Used Gear Drive for sale (25,880)

Condition: used, Electric Loading Lift – Pedestrian Stacker, Tiller Stacker for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19152 Year of manufacture: 2010 Type No.: Rated capacity: 175 kg Lift travel: 1090 mm Lift height: 1780 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 800 mm Chassis length: 1100 mm Underride height: 175 mm Underride length: 670 mm Chassis version (front / rear): Ø 120 / 150 mm (2 swivel castors / 2 swivel castors) Total length: 1220 mm Total width: 700 mm Overall height: 1950 mm Maximum height: 2870 mm (with lifting aid fully extended) Motor power: 400 W Battery capacity: 24 V / 17 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x Lead-acid batteries, 12 Volt, 17 Ah in battery pack Rjdeflt Efjpfx Aa Usp - External charger 24 VDC, 3 Ampere (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load carriage double flange according to EXPRESSO standard, 2 pieces mounted on top of each other, each 280 x 50 mm / 4 mounting holes M10 Mounted lifting aid: Rotatable Roller Mount Expresso Type 04175470 Lifting aid load capacity: 70 kg Rotation via electric drive with stepless speed control Rotation range: 360° continuous Roller arms individually adjustable steplessly on linear guides Roller arm span min./max.: 1350 - 2050 mm (infinitely adjustable) Roller arm depth: 560 mm In the center of the roller arms is a workpiece holder (adjustment range 0 - 80 mm) Total weight: 150 kg good condition

Condition: used, Electric Load Lift – Pedestrian Stacker, Pallet Truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19153 Year of manufacture: 2011 Type No.: Rated capacity: 175 kg Lift travel: 1880 mm Lifting height: 2760 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Lifting aid outreach: 730 mm Chassis length: 970 mm Underride height: 90 mm Underride length: 485 mm Chassis configuration (front / rear): Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length: 1220 mm Overall width: 600 mm Construction height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 pcs lead-acid battery 12 Volt, 17 Ah integrated in battery pack - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Infinitely adjustable handgrip height - Load mounting flange according to EXPRESSO standard 280 x 50 mm / 3 mounting holes M10 spaced 110-110 mm Fitted lifting aid: Pivoting jib arm Lifting aid load capacity: 60 kg Rsdpfxefr Izgs Aa Usp Pivoting range: ±30° (lockable only at 0°) Jib arm length: 600 mm - Steplessly adjustable load eye, hole diameter 30 mm Total weight approx. 100 kg good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle Rsdpeflt Edefx Aa Uep - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg Rodpfsf Axn Uox Aa Usp good condition

Condition: used, Air operated double diaphragm pump DEPA Type DH40-FA-ZRT Air operated diaphragm pump, double pump Serial No.: B1802498 Year of manufacture 09.05.2018 Temperature: max. 130°C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height product filled: approx. 9 m Operating pressure: max. 7 bar air connection: 3/8" suction connection: 1 1/2" Rodpfx Aeib D H Usa Ujp pressure connection: 1 1/2" - self-priming - aluminum housing - Diaphragm plate made of stainless steel - Diaphragm made of nopped E4® PTFE compound - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm own weight: 15 kg very good condition

Condition: used, Static frequency inverter Manufacturer: GARBE LAHMEYER & Co. AG Type SU3760.2aFZ231 Year of manufacture: 1989 Rsdpfx Ashutxzea Usp Make No.: A2K 60229 0001 Rated power 500 kVA Type of current D Mains voltage 380 Volt Input frequency 50 Hz Input current 760 Amp. Type power input 760 Amp. Output voltage 380 Volt Output frequency 50 Hz Output current 760 Amp. Type power output 760 Amp. - Control unit GARBE LAHMEYER type AEB 60 Cabinet dimensions (W x H x D) 2250 x 800/900 x 2550 mm Transport dimension (W x H x D) 2430 x 1100 x 2700 mm Weight 1660 kg

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Rodjflt Ebjpfx Aa Uop Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Rodpfsfxg T Uox Aa Usp Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. Rjdpfxjqv I S Ss Aa Ujp 0239398K Year of construction: 1993 Rated power: 6 kW Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Rododzp U Aspfx Aa Ujp Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: used, Wall-mounted slewing jib crane with hoist, slewing drive, and trolley ABUS Wall-mounted Slewing Jib Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Slewing range: 180° Outreach, jib tip to wall: approx. 6640 mm Minimum outreach (crane hook to wall): approx. 1450 mm Maximum outreach (crane hook to wall): approx. 6250 mm Trolley travel distance: approx. 4800 mm Hook distance from jib tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Jib length without wall bracket (slewing bearing): 6530 mm Total height with wall bracket (slewing bearing) and mounted components: 2590 mm (overall height) - Jib profile: double-T steel beam (height 600 x width 220 mm) Redpfswzmi Isx Aa Usp - Jib electrically slewing via geared motor (2 speeds) - Electric slewing drive with limit and preliminary limit switches - Slewing angle end positions with electric end and preliminary limit switches - Painted in ABUS Yellow (original paint) - 2 wall flanges 340 x 280 mm, each with 6 Ø 27 mm holes - Mounting surface for wall flanges (W x H): 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Rated load: 3200 kg Reeving: 4/1 Lifting height: max. 6 meters Lifting speed: 5 meters/min. Creeping (fine) lifting speed: 0.8 meters/min. Trolley travel speed: approx. 4.5 and 19 m/min. - Control via radio remote and emergency control via pendant on cable - Trolley travel with electric drive, with limit and preliminary limit switches - Approx. 20 operating hours - Last inspection: April 2024 at 19 operating hours Wire rope hoist weight: 250 kg Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight jib with wire rope hoist: 1500 kg Very good condition

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing Rsdpfx Aevkpu Hea Uep *

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 180 mm Rjdpfxeyk Ur Us Aa Uep gear width: * mm max. module: 4 total power requirement: 14 kW weight of the machine ca.: 8 t slide travel axial ( Z-axis ): 300 mm work piece - max.: 490-640 mm

Condition: good (used), Servo motor, electric motor, DC motor, servo geared motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 44X25SI -Voltage: 24 V -Speed: 2860 rpm -Gearbox: PLG 52 i = 8:1 -Shaft: Ø 12 x 22 mm -Number: 7x geared motors available -Price: per piece -Dimensions: 172/58/H52 mm -Weight: 1.1 kg/pc. Rsdpfx Aep Hiywea Usp

Condition: good (used), Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer: MOTOVARIO TKFL/10 gearbox -Manufacturer: ASEA MT80B19F100-4 engine -Motor power: 0.75 kW Rodpfochfb Rox Aa Uop -Speed range: 190-1000 rpm -Motor: adjustable -Drive shaft: Ø 24 mm -Design: B5 -Quantity: 1 motor available -Price: per piece -Dimensions: 445/255/240 mm -Weight: 29 kg

Year of construction: 2020, condition: good (used), Indexer, indexing gear, cam indexer, rotary table indexer, rotary indexing drive -Manufacturer: Candex, cam indexer -Type: RU45DFS-02-180-2RX-CN -Shaft: Ø16 mm / 2x Ø14 mm -Translation: 1:2 Rjdpfoyilg Rjx Aa Usp -Dimensions: 160/150/H130 mm -Weight: 5.2 kg

Condition: used, Year of construction: 2008, operating hours: 5,981 h, machine/vehicle number: S8008-6473, mast type: telescopic, fuel type: diesel, Empty weight: 16.400 kg Lifting capacity: 227 kg Rsdpfx Aeyhvmzoa Usp Working height: 2.790 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Wide Wall Max. horizontal reach: 2360 m Transport dimensions (LxWxH): 10.4x2.44x2.8 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Pitch angle min/max 5°/84° Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Rodpfx Aeyh Rmtoa Uop speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: -Cutting tools -Spacer angle -Technical documentation

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Rodsyh Rmmspfx Aa Ujp Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed Rjdjwdyx Uspfx Aa Uep *

Condition: used, For sale is a HEIDENHAIN CC 424B with ID 580 501-01, in like-new condition. The unit is fully functional and has been carefully tested prior to sale. Details: Rsdjyigbvjpfx Aa Ujp Manufacturer: Heidenhain Model: CC 424B ID: 580 501-01 Condition: Like new Functionality: Fully tested, working perfectly Warranty: 7-day functional warranty The item will be securely packed for shipping. Ideal as a replacement part or for immediate use in existing systems. Please feel free to contact me if you have any questions or are interested.

Condition: used, A HEIDENHAIN MC 422D with ID 747 624-01 is for sale in mint condition. Rjdpfx Aeyigbpoa Usp The device is fully functional and has been tested prior to sale. Details: Manufacturer: Heidenhain Model: MC 422D ID: 747 624-01 Condition: As new Function: Flawless, tested Warranty: 7-day functional warranty The item will be carefully packaged for sale. Ideal as a spare part or for immediate use in existing systems. Please do not hesitate to contact me if you have any questions or are interested in purchasing.

Condition: good (used), Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket -Drive wheel: Conveyor chain wheel with 11 teeth -Division: 100 mm -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm Rjdpfswztu Rsx Aa Usp -Quantity: 2x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Condition: good (used), Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket Redpfowztxpsx Aa Ujp -Drive wheel: Conveyor chain wheel with 11 teeth -Division: approximately 100 mm -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm with groove -Number: 6x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Condition: ready for operation (used), Drive-unit Kleemann Brand: Kleemann Roll lenght: 750 mm, Ø 420 mm Redpfji A Apqsx Aa Uep Beltwidth: 650 mm Speed: 1,3 m/sec Driving: Stiebel Gearbox 15 kW