Used Gear Pump for sale (21,767)

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Hfsdpfx Aow Rf S Seacjn Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: good (used), Year of construction: 2001, functionality: fully functional, Workpiece Data Maximum workpiece diameter: 275 mm Maximum normal module: 6 mm (at the pitch circle in steel with 600–700 N/mm² tensile strength) Minimum normal module: 1.5 mm Maximum face width: approx. 5.5 mm Maximum helix angle: approx. 60° Maximum number of teeth: 120 Minimum number of teeth: 5 Maximum transmission ratio: 1:10 Minimum transmission ratio: 1:1 Technical Data Dimensions and Weights Required space (L x W x H): 5200 x 2300 x 2400 mm (includes all auxiliary units and electrical cabinet with doors open) Net weight (including standard accessories): approx. 15,500 kg Gross weight with standard accessories and overseas packaging: approx. 16,800 kg Chip conveyor: 300 kg Coolant tank with chip conveyor: 450 kg Swarf filter (optional): 600 kg Power Supply and Connection Data Total connected load: 75 kVA Frequency: 50 Hz ± 1 % Voltage: 3 × 400 V ± 10 % Protection: 100 A slow-blow Power interruption: max. 3 ms Voltage dip: max. 20% of peak voltage for max. 20 ms Voltage spikes: max. 200% of nominal voltage for 1.5 ms Harmonic content: max. 10% of effective value Mains symmetry (voltage difference between 2 phases): max. 2% of nominal voltage Protective earth: interference-free Control voltage: 24 V DC Special configurations: on request Mains configurations: see Chapter 5.2 Connection location (installation and foundation plan): see Chapter 5.2 Compressed Air Supply Hfedoxmgr Dopfx Aacjn Pressure: min. 3.5 bar, max. 10 bar Flow rate (with open nozzle): 0.03 Nm³/min Humidity (max. pressure dew point): 10°C Temperature: 10°C to 40°C Solid particle size up to: 40 µm Connection and size: see Chapter 5 (installation and foundation plan)

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Bockwoldt, spur gear motor -Type: CB9-132M/6D -Speed: 20 rpm -Power: 5.5 kW -Shaft: Ø 65 mmx160 mm -Protection class: IP44 -Height shaft axis: 315 mm -Hole spacing across: 360 mm Hfedpfx Aot E D I Toacjn -Hole spacing lengthwise: 300 mm -Dimensions: 875/450/H500 mm -Weight: 231 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 260 kg, power: 5.5 kW (7.48 HP), The VTLF 2.250 is a medium vacuum, dry-running rotary vane displacement pump designed for continuous operation. It utilizes self-lubricating graphite composite vanes, requires only minimal maintenance, and does not require oil changes. 5.5kW 79dB Danmar Machines DEALER: D.M.A. MACHINERY Hfsdpfst Dwf Asx Aacen CNC machining centers assembled in the Netherlands for aluminium, sheet metal, wood, and plastics Full CE marking – Risk assessment – User manual – Declaration of conformity according to the Machinery Directive – Technical documentation View the machines at Machineseeker D.M.A. MACHINERY

Condition: used, Year of construction: 1993, max. wheel diameter 125 mm total power requirement 34 kW kW Hodpfx Aajtugkrscofn weight of the machine ca. ca6.9 t t dimensions of the machine ca. ca. 3.3 x 2,1 x 2,5 m m

Condition: excellent (used), mileage: 490,000 km, power: 265 kW (360.30 HP), first registration: 06/2008, fuel type: diesel, color: white, axle configuration: 6x4, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel, loading space width: 2,450 mm, loading space length: 7,000 mm, loading space height: 1,000 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, cruise control, differential lock, trailer coupling, = Additional Options and Accessories = - Leaf suspension Hsdjxixmlopfx Aacofn - Electric windows - Air horn - Spare wheel - Toolbox - Power take-off (PTO) - Central lubrication system - Towing hook = Notes = 3x extendable crane = Additional Information = Technical Information Number of cylinders: 6 Dimensions (L x W x H): 1040 x 250 x 380 cm Drivetrain AdBlue system: Yes Transmission Transmission: 16 gears, manual gearbox Axle configuration Suspension: leaf suspension Front axle: steerable; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 1: twin tires; differential lock; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80%; Reduction: outboard planetary axles Rear axle 2: twin tires; differential lock; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70%; Reduction: outboard planetary axles Functionality Crane: PALFINGER PK18000, year of manufacture 2008, mounted at the rear of the chassis Condition Technical condition: very good Visual condition: very good Further Information Please contact Andre, Henri, or Andre for more information.

Condition: used, Year of construction: 2003, max. wheel diameter 600 mm gear width 92 mm max. module 8 mm max. ram stroke 100 mm table diameter 400 mm workpiece dia. 600 mm Shockable standard module max. 8 mm angle adjustable from - to -0,5 / +0,5 Grad stroke range 80 - 1200 Hübe/min Hfjdpfx Aasvzhflocjn feed radial axis machine column 1 - 3750 mm/min Accessories: - Various stop blade holders - Various clamping devices

Condition: used, Year of construction: 2004, functionality: fully functional, KLINGELNBERG GEAR MEASURING MACHINE P26 Basic Data (Nameplate / Cover Sheet) Type / Machine: P26 Machine Number: B5646 Year of manufacture: 2003 Weight: 1,200 kg Drawing number: 3.650.01.5350 Hfodpfxjxl Agns Aacon Series: 737 Options: AV35, K30 Power supply: 190–500 V AC Part specification: Requirement specification GN 4401 System / Software Information URL / Manufacturer: www.klingelnberg.com Hardware: 586, 2, 0 Operating system (OP-SYS): 5.1 Windows NT BASIC: V6.4 CRT ID: 6:128HCG B255 (note, possible reading tolerances) Version / Build entries: PRO20050808 CRT20060309 KBD20050505 MNU20060118 TXT20060118 DMP20060311 PRT20030403 CAL20021306 MIP020/20020000

Condition: good (used), Double hydraulic pump, oil pump, gear pump -Hydraulic pump comes from a press brake -Manufacturer: Haemmerle Type AP100-2600 -double pump -Manufacturer: Eckerle -Pump 1: Type IPH/3-/10 X (max. 330 bar, 15 L/min) -Pump 2: Type IPH 3-10 (max. 330 bar, 15 L/min) -Drive: 11 kW -Speed: 1460 rpm -Dimensions: 752/250/H400 mm -Weight: 108 kg Hodpfx Aaod Eqliocefn

Year of construction: 2017, condition: used, New: No Empty weight: 20 kg Part suitable for: trucks Hfsdpfx Aoxlwcdeacsn Occ hydraulische pomp Article nr.: S082999298-veiling Used hydraulic pump

Condition: used, Lot consists of: (3) Vacuum unloading stations Position consists of: (3) vacuum unloading stations Technical Details: English: Hsdpswnbdajfx Aacofn Without control program German: Without control program

Condition: used, functionality: unexamined, machine/vehicle number: AA40 WN, overall weight: 240 kg, volume flow: 42 m³/h, input voltage: 220 V, Used Ebara AA40 WN Dry Vacuum Pump Manufacturer: Ebara Model: AA40 WN Ultimate Pressure: 0.2 Pa Capacity: 4200 L/min Hedsxlikmjpfx Aacsfn Power: 200/220 Volt, 50/60 Hz (3Ph.) The Ebara AA40WN dry pumping system is a microprocessor-controlled, modular dry pump package that offers exceptional control and monitoring capabilities. The AA40WN pump system can be locally operated via a handheld or mounted LCD control panel.

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation Hedow Rf S Espfx Aacefn

Condition: excellent (used), Year of construction: 2005, Manufacturer: Reishauer Model: RZ150 Year of manufacture: 2005 Control: Siemens 840D Location: Germany Status (October 2025): Axes secured, machine decommissioned, immediately available for delivery Working range Outer diameter of workpiece: 10 – 150 mm Module: m = 1 – 3 Helix angle: –1° to +40° Max. gear width: 100 mm Max. usable shaft length: 490 mm Grinding spindle / Tooling Max. grinding speed: 80 m/s Hjdpfx Aaoxl Accjcofn Grinding wheel (outer Ø / width): 275 / 125 mm Equipment Dual workpiece spindle concept Reishauer dressing unit RP120 (Reishauer no. 212289.50) Felsomat loader (loading/unloading) HOFFMAN HSF100/SE/K filtration unit Documentation / History Inspection protocols available; machine operated flawlessly in regular production until May 2025. Scope of delivery Machine as described including Reishauer dressing unit, Felsomat loader, and HOFFMAN filtration. Not included: Tools, grinding wheels, diamond dressing wheels, and other consumables unless explicitly stated in writing.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Hfodpfxexmd Shj Aacen Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW Hfjdpfx Ajt Drkyeacen -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 / 80 mm Hfodpexlug Hsfx Aacsn gear width 180 mm max. module 4 min. module 0,5 spindle turning speed - stepless 300 - 3000 U/min control Siemens 840 D x-travel 200 mm y-travel 170 mm z-travel 250 mm milling head -swivable +/- 45 ° table diameter 168 mm table hole 65 mm clamping length max. 245 mm table turning speeds 0 - 1000 U/min total power requirement 51 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 4,5 x 4,0 x 3,2 m

Condition: used, functionality: unexamined, machine/vehicle number: AA100 WN V1 H, overall weight: 270 kg, volume flow: 10 m³/h, input voltage: 220 V, Used Ebara AA100 WN V1 H Dry Vacuum Pump Hjdpfexlighsx Aacefn Manufacturer: Ebara Model: AA100 WN V1 H Ultimate Pressure: 0.13 Pa Capacity: 10,000 L/min. Power: 200/220 Volt, 50/60 Hz (3-phase) The Ebara AA40WN dry pumping system is a microprocessor-controlled, modular dry pump package that provides outstanding control and monitoring capabilities. The AA40WN pump system can be locally operated via a handheld or mounted LCD control panel.

Condition: used, Year of construction: 2007, max. workpiece diameter 800 mm profile depth 100 mm control Siemens Sinumerik 840 D x-travel 650 mm y-travel 300 mm z-travel 1300 mm spindle turning speed - stepless 400 - 4000 U/min table turning speeds 0 - 10 U/min total power requirement 110 kVa dimensions of the machine ca. 9,48 x 6,13 x 5,00 m weight of the machine ca. 24,5 t Tool: - Largest grinding wheel diameter 450 mm - Largest grinding wheel width 160 mm Feed rates: - X-axis 1 to 3000 mm/min - Y-axis 1 to 5000 mm/min - Z-axis 1 to 6000 mm/min Equipment/accessories: - Counterholder Hsdpfxow Rrcko Aacsfn - Grinding oil treatment system - Oil mist extraction - Measuring probe - Dresser - Technical documentation

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LIEBHERR LC-380 (2011) – 6/7-Axis CNC Gear Hobbing Machine MARCH 2025 Service Report from LIEBHERR included in the documentation Ø 380 mm | Module up to 7 (hobbing) / 9 (profile grinding/milling) | 600 mm face width | Siemens 840D sl Very well-equipped, late 2011 model (s/n FN9014) with special filtration for non-ferrous metals. Wet or dry machining possible; includes oil/media cooler, paper band filter, extensive hobbing arbors and accessories. The machine is fully enclosed and described as being in very well-maintained condition. Equipment & Options: - Siemens 840D sl CNC with hand-held control unit (teach) - Full enclosure, table clamping - Tangential hobbing device for high accuracy - Measurement system for A-axis swivel accuracy - Device for single-track measurement/spindle approach & probing function - Programmable tailstock - Paper band filter for non-ferrous material, scraper chip conveyor - Oil cooler, English language option - Several hobbing arbors/mandrels, HSK-A50 interface - Complete set of books & manuals Technical Data: - Max. gear diameter: 380 mm - Min./Max. center distance: 15 / 400 mm - Max. axial travel: 600 mm - Max. module (hobbing): 7 - Max. module (profile gear milling): 9 Hfjdpfxoxlz Nbo Aacon - Table diameter: 320 mm | Max. table load: 18 kN - Head swivel range (FK2.2): ±35° - Main drive power: 14 kW - Max. hob speed: 1,200 min⁻¹ - Max. tangential travel: 300 mm - Max. tool diameter × length: 160 × 330 mm - Tailstock column axial travel: 540 mm - Interface: HSK-A50 - Electrical: 220 V / 60 Hz - Machine weight: approx. 15,000 kg - Machining: wet or dry - Serial number: FN9014, year of manufacture 2011 - Stock no.: 16634234 | Model: LC-380 Key Customer Benefits - Flexibility: Wet/dry machining + filtration suitable for non-ferrous metals → wide material range - Accuracy: Tangential hobbing & A-axis measurement device → high gear quality - Productivity: 1,200 min⁻¹ hob speed, 600 mm face width → large parts in a single setup - Process Reliability: Oil/media cooling, table clamping, full enclosure - Turnkey Package: Multiple hobbing arbors and mandrels + complete documentation

Condition: new, Cat Pumps 7CP6171 High-Pressure Plunger Pump Technical Specifications Brand: CAT Model: 7CP6171D5552 Maximum Flow: 10.5 gpm / 39.7 l/min Hfedoxl Sy Ropfx Aacsn Flow m3/h: 2.38 Maximum Pressure: 2000 psi (7 - 140 bar) Inlet Connection Size: 3/4" NPT(F) Outlet Connection Size: 1/2" NPT(F) RPM: 1450 Drive Type(s): Belt, Clutch, Flexible Coupling, and Bellhousing Material: 316 Stainless Steel Find more new and used items in our shop! International shipping costs upon request!

Condition: like new (used), For sale Functioning Jessberger diaphragm pump JP-800.522 Hsdpsr Izydefx Aacefn For questions please contact me.

Condition: good (used), mileage: 212,642 km, power: 300 kW (407.89 HP), first registration: 04/2011, fuel type: diesel, color: other, axle configuration: 8x4, fuel: diesel, wheelbase: 4,200 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2011, Equipment: ABS, cruise control, retarder, traction control, - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control unit) - Short cab - PTO (Power Take-Off) - Pump - Auxiliary braking system Number of axles: 4, Configuration: 8x4, Twin tyres, Unladen weight: 18,853 kg, Gross weight: 32,250 kg, Total tank capacity: 280 liters, Number of differentials locks: 2, Suspension type: Leaf suspension, Cab type: Short cab, Cruise control, Tachograph (control unit), Digital tachograph, Electric windows, Electric mirrors, Radio/Cassette, Color: Multicolor, Heated mirrors, Lighting type: Halogen lamp, Speed limiter, Heated seat, Engine power: 300 kW (402 HP), Fuel: Diesel, Emission standard: Euro 5, Gearbox type: EPS, Gearbox: Mercedes Benz, Speed limiter, Gears: 16, Clutch pedal, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, PTO (Power Take-Off), PTO type: 2, Starter battery, Drum capacity: 7, Drum volume in m3, Compartments: 1, Mixer drive: Hydraulic pump, Type of load: Concrete, Pump, Pump manufacturer and type: Putzmeister 21.3, Water tank, Water tank capacity: 620 liters, Seating arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, PUMI, Liebherr 7M3, 21 mtr Putzmeister Transmission Gearbox: MB, 16 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Leaf suspension Axle 1: Steered; Tire tread left: 16 mm; Tire tread right: 16 mm Axle 2: Steered; Tire tread left: 8 mm; Tire tread right: 8 mm Axle 3: Twin tyres; Tire tread left inner: 19 mm; Tire tread left outer: 17 mm; Tire tread right inner: 20 mm; Tire tread right outer: 21 mm Axle 4: Twin tyres; Tire tread left inner: 13 mm; Tire tread left outer: 13 mm; Tire tread right inner: 14 mm; Tire tread right outer: 14 mm Dimensions Dimensions (L x W x H): 875 x 255 x 383 cm Weights Unladen weight: 18,853 kg Payload: 13,397 kg GVW: 32,250 kg Functional Pump: Yes Water tank: 620 l Maintenance APK (Technical Inspection): Valid until 07/2026 Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognisable quality • Good prices • Correct business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) License plates arranged quickly • Expert technical services • The security of 'recognisable quality' • And much more… Please visit our website for special offers and our complete stock: Leasing via Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send a request via our website. Contact us directly… Hfodpfx Aoxdabtjacsn

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, For sale is a beautiful LC 382 gear hobbing machine. The machine has been rigorously serviced by LIEBHERR and delivers outstanding tolerances. Max. workpiece diameter: 500 mm; max. module: 10; max. gear width: 350 mm; smallest machinable number of teeth: 4; milling head swivels +/- 45°; workpiece table load: 18 kN. Hodpfx Asxlzr Neacjfn

Condition: new, Year of construction: 2010, Pfeiffer DUO65 Pumping Station with OKTA 250 A and WD235 For sale is a used vacuum pumping station from Pfeiffer Vacuum, consisting of a DUO 65 rotary vane pump, an OKTA 250 A Roots pump, and the WD 235 add-on module. Technical details (according to the nameplate): Manufacturer: Pfeiffer Vacuum, Asslar (Germany) DUO 65 (PK D46 602 A) • Pumping speed: max. 70 m³/h Hjdsxlz Siepfx Aacofn • Oil filling: P3, 4.2 liters • Speed: max. 1800 rpm • Weight: approx. 70 kg OKTA 250 A (PP W21 000 A) • Pumping speed: max. 324 m³/h • Speed: max. 3600 rpm • Oil filling: P3, 1.5 liters • Weight: approx. 102 kg • Year of manufacture: 09/2010 WD 235 (PP S23 015) • Voltage: 3x 400 V / 50 Hz • Rated current: 6 A • Weight: approx. 235 kg • Year of manufacture: 10/2010 Use: High-performance vacuum technology, laboratory, industry, coating, research Condition: Used, functional Buy Pfeiffer DUO65 pumping stations and other items at great prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.