Used Glass Drilling Machine for sale (67,689)

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 32 mm throat 245 mm bore stroke 135 mm spindle taper MT 3 table-size 410 x 380 mm spindle turning speed range 10 - 2.100 U/min voltage 400 V total power requirement 1,1 kW weight of the machine ca. 210 kg Godpswlvk Nofx Acmskd dimensions of the machine ca. 0,7 x 1,8 x 1,75 m - Threading device - Machine vice 150 mm - Drill cassette 9-piece 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: good (used), Year of construction: 1998, machine/vehicle number: 010007, Offer 26345 Technical data: Gjdpfx Ae Ai Trfecmjkd - Drilling capacity in ST 37 steel up to 25 mm - Thread cutting - Drill spindle connection with cap nut MK 3 - 6 drill spindle speeds 95 - 1600 rpm - Right-hand / left-hand rotation - Drilling unit can be adjusted in height using a hand crank - Maximum distance between table and drilling/milling spindle 450 mm - Drill spindle stroke with fine feed via handwheel 120 mm - Drill spindle overhang 250 mm - Drilling/milling unit can be swiveled 45° to the left and right - Coordinate table with 3 T-slots 720 x 210 mm - Table travel X-axis 500 mm / Y-axis 230 mm - Drive 400 V / 0.7 kW - Space requirement approx. W 1100 x H 2100 x D 950 mm - Weight approx. 300 kg - Includes: - Emergency stop button - Machine vice - Various milling cutters, various collets

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications due to pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily realized thanks to the rotatable drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Gjdpfxjyfta Te Acmskd Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching is then done pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be placed on the table at the front and rear 2 swivel workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swivel elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Used pillar drill press from IMA Gsdpfx Aoz H U Tyecmokd Type IG 30-8 Capacity 30 mm

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Gkjdpfjy D Hr Uex Acmed Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: used, total width: 1,300 mm, total length: 1,750 mm, total height: 2,400 mm, Colour: Grey Empty weight: 2.000 kg Gkedpfx Acszrgc Hjmsd - Serial number: 955 - Drive system: Conventional - Arm length [mm]: 1570 - Y-axis travel [mm]: 1320 - Table length [mm]: 650 - Table width [mm]: 1300 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 0 - Min. Reach [mm]: 300 - Max. Reach [mm]: 1100 - Tool holder: MK4 - Min. spindle speed [rpm]: 102 - Max. spindle speed [rpm]: 2000 - Options: Drill unit feed, Tapping function, Clamping block - Transport dimensions: 1750mm x 1300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, New UWM drilling and milling machine Type: 40A Drilling capacity up to: 40 mm Gods Aazzdopfx Acmokd

Condition: used, Year of construction: 1984, Used Machine Year of Manufacture: 1984 Features and Technical Specifications: Godpfx Aozk Nuvocmskd Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gear motor: 2.2 kW with 21 spindles Spindle pitch: 32 mm with built-in oil damping Height adjustment: 80 mm Drilling depth: 80 mm Dimensions: 140x88x160 Weight: 420 kg

Condition: good (used), bore capacity in steel (diameter) 32 mm throat 310 mm bore stroke 175 mm spindle taper MT MK3 table-size 570 x 475 mm spindle turning speed - stepless 60 - 1600 U/min voltage 400 V column diameter Ø145 mm Gkodjy Aytiepfx Acmsd quill feed 0,1-0,16-0,25 mm/U total power requirement 1,1/1,8 kW weight of the machine ca. 450 kg dimensions of the machine ca. 0,70 x 1,10 x 2,10 m - Serial-No.: 121950 - Stepless speed control - Automatic vertical feed - Built-in machine light

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Gsdpjxnlfljfx Acmekd

Condition: new, Drilling capacity ----- 50 mm Tapping capacity ----- M33 Motor ----- 3 kW Speed range ----- 55 ~ 1450 rpm Spindle stroke ----- 210 mm Spindle taper ----- MK4 Automatic spindle feed ----- 0.1 / 0.2 / 0.3 / 0.4 mm/rev Gkjdpfega T H Ijx Acmod Drilling table ----- 580 x 580 mm Base ----- 860 x 580 mm Overhang ----- 375 mm Column diameter ----- 180 mm Maximum distance spindle - table ----- 800 mm Maximum distance spindle - base ----- 1325 mm Weight ----- 860 KG INCLUDED * Motorized table adjustment * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor * CE plug * Case with various tools

Condition: used, 4-head spindle paper drilling Josef Foellmer IRAM 200 4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200 Year ca. 1984 - Serial-No. 106 Drilling area 3 - 10 mm Drilling distance variabel 36 - 430 mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Godpfe Agpy Uox Acmskd On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 40 mm arm length: 1000 mm workpiece height max.: 1420 mm column diameter: 350 mm bore capacity in cast iron: 50 mm vertical adjustment of the arm: 575 mm spindle taper MT: MK 5 bore spindle stroke: 325 mm number of revolutions per minute of drill spindle:: 40 - 1700 /12 steps U/min feed range - spindle: 0,12 - 1,2 mm/U arm: 1075 mm distance drilling head - clamping area: 1250 mm table surface area: 750 x 750 mm total power requirement: 3,6/4,5 kW dimensions L x W x H: 2,2 x 0,9 x 2,82 m weight of the machine ca.: 2,9 t The machine features a solid radial arm that can swivel around the column, with a horizontally adjustable drill head and motorized arm height adjustment. The mechanical spindle speed and feed settings allow adaptation to different machining requirements. The equipment includes automatic spindle feed, hydraulic clamping functions and a heavy-duty box-type clamping table with T-slots, measuring 750 × 750 × 500 mm. The heavy-duty machine construction provides a stable foundation for machining larger and heavier workpieces. The adjustable radial arm allows different drilling positions to be reached without constantly repositioning the workpiece. Equipment and Features: ·Conventional machine operation ·Heavy-duty swivelling radial arm ·Horizontally adjustable drill head ·Motorized radial arm height adjustment ·Mechanical spindle speed and feed adjustment ·Automatic spindle feed ·Hydraulic clamping functions ·Box-type clamping table with T-slots, 750 × 750 × 500 mm Godpo Ahmv Refx Acmskd ·Robust industrial design *

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units - 2 vertical units - 4 front-mounted units (two on each side) Gsdpfx Aoxrmptjcmskd

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Gkodez Ii Tdopfx Acmjd Main motor power: 37 kW Travel in X-axis: 4000 mm Travel in Y-axis: 2500 mm Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Rapid traverse rates: 20 m/min Rotary table: 1800 x 1800 mm Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Universal milling head - manual

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 45-1750 U/min 615 x 470 mm total power requirement 2,2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 0,8 x2,15 m Equipment: - Robust pillar drilling machine - Infinitely variable speed adjustment (V-belt) - Thread-cutting device - Automatic spindle feed - With electromagnetic engagement - Multi-speed (pole-changing) motor - Clockwise/counter-clockwise spindle rotation Gksdpfx Acj Ahzidjmjd - Drilling depth stop - Machine table with 2 T-slots - Height-adjustable via hand crank - Coolant system - Machine vise - Emergency stop

Condition: new, Drill and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer includes an equipment package. The following items and options are already included in the price: - Drill and milling machine OPTImill MB 4 Optimum Gkodpfxju R Tfte Acmjd - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - Shank milling cutter set HSS, 20-piece, OPTIMUM - Precision machine vise FMS 100 Optimum - New exhibition machine -

Condition: excellent (used), Year of construction: 2014, Axle: 920 mm X-axis: 3000 mm Material thickness: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: available at warehouse 54634 Bitburg - immediately available - Gksdpfx Acsfmdcqsmed

Condition: used, machine/vehicle number: 9125044, with clamping cube, size: approx. 650 x 500 x 500 mm, overhang: approx. 1000 mm. Gkedpfx Acj Af Nkdemod

Condition: excellent (used), Inline drilling machine Manufacturer: Ixion Type: 3 R 15 3 consisting of a tapping machine BT15GL Tapping capacity up to M16 8 tapping chucks Pitch: Godpfjzdp U Nex Acmskd 0.4 - 0.5 - 0.7 - 0.8 - 1 - 1.25 - 1.5 - 1.75 Drilling machine BT 15 P MK2 10 speeds, 240 - 3800 rpm and drilling machine BT 15 5 speeds, 480 - 3800 rpm Length: 980 mm Width: 660 mm Height: 1600 mm Weight: 420 kg

Condition: used, Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: Gkjdpfx Acjzryr Usmjd - Working width: 720 mm - Max. clearance: 820 mm - Drilling depth, vertical: 45 mm - Drilling depth, horizontal: 120 mm

Condition: new, Year of construction: 2026, Power: 1.1 kW Drilling capacity in steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: continuously variable, 120 - 3000 min⁻¹ Gkodpfjzhm D Ajx Acmod Spindle mount: MK-4 Drilling stroke: 120 mm Spindle overhang: 254 mm Table size: 475 mm x 425 mm Tilting/rotating of the drilling table: 45° to the left / 360° Column diameter: 80 mm Quick-change toolholder: 1 - 16 mm Weight: 132 kg

Condition: good (used), Year of construction: 2009, bore capacity in steel (diameter) 40.0 mm thread cutting attachment M 30 spindle taper MT 4 MK table surface area 1200 x 500 mm turning speeds 50 - 2000 U/min arm length 1050 mm column diameter 220 mm spindle stroke - max. 200 mm feed range 0.08 - 0.50 mm/U distance spindle /table 760 mm weight 2740 kg range L-W-H 2450 x 2450 x 2800 mm Original price approx. 20.000 Euros Special price on request Equipment: - Robust electro-hydraulic radial drilling machine Gkedpez R D Icsfx Acmed - Sturdy construction ensures vibration-free operation - Compact design with electro-hydraulic quick-clamping system - Infinitely variable speed adjustment (50–316 + 316–2000 rpm) - Digital speed display - Motorized height adjustment of the drill head - Drill head swivels 180° - Arm movable forwards/backwards and swivels horizontally - Clockwise/counter-clockwise spindle rotation - Manual & automatic spindle feed - Large work table with 3 T-slots - 1x heavy-duty machine vice * STANKO IMPORT "200-0225C" * Jaw width: 250 mm * Jaw height: 60.0 mm * Opening width: approx. 300 mm - Thread-cutting attachment - Separate coolant system - Front-mounted emergency stop button - T-slots for mounting on the side and rear of the machine - Operating manual

Condition: good (used), Year of construction: 2005, Offer 26119 Technical data: - Drilling capacity in steel ST 60: up to 30 mm - Drill spindle mount: MK 3 - Drill spindle stroke: 125 mm Gksdpfxsy D Nxqe Acmed - Continuously variable drill spindle speeds: 80 - 3200 rpm - Thread cutting capability through right/left rotation up to M 20 - Overhang: 260 mm - Max. distance between table and drill spindle: 825 mm - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement: approx. W 500 x H 1900 x D 950 mm - Weight: approx. 230 kg - Cross table with handwheels

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, spindle mount: MK 3, total width: 600 mm, total length: 900 mm, total height: 1,900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, spindle stroke: 150 mm, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Overall good condition. Contact us for shipping possibilities! € 2,350.00 Gkedpfswy Ec Djx Acmsd