Used Gildeimeister Speed 32 for sale (39,284)

Condition: excellent (used), Year of construction: 2008, volume flow: 2.61 m³/h, pressure (min.): 11 bar, KAESER ASD 32 screw compressor Motor: 18.5 kW Djdpfx Aez Nz Uqsb Aekw Capacity: 2.61 m³/min Pressure: 11 bar COMPRESSOR IN FULLY OPERATIONAL CONDITION.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Dedez Ag Anepfx Ab Ajkw Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Year of construction: 2011, condition: excellent (used), FEMIA bean calibrator, unused (new). Dsdjwykpcepfx Ab Ajkw

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A Dkedpfx Abefitfls Ajw -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 with SK40-S20x2, suitable for DECKEL milling machine FP1, FP2, FP3, or FP4 Maximum speed: 6000 rpm at 70% duty cycle Dsdpfefxg T Uox Ab Askw Gear ratio: 1:6 Power transmission: up to 2.5 kW Overhang: 110 mm (machine spindle to clamping nut) Tool holder: SK 40 - S20x2 Collets: Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm in a wooden storage box The head is equipped with bronze gears for high torque. Weight: 5 kg Total weight: 9.4 kg in good condition

Condition: used, Measuring device for speed or frequency -Type: 0516 4750 Dkedpfjb Itfdex Ab Asw -Dimensions: 420/320/H90 mm -Weight: 3 kg

Condition: excellent (used), High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz Ovp Dkodpfx Absb Nkuho Aew -Type: 6ES5 385-8MB11 -Number: 3x High Speed Counter available -Price: per package -Dimensions box: 140/110/H60 mm -Weight: 0.3 kg/piece

Condition: good (used), Gear motor, electric motor -Speed: 32/65 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece Dkedpfscpg Hnox Ab Ajw -Number: 5x available -Dimensions: 560/250/H220 mm -Weight: 32 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 9 drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Quantity: 2 pieces available -Price: per piece Dkedpfx Asb A R R Tjb Ajw -Dimensions: 310/60/H135 mm -Weight: 8 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox Dedpfx Abob A R E No Aokw -Number: max. 9 drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 75/290/H90 mm -Weight: 4 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 5x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm Djdpfxeb A R Hij Ab Ajkw -Dimensions: 195/75/H90 mm -Weight: 3 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 5x drill bits -Recording: M8 -right/left: rotating alternately Dkedpfx Ajb A R Ibob Aow -Drill bit spacing: 32 mm -Number: 7 drill heads available -Price: per piece -Dimensions: 190/75/H90 mm -Weight: 3 kg/piece

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 2x drill bits -Recording: M8 Dkedjb A R Iispfx Ab Ajw -right/left: rotating alternately -Drill bit spacing: 32 mm -Quantity: 1 piece available -Dimensions: 90/60/H130 mm -Weight: 2 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32/58 mm -Dimensions: 170/90/H100 mm Djdpfx Absb A R Ilj Aekw -Weight: 4 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 10x drill bits Dksdpfjb A R Rwox Ab Aow -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 350/95/H85 mm -Weight: 8 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 Dkedob A R R Aepfx Ab Aow -right/left: rotating alternately -Drill bit spacing: 32 mm -Number: 1x drill heads available Price: per piece -Dimensions: 140/75/H95 mm -Weight: 3 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 4x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Drill bit spacing: 15 mm -Number: 2 drill heads available Dedpob A R R Hefx Ab Ajkw Price: per piece -Dimensions: 200/75/H90 mm -Weight: 3 kg

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Dkjdpfoikvcaox Ab Ajw Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: SAF 32 DTZ1D2BMG/Z -Speed: 55 rpm Dkodsivfgqepfx Ab Ajw -Power: 0.55kW -Hollow shaft: hexagon 24 mm, length 120 mm -Protection class: IP54 -Brake: 2.5 Nm -Dimensions: 410/200/H150 mm -Weight: 18 kg.

Condition: good (used), Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 8-32 mm -Load capacity: 8 t -Quantity: 1x clamps available Dksdpfsp A A Rvox Ab Ajw -Dimensions: 275/80/H300 mm -Weight: 30 kg

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dedpfx Absuqdhwj Aekw Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: used, quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder Dksdeuypzijpfx Ab Aow -Quick-change tool holder: Quick-change boring bar holder -Recording dimensions: see photos -Number: 2x steel holders available -Price: per piece -Dimensions: 115/55/H130 mm -Weight: 1.5 kg/piece

Condition: used, Year of construction: 2012, operating hours: 43,373 h, machine/vehicle number: TP116, Used Cap Applicator – Overview This used cap applicator, manufactured by Tetrapak, is designed for high-speed application of plastic screw caps onto carton packages in industrial packaging and beverage production environments. The Cap 30 Speed model supports efficient cap application at up to 12,000 caps per hour, making it a reliable choice for a second hand or used bottling line where consistent throughput and precise cap placement are critical. It is well suited for integration into modern packaging machinery setups and can operate as part of a larger used bottling line for beverage production. Engineered for accuracy and repeatability, the machine is compatible with Helicap 23 closures, commonly used in carton packaging applications. Its robust construction and proven Tetrapak engineering ensure stable performance for producers seeking to optimize industrial packaging efficiency without compromising quality. With testing available, this unit offers confidence in readiness and operational reliability. Technical Specifications & Performance Data Manufacturer: Tetrapak Model: Cap 30 Speed Alternate reference: Cap30 Speed Year: 2012 Production speed: up to 12,000 caps/hour Cap system: Helicap 23 (plastic screw cap) Cap size: 23mm Container type: Carton packages Advanced Automation & Control Systems The Cap 30 Speed is built for dependable, automated operation within demanding production schedules. Typical features include an intuitive operator interface for quick setup and monitoring, integrated safety logic, and precise actuation for consistent cap positioning. Designed for high uptime, the machine supports streamlined changeovers and consistent application pressure, helping maintain output quality and reduce stoppages across extended shifts in beverage production. Production Line Integration Capabilities This cap applicator integrates efficiently into upstream and downstream equipment within a used bottling line or complete packaging system. It can be configured for inline operation with conveyors and synchronization signals for smooth product flow. The Helicap 23 compatibility supports widely used carton formats, making it a strong fit for industrial packaging lines that require dependable throughputs and minimal bottlenecks. Its footprint and connection points are suitable for common layout configurations, and it can operate as a standalone station or as part of a synchronized multi-machine line. Machine Condition & Maintenance History The applicator is available with the possibility to test the machine, indicating readiness for operation and providing assurance of functional performance. As a second hand solution, it represents a cost-effective option for facilities seeking dependable capping capability with verifiable operation prior to installation. Operational Performance & Versatility At 12,000 caps per hour, the machine delivers consistent performance for high-volume carton capping in beverage production. Helicap 23 compatibility ensures secure, repeatable application of plastic screw caps. Its stable mechanical design and precise application mechanism help maintain package integrity, reduce rejec... Djdpfxex H Tc Eo Ab Askw

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/95/H70 mm Dsdsx Icztopfx Ab Aekw -Total weight: 4.4 kg

Condition: used, mileage: 201,710 km, power: 150 kW (203.94 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,400 mm, first registration: 03/2021, loading space volume: 4 m³, fuel tank capacity: 70 l, CO₂ emissions: 199 g/km, color: black, number of seats: 5, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, traction control, = Additional Options and Accessories = - Executive Plus package (DAB receiver, tire pressure monitoring system) - Height-adjustable driver's seat - Height-adjustable driver's seat - Comfort seats - LED lighting package (LED headlights, LED daytime running lights) - Leather steering wheel - Alloy wheels (17") - Lumbar support - Multifunctional steering wheel - Navigation package (Apple CarPlay + Android Auto, connected services) - Rear parking sensors - Sliding door, left side - Sliding door, right side - Driver alertness system - Automatic low beam headlights - Automatically dimming interior rearview mirror - Heated exterior mirrors - Front passenger airbag - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Tinted glass - Hill-hold control - Cornering light - Front center armrest - Multimedia capable - Fog lights - Rain sensor - Rear windshield wiper - Start/Stop system - Bumpers in body color - System for preventing secondary collisions - Phone with Bluetooth - Adjustable steering wheel - Heated windshield = Additional Information = General Information Dkedpfjyxdvtox Ab Aow Number of doors: 5 Model year: 2019 Model code: T6.1 Cab: double cab Technical Information Torque: 450 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Transmission: 7 gears, automatic Top speed: 203 km/h Dimensions Length/Height: L2H1 Dimensions (L x W): 530 x 190 cm Weights Unladen weight: 2,074 kg Payload: 726 kg GVWR: 2,800 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior: black Environment and Consumption Average fuel consumption (WLTP): 6.5 l/100km CO₂ emissions (WLTP): 199 g/km Emissions class: Euro 6d-TEMP Maintenance, History, and Condition APK (Technical Inspection): valid until 03/2027 Number of keys: 2 (2 remote controls) Product Safety EU responsible: Volkswagen AG Berliner Ring 2 38440 Wolfsburg, DE