Used Grain Drain for sale (1,431)

Condition: excellent (used), Year of construction: 2025, operating hours: 11 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 11-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Base Year of construction: 2025 Operatin hours: 5 Technical specifications Type: Combi XP 11-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.30 to 2.00 m³/min at 6 bar (g): 0.30 to 1.89 m³/min at 7 bar (g) : 0.30 to 1.78 m³/min at 8 bar (g) : 0.29 to 1.67 m³/min at 9 bar (g) : 0.29 to 1.57 m³/min at 10 bar (g) : 0.29 to 1.46 m³/min at 11 bar (g) : 0.28 to 1.36 m³/min at 12 bar (g) : 0.28 to 1.24 m³/min at 13 bar (g) : 0.27 to 1.17 m³/min Nominal power drive motor: 11 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/60-315/3 V / Hz / ~ Ncsdpfx Agsw Duytewep Compressed air connection: 3/4“ G Length: 1530 mm Width: 700 mm Height: 1640 mm Weight: 590 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2015, No. 10033 Wet drum magnetic separator Steinert WDS 92 92 (without CE package) Used, year of construction 2015 According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Without CE package Highly efficient recovery of FeSi or magnetite from float-sink separation and wet processing of fines The Steinert WDS is particularly popular in the processing of heavy sludge or iron ore with grain sizes between 1 µm and 3 mm. In the regeneration of heavy beet, the wet drum magnetic separator essentially ensures the recovery of magnetite or ferrosilicon (FeSi). High field strengths are achieved through the use of powerful magnets made of neodymium-iron-boron and the special design of the magnet packs, making high separation rates of over 99 % possible. Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Nedpfeyl Sqwex Agwjcp Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, filling amount 250 l basket dimensions 550 x 270 x 75 mm dimensions of the machine ca. 1,25 x 0,85 x 1,24 m Nedjymp R Dspfx Agwscp BALTIC METALL - 6957 Dive Wash Unit - Immersion Tank Dimensions: 595 x 395 x 500 mm - Draining Area Dimensions: 470 x 350 mm - 2x Storage Rack Dimensions: 480 x 360 x 230 mm

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 6-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 6-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.19 to 0.89 m³/min at 6 bar (g): 0.19 to 0.86 m³/min at 7 bar (g) : 0.19 to 0.82 m³/min at 8 bar (g) : 0.18 to 0.78 m³/min at 9 bar (g) : 0.18 to 0.76 m³/min at 10 bar (g) : 0.18 to 0.69 m³/min at 11 bar (g) : 0.18 to 0.67 m³/min at 12 bar (g) : 0.17 to 0.63 m³/min at 13 bar (g) : 0.17 to 0.59 m³/min Nominal power drive motor: 5.5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400 V / 73-290 Hz Compressed air connection: 3/4“ G Length: 1530 mm Width: 640 mm Height: 1520 mm Weight: 470 kg Nsdsx Uqxgjpfx Agwocp Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, maximum load weight: 30,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 09/2025, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,100 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,780 mm, Year of construction: 2022, Equipment: ABS, Used Benalu Tipper Semi-Trailer Sidewall: Smooth-walled with hollow chamber profiles in the longitudinal direction Floor thickness (mm) 5 Sidewall thickness (mm) 3 Universal door with double lock, upper cross member Smooth-walled door leaves Continuous welds on the inside of the door Nedpfxex I Tv Us Agwjcp Locking system: single door/swing flap - pneumatic Grain pusher, right & left Grain outlet (1 piece) Side door bracket, hook 2 bucket holders (outside) Rear stepladder, removable Hyfix Fifth wheel coupling height when loaded (mm) 1170 2" kingpin BPW axles Offset (mm) 120 Disc brake Brake system, EBS Wabco EBS Anti-roll system (Anti-lock braking system) EBS control (Infocentre / Smartboard) Raising and lowering Automatic lowering when Tipping process Quick-release valve during tipping 1st lifting axle: Automatic control Tipping ram, Hyva Tipping angle: 48 degrees Aluminum drop legs Foldable steel underrun protection 24N24S + 15-pin plug connectors Rectangular taillights with bulbs 4 rear white LED work lights - 11W 1 toolbox 2 wheel chocks Insulation between steel and aluminum parts Tires: 6 x 385/65 R 22.5 Speedline satin-finished rims Tarpaulin quick-release fastener WITHOUT side straps Tarpaulin color: Metallic gray (B1070 / B2070) - PVC 650 gr/m²

Condition: used, maximum load weight: 30,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 10/2025, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,100 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,780 mm, Year of construction: 2022, Equipment: ABS, Used Benalu Tipper Semi-Trailer Sidewall: Smooth-walled with hollow chamber profiles in the longitudinal direction Floor thickness (mm) 5 Sidewall thickness (mm) 3 Universal door with double lock, upper cross member Smooth-walled door leaves Continuous welds on the inside of the door Locking system: single door/swing flap - pneumatic Grain pusher, right & left Grain outlet (1 piece) Side door bracket, hook 2 bucket holders (outside) Rear stepladder, removable Hyfix Fifth wheel coupling height when loaded (mm) 1170 2" kingpin BPW axles Offset (mm) 120 Disc brake Brake system, EBS Wabco EBS Anti-roll system (Anti-lock braking system) EBS control (Infocentre / Smartboard) Raising and lowering Automatic lowering when Tipping process Quick-release valve during tipping 1st lifting axle: Automatic control Tipping ram, Hyva Tipping angle: 48 degrees Aluminum drop legs Foldable steel underrun protection Ncedpfeyc Ir Ejx Agwsp 24N24S + 15-pin plug connectors Rectangular taillights with bulbs 4 rear white LED work lights - 11W 1 toolbox 2 wheel chocks Insulation between steel and aluminum parts Tires: 6 x 385/65 R 22.5 Speedline satin-finished rims Tarpaulin quick-release fastener WITHOUT side straps Tarpaulin color: Metallic gray (B1070 / B2070) - PVC 650 gr/m²

Condition: new, Mobile vibratory finishing machine with integrated treatment of process fluids (cascade). Integrated sieve box for separating the workpiece and grinding tools. Compact design for large work containers including soundproofing. Plug & Play system: plug in 230V power and get started. - with sideward drain Ncsdpsg Sr I Hsfx Agwop - gross volume 50 l - net volume 36 l - motor 0.5 kw - inside length of work container 600 mm - inner width work container 275 mm - inside height of work container 325 mm - total length of trolley (A) 1450 mm - trough vibrator removal height (B) 1240 mm - table height trolley (C) 720 mm - width with lid open (D) 1200 mm - width of trolley (E) 730 mm - total height (F) 1400 mm - drive with variable speed control (frequency converter) - process control by timer - customized adjustments (partition walls, different perforations of the sieves for separating the workpieces, etc.)

Condition: used, empty load weight: 5,717 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2020, loading space length: 9,750 mm, loading space width: 2,440 mm, loading space height: 1,900 mm, loading space volume: 44 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2020, mileage: 475,510 km, Equipment: ABS, Unladen weight: 5,717 kg, permissible gross weight: 36,000 kg, loading area (L W H): 9,750 mm x 2,440 mm x 1,900 mm. Tyre size: 385/65 R22.5, loading area volume: 44 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), grain chute, sliding roof tarp, platform, connection plugs 1x15 and 2x7 pin, antispray, light alloy rims. You can find our complete vehicle portfolio at . Interested in financing? With our Value Added Service, we offer you individual financing solutions, full-service and telematics services. We are happy to advise you. Nsdpfx Ajxvfd Dsgwocp

Year of construction: 2019, condition: ready for operation (used), A GKM tumbling screen machine is available. Screen area: 2.6m², diameter: 1900mm, grain size: 1µm-20µm, screening capacity: 1kg-50000kg/h, bulk density range: 20-10000g/l, separation range: 20µm-20 mm, screen decks: 4, speed: 180rpm, height: approx. 1750mm, weight: approx. 1500kg. Documentation available. On-site viewing is possible. Njdoxxl N Eopfx Agwjcp

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Ncjdpfx Agsyt Nvtswop Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change

Condition: new, through-put width 580 mm working heigth 615 mm discs 570 x 260 mm Air consumption 400 l/min. Ncedpfjxaagzox Agwop air pressure 2.7 - 5.5 bar 0 184 Liter 0 Luft .. 3/8 Zoll weight 125 kg range L-W-H ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1220 x 615 x 580 mm (LxWxH) - including sandblasting gun (grain size 0.149 - 0.250 mm can be used) - Including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Instruction manual in German

Condition: new, Year of construction: 2026, Machine type: EVT 400 Manufacturer: ERBA Power kW: 4.0 Total volume: 400 liters Description: The EVT 400 long trough vibratory finishing machine from ERBA features a robust, hot-cast polyurethane lining. Discharge or separation is carried out via a bottom drain (manual/pneumatic). Removable dividers allow the work tank to be partitioned into compartments for individual processing of parts. The machine is equipped with an electrical control cabinet and can be optionally fitted with a fully automatic PLC process control system. Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted via frequency inverter (optional). Nsdpjyq N D Eofx Agwocp As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and freight costs. The photos may show the system including accessories, which are optionally available and subject to additional costs. The quoted price refers to the base machine. The photos are for illustration purposes only. The actual appearance and dimensions may differ from those shown. If you are interested, we look forward to your inquiry. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely to present our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging platform). The first step will be to send you a non-binding offer, which will also include information about our general terms and conditions, legal notice, and right of withdrawal before a purchase/contract is concluded.

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Nedpfxjyrqubs Agwscp

Condition: used, empty load weight: 7,818 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2022, loading space length: 9,795 mm, loading space width: 2,360 mm, loading space height: 2,300 mm, loading space volume: 51 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2022, mileage: 327,395 km, Equipment: ABS, Unladen weight: 7,818 kg, permissible gross weight: 36,000 kg, load compartment (L W H): 9,795 mm x 2,360 mm x 2,300 mm. Tyre size: 385/65 R22.5, load compartment volume: 51 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system (EBS), toolbox, grain chute, roll-over roof tarpaulin, platform, 1x15-pin and 2x7-pin connection plugs, antispray, light alloy wheels. You can find our complete vehicle range at . Interested in financing? With our Value Added Services, we offer you customised financing options, full service, and telematics solutions. We are happy to advise you. Ncjdpfxeyvatuj Agwsp

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results Nsdpfxorr Smls Agwscp - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Year of construction: 2024, operating hours: 1,226 h, condition: used, functionality: fully functional, machine/vehicle number: G22SJ24083161375, ATTENTION – FACTORY WARRANTY UNTIL 08-2026!!!!! The iCombiPro is the latest combi-steamer from RATIONAL. The iCombiPro 20-2/1 Gas model with 20 GN 2/1 or 40 GN 1/1 slots is easy to operate even for unskilled personnel, allowing you to achieve outstanding food quality without the need for constant supervision. The unit has been inspected and tested by our in-house specialist workshop and is fully functional. Original list price (gross RRP): €49,182.70 These are recent original photos of the item. The combi-steamer is available immediately. You will receive an invoice with VAT shown. Condition: Used, inspected and fully functional Technical data: - W x D x H: 1082 x 1117 x 1872 mm - Minimum door opening for transport (W x H): 1200 x 1900 mm - Serial number: G22SJ24083161375 - Year of manufacture: 2024 - Max. load per tray: 5 kg - Max. total load: 100 kg - Weight (gas model): 358 kg - Electrical connection: • Voltage: 1 NAC 230 V • Gas rating: 80 kW • Fuse: 16 A - Water connection: • Inlet (pressure hose): 3/4 inch • Drain: DN 50 Further specifications: - Temperature range: 30°C to 300°C - Senses actual cooking chamber conditions - Detects tray size, load amount and product condition, calculates browning automatically - Learns commonly used cooking routines and replicates them - Determines the ideal cooking path for the desired result - MyDisplay – user-adjustable, personalized operation display - TFT color display and touchscreen - Operating and user manual accessible on device display - Core temperature probe with automatic error correction in case of incorrect insertion and positioning assistance - Glass door compartment for energy efficiency - LED interior lighting - Includes energy consumption display - Humidity control: precise moisture measurement and adjustment by percentage - Individual programming for at least 350 cooking programs with up to 12 steps each - Adjustable steam injection in 3 levels - USB interface - High-performance fresh steam generator with automatic descaling - 5 programmable air speeds - Integrated, maintenance-free grease separation system without additional grease filter - Cool-down function: rapid chamber cooling - Automatic adaptation to installation location (altitude, climate, etc.) Ncodpfx Ajymmi Rjgwop - Appliance door with ventilated triple-glazed pane and swiveling inner pane - Fixed drain connection compliant with SVGW - Splash and jet water protection IP X 5 - Separate solenoid valves for soft and hot water up to +30°C - Automatic start time pre-selection – set by date and time - Interior and exterior made of stainless steel DIN 1.4301 - Integrated WiFi module Our service for you: - FACTORY WARRANTY UNTIL 08-2026!!!!! - High-quality branded equipment at fair prices - Professional and competent advice – before and after your purchase - Flexible choice of shipping or self-collection - Provision of user manuals, wiring diagrams & spare parts - Trade-in of your combi-steamer from model year 2004 onwards - Complete range of accessories at attractive prices - The iCombi Pro from Rational sets a new standard for intelligence, efficiency & flexibility.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB AUTO compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Nsdpfx Agec Spguewecp Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Nodpfx Aozdr Togwecp Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert AUTO compaction cycles Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Press, Barrel Compactor for Metal drums / Plastic drums

Condition: used, mileage: 327,000 km, power: 345 kW (469.07 HP), first registration: 03/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2025, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, VOLVO FH 460 I SAVE GRAIN TIPPER ALCOA LIFT AXLE WITH KEMPF TRAILER ----VEHICLE HISTORY * FROM 1ST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT * AUTOMATIC TRANSMISSION * PTO (POWER TAKE-OFF) * ENGINE BRAKE * CRUISE CONTROL * ADAPTIVE CRUISE CONTROL (ACC) * LANE ASSIST * ACTIVE BRAKE SYSTEM * AIR CONDITIONING * AUXILIARY HEATER * LIFT AXLE * ALCOA ALUMINUM WHEELS * ON-BOARD COMPUTER / NAVIGATION * REFRIGERATOR * 1 BED * COMFORT SEATS & SEAT HEATING * FULL AIR SUSPENSION * ROOF SPOTLIGHTS * KEMPF BODY * TRAILER COUPLING * 1 FUEL TANK * ADBLUE * TOOL BOX * GVW (PERMISSIBLE TOTAL WEIGHT): 26,000 KG * UNLADEN WEIGHT: 11,050 KG * PAYLOAD: 14,950 KG * TIRE SIZE: Ncjdowg Nqrepfx Agwjp * 1ST & 3RD AXLE: 385/55R22.5 * 2ND AXLE: 315/70R22.5 * GOOD TIRES * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----CUSTOMS EXPORT DECLARATION EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5, 15, 30-DAY PLATES AND 15-DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be required (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied) Subject to changes, errors, and prior sale! You can find more vehicles on our website Sale is carried out exclusively under our General Terms and Conditions – see website Important note – important information: Despite careful verification of all details in our offer, errors may occur. Some may be caused by transmission errors in the systems of various platform providers. Therefore, please note that all details are provided without guarantee and do not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as pre-contractual information. The details provided here are not guaranteed and do not constitute warranted characteristics.

Condition: used, maximum load weight: 14,520 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 02/2021, next inspection (TÜV): 06/2025, Equipment: ABS, KEMPF TIPPING TRAILER GRAIN TIPPER SAF AXLES LIFT AXLE ALCOA? ----VEHICLE HISTORY * FROM FIRST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * TYPE: THKD 18-P * FIRST REGISTRATION: 23.02.2021 * DISC BRAKES Ncsdpfx Aex Hm Afegwop * SAF AXLES * LIFT AXLE * ALCOA ALUMINUM RIMS * AIR SUSPENSION * ROLL TARPAULIN * ABS * HARDOX FLOOR 5 MM * Dimensions: 5,200 x 2,450 x 900 mm * PERMISSIBLE GROSS WEIGHT: 18,000 KG * UNLADEN WEIGHT: 4,480 KG * PAYLOAD: 13,520 KG * TIRE SIZE: 385 / 65 R22.5 * GOOD TIRES * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5, 15, or 30-DAY PLATES AND 15-DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS EXCLUSIVELY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least €500 / €1,000 will be required. Subject to prior sale, errors, and modifications! You can find more vehicles on our website. Sales exclusively according to our terms and conditions – see homepage. Important notice: Despite careful verification of all details in our offer, errors may occur. Some may arise from transmission errors in the systems of various platform providers. Therefore, we highlight that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute a binding offer within the meaning of §145 BGB. Rather, it is non-binding information intended for contract initiation. The information provided does not represent guaranteed features and is offered without liability.

Year of construction: 2026, condition: like new (used), Binder dispenser / lime spreader, used for a short-term rental. The dispenser features an integrated weighing system with display; the 18V battery system is from Makita and is thus independent of any external power source. An OilQuick 70/55 adapter plate is installed but can be changed if required. Feel free to contact me with any questions. Best regards, Jürgen Wolf. Suitable for excavators from 15 t. Required drain line: 0. Nodpfx Agjyupynowscp

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm Ncsdpfxewhp Dze Agwep - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Njdjt Tqy Espfx Agwjcp Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, empty load weight: 9,757 kg, maximum load weight: 32,243 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 13,127 mm, loading space width: 2,325 mm, loading space height: 2,755 mm, total length: 25,500 mm, total width: 39,570 mm, total height: 138,420 mm, suspension: air, tire size: 385/55 R 22.5, Year of construction: 2025, mileage: 1 km, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, color black, air suspension with lift axle, grain chute, lifting and lowering function, tipping body (dumper), lift axle on 1st and 3rd axle, roll tarpaulin, disc brakes, fixed side underrun protection, steel body, 1 storage box, foldable rear underrun protection, Duomatic coupling, load gauge, 2x 7-pin + 15-pin power connectors, working platform, Wabco SmartBoard, side LED work lights, pneumatic remote release, pneumatically foldable rear underrun protection, automatic lowering when tipping, Alcoa Dura-Bright wheels, single-wheel mudguards, broom and shovel holder, 2x LED reversing lights, aluminum ladder. Nsdpoydfvqefx Agwscp

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Drum velocity: 6500 rpm Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Height: 1470 mm Weight: 1200 kg Ncsdpjyr Ic Njfx Agwop Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge