Used Gauge for sale (1,871)

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Width:800mm Redpfx Aey Uvhyekijch Height:1400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 100 t, clearance between the columns: 2,600 mm, Make: Gasparini Rcjdpfx Ao Aa Dc Djkish Model: PSG 100 Year of manufacture: 1994 Type: Press brakes Control: CNC Controller: upgraded DELEM DA-65R controller Crowning: yes (hydraulic crowning) Press force (tons): 100 tons Working width (mm): 3000 mm Distance between columns (mm): 2600 mm Throat depth (mm): 360 mm Back gauge stroke (mm): 650 mm Power (kW): 7.5 kW Dimensions L x W x H (mm): 3500 x 1550 x 2600 mm Machine weight (kg): 9000 kg

Condition: excellent (used), functionality: fully functional, Robust Möhringer auxiliary wagon in steel construction. Reinforced. Can also be used as an auxiliary wagon for other clamping trolleys with a 900 mm gauge, such as Linck, Weiss, Mayerhofer, etc. Gauge: 900 mm. Wagon height: 420 mm. Tilting carriage with continuous chain, powered. Hydraulic carriage for round timber, hydraulically adjustable and tiltable. Feeding from both sides possible. Rsdpfx Ajwv Rcuekisch Technically inspected.

Condition: good (used), Year of construction: 2020, functionality: fully functional, overall weight: 170 kg, total length: 705 mm, total width: 750 mm, total height: 1,800 mm, volume flow: 520 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 78 dB, type of cooling: air, Equipment: type plate available, Little-used compressor (90% used for blowing air) from a model-making business for sale: V-belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure, increasing performance and ensuring high efficiency. Tank with baked-on internal coating. 15-year warranty* on the tank against rust. Standard equipment includes all fittings: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensate drain valve, and shut-off valve. Standard equipment includes rubber vibration dampers. Electrical connection 400 V/50 Hz (three-phase). Intercooler and aftercooler ensure rapid cooling of the generated compressed air. The low speed reduces vibrations, protects the compressor components, and reduces noise. Large fan impeller for optimum cooling. Easily accessible condensate drain under the tank. Also suitable for easy connection of a condensate drain line (Ecomat). Retrofitting of a refrigerant dryer is possible without any problems. Space-saving solution with a vertical tank. Technical data: Pressure: 10 bar Intake capacity: 660 l/min Speed: 1025 min-1 Rsdpfo Agwf Nex Akioch Tank volume: 270 l Weight: 170 kg Noise: 78 dB(A) Dimensions (W x D x H): 750x705x1800 mm Effective delivery rate: 520 l/min

Condition: used, Internal precision measuring instrument, 2-point internal precision measuring instrument set, borehole measuring instrument Manufacturer: Mitutoyo Used Rcodpfx Aszul Hvskieh Measuring range [mm]: 18-150 Testing equipment in original packaging 2 units available, each in its original case Case contents are not complete; does not include a dial indicator. Price: Negotiable Our asking price for 1 unit is €330.00 net, ex works, plus packaging costs. All technical data is subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: ready for operation (used), Year of construction: 2002, Available immediately ex-yard: Hydraulic plate shear Baykal Type HGL 3100 x 6 Year of manufacture 2002 Cutting length 3060 mm Steel 6 mm Stainless steel 4 mm Distance between uprights 3100 mm Rjds Afcmlopfx Akiech Hydraulic hold-down clamps 16 pieces Strokes/min 15 Controlled back gauge 6 - 1000 mm Cutting angle 1.6 degrees Drive power 19.5 kW Weight 6300 kg Price: EUR 8,500.00 plus VAT, ex-yard.

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Redpfx Aez Icuhskijch Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Colly hydraulic plate shear, type GTS 2 4006 working width 4050 mm maximum sheet thickness 6 mm motorized back gauge Elgo digital adjustment for the back gauge Rcsdpj Af Ivxefx Akioh

Condition: used, This listing is for a Keith Shuttleworth & Associates SQ1 Steam Quality Test Kit The unit is in full working condition and ready for immediate use This steam quality test kit is a high-quality lab instrument manufactured by Keith Shuttleworth & Associates (Model: SQ1). This portable system is designed for testing the quality of steam used in sterilization processes, ensuring compliance with industry standards such as EN 285. It includes the primary condenser unit, pressure gauge, and various accessories housed in a durable carrying case for field use. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Rcodpfxo Agpwgo Akish specifications_en: Cooling In: Max 4 BARG / 60 PSI; Steam In: Max 7 BARG / 100 PSI.

Condition: excellent (used), functionality: fully functional, 1 x Cintex Ferrous-in-Foil metal detector mounted on a conveyor belt with retractable belt system into a lockable bin. This metal detector meets full retail specification. Rcodjyn N Rmspfx Akioh Manufacturer – Cintex. Model – Sentry. Aperture dimensions - 370mm wide x 105mm high (clearance). Belt dimensions - 300mm wide x 1500mm long. Direction - runs Right to Left. Electrical requirements – 230 V / 50 hz / 1 phase. Full retail specification, features - reject confirmation, reject bin full monitoring, low-air monitoring, electronically lockable bin with bin door open monitoring, backup PEC. Upgraded from an Autosearch 2 and fitted with new conveyor belts, new pressure gauge, received PLC program adjustment and received a full service.

Condition: excellent (used), Thread ring gauges, 100 - 170 mm diameter (Stock no. 45131) 1 lot or sold individually 170 x 2, 6g 130 x 3, 6h 130 x 4, 6h 130 x 4, good condition 130 x 6, good condition 130 x 6, 6h 125 x 3, 6h 125 x 2, 6g 124 x 4, good condition 120 x 4 120 x 3 120 x 3 100 x 6, good condition 100 x 4, 6h 100 x 3, 6h Redoyt Eg Ijpfx Akisch

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. Rcodpfx Ake Adfddeioh • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: excellent (used), • Robust and stable aluminum base • Two guide rails for smooth movement • LCD display with clear readings • Functions: ON/OFF, ZERO, HOLD, PRESET • Original quality “Made in Japan” • Clearly visible serial number – guarantees authenticity • Very good condition – used equipment, tested • No play, accurate and repeatable measurements • Ready for use – no additional accessories required Rcjdpfjz Slbhex Akieh An excellent tool for workshops, tool rooms, quality control departments, and for precise measurements.

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar Redpfx Akjyffm Eoijch -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg

Condition: excellent (used), stroke length: 215 mm, power: 11 kW (14.96 HP), pressing force: 150 t, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, Bystronic PR 150 Ton x 3100mm 6 Axis Back Gauge. X1. X2. R1. R2. Z1. Z2 Hydraulic Upper Tool Clamping Hydraulic Crowning Hydraulic Hemming table ( Dutch Folding ) 100mm Extra Daylight Motorised Laser Guarding Cybelec ModEva 12 Colour Graphic Control Full Upper & Lower Tooling Set of Manuals Rodpfxo Aa A Uro Akiech Can be viewed under power We can load to suitable transport

Condition: excellent (used), Mitutoyo Frame Micrometer (28662) 103-155 OM-475, measuring range 450 - 475 mm Redpfx Ajw Suwgokiech

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, stroke length: 200 mm, throat depth: 400 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table height: 900 mm, oil tank capacity: 350 l, overall weight: 16,950 kg, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, clearance between the columns: 3,820 mm, distance table to ram: 400 mm, ram plate length: 4,270 mm, table length: 4,270 mm, table width: 120 mm, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Rodez Eqwlepfx Akisch Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: used, Weinig planer blade setting gauge for Planer Head 500 or planer heads with strip planer blades Technical data: Rcsdpfe Afkp Iex Akish - Flight circle (ø): 125 mm - Bore: 40 mm - Length: 230 mm - Material: steel

Condition: excellent (used), Depth gauge Make Sylvac SA (108145) Type JP 500/0.01 Measuring length 500 mm Rodpfx Ajvcl Rzekisch Measuring accuracy 0.01 mm Length of measuring bridge 150 mm

Condition: excellent (used), 1 lot of thread plug gauges – 1,200 Euro Stock number: 45133 Individual sale possible Single prices, see list: M6 15 Euro M8 15 Euro M8x1 15 Euro M10 16 Euro M10x1 17 Euro M12 18 Euro M12x1.5 18 Euro M14 18 Euro M14x1.25 18 Euro Rjdpoywtfuofx Akiech M14x2 18 Euro M16 18 Euro M16x1.5 18 Euro M20 18 Euro M20 left-hand 18 Euro M20x1.5 18 Euro M22 18 Euro M22x1.5 18 Euro M22x2.5 18 Euro M24 18 Euro M24x1.5 18 Euro M24x2 18 Euro M24x3 18 Euro M27 25 Euro M27x1.5 25 Euro M27x2 25 Euro M28 26 Euro M30 30 Euro M30x1.5 30 Euro M30x2 30 Euro M30x3 30 Euro M32x1.5 30 Euro M33 30 Euro M33x1.5 30 Euro M33x2 30 Euro

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 578 034 05, Bobst Autoplatine SP 104 ER Year: 2001 Serial Number: 0578 034 05 / 0531 021 05 Automatic die cutter for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop and pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centerings at stripping and delivery stations Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard and corrugated board up to 4 mm 4 laterally guided transport belts Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm Upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centerings, ±0.9 mm Lowering of the chain guides Waste Stripping Station System with 3 pull-out frames 2x upper pull-out frame 2x lower pull-out frame Central quick locking pull-out frame Blank Stack Delivery Station Automatic binder sheet inserter Gripper opening device for full sheet stacks Automatic non-stop device Special non-stop rack for small boxes below 140 mm Pile raising security Waste / skeleton removal apron Braking brush of the waste skeleton Front trim ejection control by photocells 2x upper pull-out frame Rjdpfx Aks Afwrveisch Lower pull-out frame Pallet changing device with conveyor Technical Details Parameter Value Production Rate 8,000 sheets/hour Max Sheet Size 1,040 x 740 mm Min Sheet Size 400 x 350 mm Max Die-Cutting Size (with gripper margin) 1,040 x 725 mm Max Cutting Die Size 1,050 x 746 mm Convertible Stock Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Parameter Value Max Platen Pressure 2.5 MN (250 t) Max Pile Height Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size 1,200 x 800 mm Compressed Air min. 6 bar; without central supply, a compressor of 80 m³/h with 500 l tank is required Net Weight 20,000 kg Electricity Main motor 11 kW, total connected load max. 25 kVA still connected to power

Condition: used, functionality: fully functional, Leary LS-4R Glue Application & Quality Control System (iQ Enabled), with Array module, Quantum glue valve, and Leary ejector. ###Identification Model: LS-4R Serial number: 20406 Part no.: 00140010, Rev. 16 CE marked, iQ enabled ###Configuration (as visible) Leary Array module mounted on an overhead gantry Leary Quantum glue valve with product detection sensor Central glue distribution manifold with 8 outlets, plus a purge valve and pressure gauge Leary PS9 sensors and Leary Quad sensor Leary ejector motor starter for automatic rejection Operator touchscreen display (Leary/Array) Column-mounted control cabinet with overhead gantry and signal tower Rjdpfs Afwpbex Akijch Pneumatic piston glue pump on a mobile floor stand, with an inline glue filter and filter/regulator/lubricator for air preparation Separate electrical junction box with a complete cabling set Operating instructions for the PS9 sensors on the machine (in Dutch) ###Note The buyer is responsible for disassembling the system; no tools are provided. The system is still connected to power.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 3131151803, Offer 26255 Technical specifications: - max. working width 1350 mm - max. cutting capacity St 40 3 mm - cutting angle 2.30° - motorized back gauge 20 - 750 mm - sheet metal lifting, pneumatically assisted - rear guard with light curtain - front angle stop + support arms - stroke rate depending on cutting length up to 42 strokes/min - pneumatic connection 6 bar - drive 400 V / 7.5 kW Redpfx As Af Igxskioch - table height approx. 850 mm - electric foot pedal - space requirement including back gauge and rear guard, without front support arms - approx. W 1950 x H 1250 x D 1950 mm - weight approx. 1800 kg

Condition: excellent (used), Thread ring gauges (45132) Available as a set or individually M33 x 1.5 M42 x 2 M50 x 1.5 M58 x 3 6g Rodsyu N N Njpfx Akioch M35 x 1.5 M42 x 2 6h M50 x 1.5 6h M60 6h M36 M42 x 3 M52 x 1.5 M60 x 2 M36 6g M42 x 4 M52 x 1.5 6h M62 x 1.5 6g M36 6h M42 x 4 6h M52 x 2 6h M62 x 2 6h M36 x 1.5 M45 M52 x 3 6h M36 x 1.5g M45 6h M55 x 2 M36 x 1.5 6h M45 x 1.5 M56 M36 x 2 6g M45 x 1.5 6g M56 x 2 M36 x 3 M45 x 1.5 6h M56 x 2 6h M36 x 3 6h M45 x 2 M56 x 3 M38 x 1.5 M48 M56 x 3 6h M38 x 1.5 6h M48 x 1.5 6h M56 x 4 M39 x 6h M48 x 3 6h M56 x 4 6h M39 x 1.5 M48 x 4 M58 x 1.5 6g M40 x 1.5 M48 x 6h M58 x 2 M42 x 1.5 M58 x 2 6h M42 x 1.5 6h

Year of construction: 2024, condition: ready for operation (used), Glazing bead saw manufactured in 2024. This ROTOX GLA 401 features simultaneous cutting of 4 glazing beads at 45° and milling of fixing holes. It includes pneumatic material clamping and an electric locking machine cover for enhanced safety. The machine accommodates PVC profiles with a maximum section of 375 × 45 mm and offers a cutting length of up to 260 mm with a length stop. If you are looking to get high-quality cutting capabilities, consider the ROTOX GLA 401 machine we have for sale. Contact us for further details. Rcsdpfxezg Igpj Akijh • Function: Simultaneous cutting of 4 glazing beads (45°) and milling of fixing holes • Pneumatic material clamping: Yes • Pneumatic pressure: 2 bar • Pneumatic pressure gauge with filter: Yes • Electric locking of machine cover: Yes • Clamping plates: Tool-free • PVC profile section capacity: Min 50 × 50 mm; Max 375 × 45 mm • Cutting length: 200 mm (without length stop); 260 mm (with length stop) • Electrical connection: 400 V / 50 Hz • Installed power: 1.1 kW • Profile list: Available • Operating instructions: English • Machine inscription: Italian • Attachment side: Right