machine Country of origin: Spain Motor power: 7,5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Rodpfx Ajmgc I Nea Eel Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.