Tipper van

Mitsubishi Canter Fuso 7C15 4x2, Tele-Absetzer, Vereiterbar

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Kjdpfoyidvdox Aldsnb Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, – Saw blade, 400 mm – Double miter saw – 2 pneumatic clamps – Mist lubrication system – Blow gun – Protective cover Kodpfx Asgg N Drsldjnb – Documentation – 400 V

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK 2T gantry crane is a robust and reliable industrial machine designed for intensive operation in production halls, workshops, warehouses, and other industrial facilities. With a load capacity of up to 2000 kg, a durable construction, and a mobile frame equipped with swivel castors, it enables safe and precise lifting and transport of heavy structural elements, machinery, and materials. Main Features and Advantages 2-ton load capacity – ideal for lifting heavy loads in industrial applications. Adjustable working height from 2400 to 3600 mm – allows adaptation to different types of facilities and projects. Double T-type supporting beam (100 x 180 mm) – increased stability and the possibility of installing chain or wire rope hoists. Mobility – four swivel castors with parking brakes ensure easy movement and secure positioning at the workplace. High torsional resistance – reinforced steel construction with additional supports ensures rigidity under load. Safe height adjustment – carried out using a lever and two locking screws on each support. Professional Industrial Construction Knsdpsridh Njfx Aldjb The CORMAK 2T model was designed with efficiency, durability, and safety in mind. The construction based on a double T-type load beam allows the installation of various lifting accessories, including chain hoists and electric winches. Durable travelling wheels ensure quiet and smooth operation even under maximum load, while parking brakes guarantee stability during loading, assembly, and maintenance operations. The gantry crane can be quickly moved along the designated working area or relocated to another part of the facility. Thanks to its high mobility and structural rigidity, it is suitable for many industries, including heavy industry, construction, repair workshops, and logistics centres. Versatility and Upgrade Options The crane can be equipped with additional accessories such as pulley blocks, chain hoists, or wire rope hoists, allowing more precise and controlled handling of loads. It is ideal for tasks such as: Loading and unloading machinery and industrial components Assembly of steel and structural elements Moving heavy parts in repair workshops Service, maintenance, and assembly work in construction applications Standard Equipment Steel frame with adjustable height Double T-type supporting beam: 100 x 180 mm 4 swivel travelling castors with brakes Robust supports with safety locking system Reinforced torsion-resistant construction A Professional Solution for Your Facility The CORMAK 2T gantry crane guarantees reliability and safety when working with heavy loads. It is an investment that improves efficiency and precision in applications where standard lifting solutions are insufficient. The possibility of adding lifting accessories allows the machine to be easily adapted to specific production, maintenance, or assembly requirements. Note: The gantry crane is sold without a hoist – photos are for illustration purposes only. Technical Specifications Parameter Value Load capacity 2000 kg Double T-type supporting beam 100 x 180 mm Height adjustment range 2400–3600 mm Overall width 2360 mm Weight 168 kg

Condition: new, Year of construction: 2025, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 55 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 5L (approx. 3kg powder); power supply and consumption: 220V, 1.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L1900xW1118xH2524mm; weight: 800 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Knjdpfx Aljv Nkzxedob Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, Sweeper-scrubber machine Technical condition: good Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear: 1 x bandage wheel; Power steering; Front windshield; 2 x front/ StVZO-like AS; Overall height ready to operate: 2300 mm Knsdpjukrcpsfx Aldsb

Condition: used, Cutting width: 430 mm Cutting speed: 24 m/min Maximum throughput height: 90 mm Blade gap: 0 - 5 mm Apply length on infeed conveyor: 400 mm Infeed conveyor: 850 x 425 mm Discharge conveyor: 650 x 425 mm Overall dimension W x H x D (with/without discharge conveyor): 800 x 1190 x 1660 / 1210 mm Weight (with/without discharge conveyor): 225 / 210 kg Motor performance: 0.75 kW Electrical connection: 3 AC - 400 V - 50 Hz, 16 A Kjdot Uqbfopfx Aldsnb Compressed air: not required

Year of construction: 2025, condition: new, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 10L (approx. 6kg powder); power supply and consumption: 220V, 7.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L3420xW2200xH2688mm; weight: 900 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Knjdsv Nkz Espfx Aldob

Condition: new, Tube cutting aluminum circular saw / Undercut saw AC 550 Special equipment included in the price: Pneumatic vertical and horizontal clamping using 4 clamping supports Infinitely adjustable feed rate of the saw blade Minimum quantity lubrication 3m roller conveyor Description Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting range 90° rectangular: 260 x 200 mm Cutting range 90° square: 155 x 155 mm Cutting range 45° rectangular: 180 x 200 mm Cutting range 45° square: 130 x 130 mm Operating pressure: 6 - 8 bar Knsdpfx Ajkckx Uoldob Operating voltage: 380 V Total power consumption: 3 kW Machine weight: approx. 250 kg

Condition: used, mileage: 248,935 km, power: 77 kW (104.69 HP), first registration: 08/1995, fuel type: diesel, overall weight: 6,600 kg, next inspection (TÜV): 05/2022, color: green, gearing type: mechanical, emission class: euro2, number of seats: 3, loading space volume: 3 m³, loading space length: 4,000 mm, loading space width: 2,200 mm, loading space height: 350 mm, * Analog speedometer * mirror heating * Fog lights * Roof hatch * Rear window * Driver's swing seat * Passenger seat bench * Diff. lock rear axle * Trailer coupling * Ball head coupling Knsdsvi Tykepfx Aldsb * 5-speed * Suspension: leaf * Payload: 3185 ----Body: Meiller 3-sided steel, raised bulkhead, lashing eyes. Sale only to tradesmen. FOR EXPORT ONLY THE NET PRICE IS TO BE PAID !!!!! ALL SPECIFICATIONS WITHOUT GUARANTEE INS. All sales contracts, invoices, pro forma invoices, orders and sales talks are based on our general terms and conditions (see imprint).

Condition: used, Year of construction: 2025, operating hours: 14 h, functionality: fully functional, Powerful ride-on sweeper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 13h Knodpfswh Rd Nsx Aldob Year of manufacture: 2025 SCHORR Ride-on Sweeper, Electric Sweeper, Street Sweeper, Floor Sweeper Powerful and smooth-running sweeper for indoor and outdoor use. With switchable spray nozzle. The ride-on sweeper offers a comfortable and efficient solution for floor cleaning. The ergonomic seat and intuitive controls allow effortless operation, even over extended periods. The powerful motor ensures thorough cleaning even in challenging conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of comfort and efficiency makes floor cleaning a stress-free and enjoyable task. The standard LED work lights facilitate working in darker areas. With an output of 1920 watts from 48V, the sweeper is equipped with enough power to comfortably provide over 4 hours of continuous use. SCHORR Ride-On Sweeper RR80KM – Discover the advantages: -- Fully electric ride-on sweeper with a 1250mm working width – ideal for large indoor and outdoor areas -- 48V/1920W power -- 80-liter bagless rear-mounted collection container, easily extendable and emptied -- Powerful system with 48V and 58Ah -- With switchable spray nozzle for less dust stirring -- Extremely easy to operate -- Outstanding maneuverability Technical specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR80KM Drive: Seat Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tires: PU (non-slip) Weight: 400kg Basic dimensions Collection container volume: 80L Fresh water tank volume: 10L Main brush diameter: 500mm Total length: 1600mm Total height: 1300mm Total width: 1250mm Sweeper width (without brush): approx. 80cm *Further technical specifications are available upon request. The chassis is made entirely of flexible and robust plastic, which reduces potential damage to walls, for example. Except for the side brushes, nothing protrudes beyond the casing, allowing you to work as close to objects as possible. The collection container is made of solid steel and can be easily removed from the rear of the machine. Sensitive components such as the headlights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and providing advice.