Used Genome Sequencer for sale (361)

Condition: used, This listing is for a Qiagen PyroMark Q24 Advanced Sequencer For advanced methylation and mutation quantification in long sequence runs using Pyrosequencing Advanced technology, software, and chemistry for long sequence runs Quantitative methylation analysis at consecutive CpG or CpN sites Improved quantification of sequence variations at any sequence position Easy and improved base calling functionality Assay versatility on the same instrument and in the same run PyroMark Q24 Advanced has improved Pyrosequencing technology to provide even better real-time sequence-based detection and quantification than before. PyroMark Q24 Advanced features advanced technology, software, and chemistry, and is highly suited for analyzing any kind of sequence variation, particularly DNA methylation at CpG or CpN sites, complex mutations, or for de novo sequencing applications such as microbial typing. Can be refurbished on request, refurbishment not included in price. Pedjxzh Suspfx Ahlspt

Condition: used, This listing is for Roche GS Junior 454 Sequencer Genome Sequencing Unit Ppodpsxzh Szefx Ahlot

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Pjdpjxqnvrsfx Ahlspt Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, functionality: unexamined, Ferwood Code: RU0010016 - Manufacturer Code: 2-083-02-7816 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Pedpfxjwtgb Uo Ahlopt

Condition: used, This listing is for the AATI Fragment Analyser capillary electrophoresis system The unit is in full working condition and is ready for immediate use The AATI Fragment Analyzer is an advanced automated capillary electrophoresis system designed for precise analysis of DNA and RNA fragments. Developed by Advanced Analytical Technologies Inc. (AATI), the instrument provides high-resolution sizing, quantification, and quality assessment of nucleic acid samples. Widely used in genomics, molecular biology, and next-generation sequencing workflows, the system streamlines fragment analysis by replacing traditional gel electrophoresis with a faster, automated process. It allows laboratories to process multiple samples simultaneously, delivering reproducible results with minimal manual intervention. The instrument supports a variety of assay kits for DNA and RNA analysis, enabling applications such as NGS library quality control, PCR fragment verification, and RNA integrity assessment. With integrated software for data analysis and reporting, users can easily visualize fragment distribution, concentration, and size profiles. Key Features: Pedpfsyr Nl Sex Ahljpt Automated capillary electrophoresis for DNA and RNA analysis High-resolution fragment sizing and quantification High-throughput sample processing Ideal for NGS library QC, PCR product analysis, and RNA quality checks User-friendly software with clear electropherogram and gel-style outputs The AATI Fragment Analyzer is a reliable solution for laboratories requiring accurate nucleic acid fragment analysis with improved efficiency and reproducibility

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Pedpfxsxzgzuo Ahlept Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Ppedpfx Aexzg Nxehljt Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: excellent (used), Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for the fully automated preparation of PCR and qPCR reaction solutions. It is designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to be integrated into automated workflows. Automation: It automates the pipetting and dispensing of PCR components (samples, master mixes, primers) into 96- or 384-well PCR plates. Volume Range: The hardware is designed for aspiration and dispensing volumes up to 1 ml. Traceability: It features automatic barcode tracking on accessories and consumables to ensure complete sample traceability. Software Integration: The instrument uses FLOW software, which imports test requests from laboratory information management systems (LIMS) and reports results. The software also allows for user-friendly configuration of PCR setups. Flexibility: It can be used either as a standalone instrument for PCR setup or in a "FLOW Flex" configuration for combined primary sample handling and PCR preparation. Accessories: Optional accessories, such as cooling blocks for PCR plates, are available to maintain the integrity of temperature-sensitive reagents. Applications Experts from Hamilton and Roche point out that the instrument is suitable for a wide range of genomic applications: Gene expression analysis Genotyping Sequencing Detection of pathogens (e.g., SARS-CoV-2 tests) Clinical diagnostics Power supply: 115 V AC to 230 V AC (+/- 10%) Frequency: 50/60 Hz +/- 5% Ppsdpfxeyk Uxno Ahlot Power consumption: 600 VA Dimensions: 112.4 × 90.3 × 100.6 cm (W × H × D) Depth without automatic loading: 79.5 cm Weight: 180 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Ppedpfsvzr Nbsx Ahlot Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 3,700 mm, table height: 900 mm, throat depth: 410 mm, clearance between the columns: 3,100 mm, oil tank capacity: 250 l, total length: 5,300 mm, total width: 2,700 mm, total height: 2,750 mm, overall weight: 13,100 kg, Equipment: CE marking, safety light barrier, 2012 Durma AD-R 37175 CNC Press Brake – 175 Ton x 3700mm | CNC Advantage Control | Tooling Included Used 2012 Durma AD-R 37175 CNC press brake for sale. 175 ton, 3700mm, CNC Advantage control, tooling included. Manufacturer: Durma Model: AD-R 37175 CNC Pressbrake Control: Durma CNC Advantage Control Year: 2012 Capacity: 3.7m x 175T Condition: Good Description 2012 Durma AD-R 37175 CNC Press Brake – a high-performance, precision hydraulic press brake designed for efficient and accurate sheet metal bending. This machine offers excellent value for workshops looking for a reliable 175 Ton CNC press brake with strong capabilities and proven Durma build quality. Manufactured by Durmazlar (Durma), a globally recognised leader in sheet metal machinery, the AD-R series is known for robust construction, ease of use, and excellent performance-to-price ratio. 🔧 Key Features 175 Ton Bending Capacity 3700mm Bending Length Durma CNC Advantage Control (2D Graphic Programming) 3 Axis Machine (Y1, Y2, X – Powered) Manual R-Axis via Backgauge Fingers Motorised Backgauge with Linear Guides & Ball Screw System European Style Clamping System Full Set of Top & Bottom Tooling Included Top Tool Hangers Included (Supplied, not shown in photos ⚙️ Technical Specifications Bending Force: 175 Ton Bending Length: 3700 mm Distance Between Columns: 3100 mm Stroke: 265 mm Daylight: 530 mm Throat Depth: 410 mm Table Width: 104 mm Table Height: 900 mm Speeds Y Rapid Feed: 120 mm/sec Working Speed: 10 mm/sec Return Speed: 100 mm/sec Backgauge X Axis Travel: 650 mm X Axis Speed: 500 mm/sec Backgauge Fingers: 2 (height adjustable) General Motor Power: 18.5 kW Oil Tank Capacity: 250 Litres Dimensions (L x W x H): 5300 x 2700 x 2750 mm Weight: 13,100 kg Ppedpfsy Ir D Dox Ahljt 💡 Machine Overview The Durma AD-R series is engineered for precision bending, low maintenance costs, and long-term reliability, making it an ideal solution for fabrication shops and industrial production environments. With a large daylight opening, generous stroke, and rigid frame construction, this machine is well suited for handling a wide range of sheet metal applications, from light fabrication to heavy-duty bending work. The CNC Advantage Control system provides: 2D graphical programming Automatic bend sequencing Easy part calculation USB program storage and backup User-friendly interface for fast setup and operation 🏭 Why Buy This Machine? Excellent price-to-performance CNC press brake Strong European build quality Ideal for steel fabrication, sheet metal workshops, engineering firms Complete with tooling – ready to go to work Reliable and simple CNC control – easy for operators 📦 Included with Machine Full Top & Bottom Tooling Set Top Tool Hangers (supplied) Sliding Support Arms Backgauge System Notes: *Specifications are given in good faith but not guaranteed*

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, overall weight: 875 kg, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, We offer this as new Donaldson DFPRE4 SPKTRP welding, plasma or laser smoke suction unit, year of construction 2025. Never used in production only used for demo. Fully assembled with pre-wired fan and controls. Model: DFPRE4 SPKTRP Serial number: 19318603 Sequence number: 01 Manufacturing date: 12-2025 Voltage: 3×400 V Power: 5.5 kW Frequency: 50 Hz Phases: 3 Net weight: 875 kg Control timer part number: AM2155001 Control timer input: 400 V~ Pedpfxoy T Ipye Ahlopt Control timer output: 24 V= If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm Ppedpfxjy Tmrme Ahlot - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Podpfx Aezachcshlept Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths Ppodjy Hixvopfx Ahlet • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: used, This listing is for the Bio-Rad C1000 Touch Thermal Cycler. The unit is in full working condition and ready for immediate use. Compact and reliable PCR thermal cycler featuring touchscreen control, precise temperature performance, and flexible protocol programming for molecular biology, genomics, and laboratory research applications. Transparency Report and Technical Audit: Ppsdpey Sf S Aofx Ahlst • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Ppedpfxev Nhg Sj Ahlet Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. Pedstximvepfx Ahlept With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Ppsdpfxoyak Dlo Ahljt Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine • Attractive financing options, even without down payment

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 PROFIT H350 16.30 CNC processing center was manufactured in 2017. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. The machine is equipped with a powerful 12 kW spindle and a dual-driven gantry system, ensuring high precision and efficiency. If you are looking to get high-quality machining capabilities, consider the FORMAT4 PROFIT H350 16.30 machine we have for sale. Contact us for further details. • Working hours: 9,370 h • Construction: Heavy-duty welded steel frame; dual-driven moving gantry • Power/Electrics: 3x400 V, 50–60 Hz • CNC software: WoodFlash suite (control panel, tool database, program editor, 2D simulator, 3D preview, DXF import, CAD functions, parametric/absolute/incremental programming, pocket milling, engraving, sequence optimization, virtual planes, subprograms) • Controls and operator interface: • CNC panel for full machine control • Mobile operator terminal with 24" LED monitor, keyboard/mouse, USB • Handheld feed control (feed override, E-stop, manual feed) • Working area and travels: • Working area: X 3000 mm, Y 1550 mm • Z clearance height: 150 mm • Main spindle (5-axis): • 5-axis electrospindle with Cardan joint, liquid cooled, ceramic bearings, R/L rotation • Power 12 kW (S6), 1,000–24,000 rpm • Tool holder HSK F63 • Max tool weight 6 kg; max saw blade Ø 350 mm • Integrated aggregate holder; electrically controlled extraction hood • Axis and motion system: • Dual-driven gantry • X: helical rack & pinion, hardened linear guides • Y: ball screw, hardened linear guides • Z: ball screw, hardened linear guides • Automatic central lubrication • Tool magazines: • Linear: 12 positions, aggregate pickup; max tool Ø 250 mm, length 240 mm • Rotary (on gantry): 18 positions; max tool Ø 250 mm, length 280 mm • Saw blade pickup station: max blade Ø 350 mm • Drilling and grooving: • DH18 6H 2S drilling head: • 12 vertical spindles (7X / 5Y), 6 horizontal spindles (4X / 2Y) • Drill stroke/length max 70 mm; tool holder Ø 10 mm; individually driven • Grooving saws: 2 blades (1X / 1Y), max Ø 120 mm, body thickness max 5 mm, up to 6,000 rpm • Vacuum and clamping: • Console table with 6 consoles; front/rear programmable stops • Wireless dual-circuit vacuum system; cup height 100 mm • Pneumatic console locking; 4 movable side stops; additional support arms • Vacuum pump capacity: 90 m³/h @50 Hz, 108 m³/h @60 Hz • Additional vacuum equipment: left/right template connections; controlled compressed air for frame clamps; independent vacuum/air control per console • Safety: • CE safety system, light curtain, emergency stop system • Safety fence on left side, door safety monitoring • Vacuum and compressed air sensors • Additional safety mat system Additional equipment • Additional A-axis and C-axis mechanical locking system • Remote service package via internet Podpjy Ux Upofx Ahlspt • Cabinet body generator software (3D cabinet design package) • Service tool kit • Documentation: Polish manuals; WoodFlash installation manual • Additional support arms for consoles • Included accessories: • 11 vacuum cups FA 140 × 115 × 100 mm • 4 vacuum cups FA 125 × 75 × 100 mmNote: Technical data provided for information only and not binding.

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Ppedpfeph Uk Njx Ahlet Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Podpfxsxqtvqj Ahlspt

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ppsdpfsvvkfdjx Ahljt

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret Podsyi Hrwopfx Ahljpt - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: used, Year of construction: 1996, workpiece length 55- 170 mm Ppodpfsy Ty Hqsx Ahljt work piece width max. 28 mm workpiece height max. 27,5 mm milling motor 2 cut-off saw 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces. Work sequence: 1. feeding the material from the magazine 2. cutting (sawing) to the desired length 3. milling of the cut workpieces 4. ejection of the finished part.

Condition: used, This listing is for Kingfisher Duo Nucleic Acid Purification. Podpfxjy Hrxxo Ahljpt The unit is in full working condition and ready for immediate use. This automated system uses magnetic particle technology for high-quality DNA, RNA, and protein extraction. It processes up to 12 samples per run, providing consistent results for proteomics and genomics workflows with minimal hands-on time.