Used Gasket for sale (112)

Year of construction: 2018, condition: ready for operation (used), Two custom-made, yet reprogrammable and modifiable mixing and metering systems for 2-component polyurethane mixtures are available. 1) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g–0.15g/s, material: 2K PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g–2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems include peripheral devices and systems for monitoring and controlling temperature, consistency, mixing, refilling, and other processes. The systems can presumably be adapted to any mixing ratio – exclusively for polyurethane. Documentation available. An on-site inspection is possible. Gsdpfx Agsw Hglte Estt

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 2,889 mm, space requirement length: 11,292 mm, space requirement height: 2,675 mm, overall weight: 36,000 kg, temperature: 150 °C, operating pressure: 6 bar, pressure: 6 bar, power: 110 kW (149.56 HP), type of input current: AC, operating temperature: 150 °C, Equipment: documentation/manual, Equipment Type: Dry Product Capacity: Circa 500kg/hr Design Conditions: 150oC; 6barg/ Full Vacuum Materials of Construction (Product Wetted): 304L SS, Viton O-Ring, PTFE Reinforced Flat Gaskets Electric Motor: 3 Pole / 480V / 60Hz, 110kW, 1780 rpm, Eex de IIB T4, IP 65; Gedpfxet Uqlde Ag Estt Horizontal, Single-Shaft, Continuous, Vacuum Kneader- Dryer Single step direct (contact) evaporation/drying process 3 heating zones on shell, 2 heating zones on agitator Twin screw feeder General Applications: Drying of products exhibiting multiple phase change e.g. Liquid –> highly viscous –> pasty–> free flowing powder or granular solid Ability to handle foaming, stickiness, crusting & required variation of temperature and drive input requirements Self-cleaning design and heavy duty/high torque to promote heat and mass transfer Potential Applications: Drying of a crystalline mass, e.g. Anti-Oxidants: Typical solvents: Methanol, Cyclohexane, Isopropanol Industrial Residues: Recovery of hazardous / valuable materials from wastes. E.g. TDI (Polyurethane monomer) from distillation residue Drying of paint and lacquer sludge Recovery of water/toluene from rubber residues Recovery of solvents from vitamin distillation residues Polymerisation Reactions..

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Gtsdpfjwi Snxox Ag Eot Model: DMMH NC 4113 Year: 2008 Standard Control: Dener HT 071 Cutting Length: 4,160 mm Maximum Cutting Thickness: 13 mm Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Manual Lubricator *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Delivered fully inspected and with a 6-month warranty.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, - Designed for joining four corners of PVC profile corners by welding them at the same time. - It is used to weld four corners of PVC profiles at the same time at an angle of 90 degrees. Gtodpfx Asrcy Trog Eet - 0.2 mm welding possibility for all profile types - Quick mold change system that prevents wasted time - High speed and precision welding thanks to axes controlled by servo motors and planetary gearboxes - With the PID system, heating degree and time parameters are adjusted independently of each other - Single corner welding capability - U (door without threshold) boiling system - 10.1" touch control panel - Boiling, cooling times and temperature settings are digitally adjusted according to the profile type - The Teflon surface can be changed quickly thanks to the roll-shaped Teflon PROFILE ; - Max. weldable profile height 200 mm - Weldable Min. Profile Height 200 mm - Weldable Frame Minimum Width and length 410*495 mm, 520*520 mm (Gasket Printed) - Working angle range 90 degrees PRECISE MOVEMENT WITH SERVO MOTOR AND PLANETARY GEARBOX - Highly precise and error-free operation with axes controlled by high-speed and precise servo motors AND gearbox compatibility OPTION - Gasket pressing system

Condition: used, mileage: 669,852 km, first registration: 05/2010, fuel type: diesel, color: blue, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, tail-lift, * Our internal number: 1058 * MAN TGS 26.440 * FIRST HAND * All repairs were carried out in an external workshop, including customer service - invoices are available. * New front axle brakes including discs at 653,745 km * New batteries at 622,854 km * New rear axle brakes at 610,516 km * New combination cylinder at 610,516 km * Valve cover gasket replaced,... * AdBlue injector replaced,... * Service,... * Invoices for EUR 21,200 are available * Trailer hitch Gtodpfx Aevdhurjg Eet * BÄR tail lift * 669,852 km - Original * etc. * All information without guarantee * We reserve the right to sell the vehicle prior to purchase * Please refer to our terms and conditions

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: RE000097377, overall weight: 800 kg, volume flow: 480 m³/h, Equipment: type plate available, 🧊 Refcomp 134-S-120-LZ Refrigeration Compressor – Fully Inspected and Bearings Replaced, With Warranty! Manufacturer: REFCOMP Model: 134-S-120-LZ Capacity: 4480 m³/h Condition: Fully serviced – new bearings, seals, and oil filter! Warranty: 6 months Availability: Immediate Description Gtodpfxjxvputs Ag Ejt Compressland offers for sale a screw compressor that has undergone thorough, professional inspection and replacement of all key components such as bearings, gaskets, and filters. The unit has been thoroughly checked, tested, and fully restored to optimal working condition. Why choose our compressors? ✅ Complete refurbishment – all worn components replaced, pressure and performance tests carried out. ✅ High efficiency and cost saving – compressors operate like new, with lower energy consumption. ✅ Quality assurance – every unit undergoes strict testing and comes with a 6-month warranty. ✅ Environmentally friendly – refurbishment reduces your carbon footprint and maximises resource responsibility. Additional information We also offer a range of overhauled piston and screw compressors. Contact us – we will help you select the right model for your refrigeration system.

Condition: like new (used), Year of construction: 2015, operating hours: 30 h, functionality: fully functional, NORD 9092.1/52 180TC2-112MH/4 SK9092.1/52-11 - Motor speed: 1,440 rpm - Reduction ratio: 2,116.80 - Number of gear stages: 5 - Output speed: 0.680 rpm - Service factor: 0.60 - Output torque (Nm): 56,150.00 - Rated motor power (kW): 4.000 - Motor supply voltage (V): 400/690 - Rated frequency (Hz): 50 - Efficiency class: IE3 - Duty type: S1 (continuous operation) - Motor protection class: IP55 - Motor insulation class: F Gtjdpoxvbxdefx Ag Eet - Rated current 1 (A): 7.85 - Rated current 2 (A): 4.53 - Power factor (cos φ): 0.83 - Mounting position: M1 - Mounting type: Foot-mounted (Na feet) - Output shaft position: Side A - Output shaft dimensions (mm): 140x250 - Automatic breather - Shaft seal type: Double shaft seal - Motor thermal protection: PTC sensor, 3x155°C - Motor connection: Delta - Motor terminal box position: 1/I - Gear oil type: Mineral ISO VG 220 - Oil capacity (l): 41.000 - Gear oil type (secondary): Mineral ISO VG 220 - Oil grade: CLP 220 - Secondary oil capacity (l): 3.000 - Paint color: RAL 5010 - Paint system: Standard - Paint coating: Basic - CE Mark: Yes - CCC mark: None - NOM (Mexico Certification): No - UL Certification: No - CSA Certification: No - DoE CC: No - CSA Energy Verified: No - High Efficiency (Alto Rendimento): No - Korea Energy Label: No - Cable glands: CG M32X1.5 PA6 GASKET Note: All technical data complies with professional standards and is presented in an industry-specific format for machinery and commercial vehicle listings.

Year of construction: 2010, condition: excellent (used), The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Gtodpow Hk T Usfx Ag Eet

Condition: excellent (used), SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: CM17B9 - General Industry - Application: Bonding, Sealing, Gasketing, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 6.1 L/min - Maximum working pressure: 441 bar Gjdpfx Ajv Tmcasg Eott - Maximum air inlet pressure: 10.34 bar - Pressure ratio: 63:1 - For 200 L drums - Maximum operating temperature: 49°C - Includes new hoses and gun - Graco ULTRA LITE 6000 gun - Nozzle to suit

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Godpfer A Dm Iex Ag Estt Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Flow rate 43 L/min Weight 1100kg The set includes a set of gaskets and consumables for the pump

Condition: used, mileage: 700,150 km, power: 107 kW (145.48 HP), first registration: 08/1976, fuel type: diesel, number of seats: 31, gearing type: mechanical, * Our internal number: 1032 * S 80 Setra * EZ 08/1976 * Henschel 552 * 5 cylinders Gedjt U Uvyjpfx Ag Eett * to be given to loving hands * Leaf spring * 29+1+1 seats * 24 V system * Total weight: 9000 kg * Length: 7690 / width 25000 / height: 2870 / 3150 * Auxiliary heating * Refrigerator * Radio / cassette / microphone * Extract from the repair history: * Clutch, clutch pressure bearing, rear axle spring and, rear and front axle shock absorbers, head gasket repair, * Rear axle tires, ... * All information without guarantee * We reserve the right to sell the vehicle prior to sale * We refer to our terms and conditions

Condition: like new (used), Filter elements (spare parts) for kieselguhr filter SEITZ - ORION L Gsdpjq H Smaofx Ag Eett 1. SS stainless steel plates and frames 40/40. Mounted together on wheels. 2. SS stainless steel plates 60/60. 9 pieces 3. Gaskets 14 pieces 4. Gaskets 16 pieces 5. Gaskets 26 pieces

Condition: like new (used), Year of construction: 2025, Ex-demo unit in like-new condition, originally packaged by the manufacturer, with warranty. PRODUCT DESCRIPTION The BINDER ultra-low temperature freezer ensures safe storage of samples at -90°C. It combines excellent environmental performance, low energy consumption, convenient operation, and a tailored safety concept. KEY FEATURES Gedpfx Aoxlptbsg Eett Temperature range: -90°C to -40°C Lowest energy consumption in its class High-performance refrigeration units with cascade compressors Environmentally friendly refrigerant R-290 and R-170 Thermal insulation with premium long-life VIPs (vacuum insulation panels) Modern door gasket concept reduces icing Ergonomic door closure lever Corrosion-resistant interior made entirely of stainless steel Removable inner doors made of stainless steel 3 freely positionable stainless steel shelves Water cooling (variant-dependent) Potential-free alarm contact for building alarm system integration Internal data logger; measurement values available in open format and can be read via USB Ethernet interface 3 access ports Ø 28 mm, at the rear

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 230 kg, hopper volume: 200 l, Food-grade sack emptying hopper Door with vertical upward opening Transparent plexiglass viewing window EPDM food-grade door gasket Round tube handles Removable grid – thickness 5 mm, mesh 20×20 mm 3 suction pipes Ø60 mm with reduction to Ø50 mm, suction capacity adjustable as specified Connection for level probe G1"1/2 (final third) Constructed entirely in AISI 304, total weight 230 kg, internal polishing Gtsdpfx Agjw Sddio Eet

Condition: excellent (used), SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: 224350 - General Industry - Application: Painting, Bonding, Sealing, PVC, Gasketing, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 9.46 l/min Godpjv Tmalsfx Ag Eett - Maximum working pressure: 62 bar - Maximum air inlet pressure: 12.41 bar - Pressure ratio: 5:1 - Maximum operating temperature: 82°C - Fully inspected pre-owned product - 1-year warranty - Shipping or in-store pickup available - 21% VAT not included

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Main Features: Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Applications: Rubber and silicone compound mixing Godpjxrdgvofx Ag Eott Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20025431, year of last overhaul: 2025, nominal power: 30 kW (40.79 HP), total height: 4,500 mm, REKORD B-SSt-ex Milling Plant – Explosion Protected, with ATEX Relief Valve -Suitable for: Sugar and substitutes (such as maltitol), Salt, Sodium glutamate, Malt, Cocoa, Milk powder -For installation and operation in ATEX dust zone 22 -Built entirely in stainless steel AISI 316L COMPLIANCE -EU Machinery Directive 2006/42/EC -EU ATEX Directive 2014/34/EC -EU Food Contact Directive EGV 1935/2004 Grinding Stock: -Product: Sugar and substitutes (such as maltitol), Salt, Sodium glutamate, Malt, Cocoa, Milk powder -Feed size: ≤ 1.5 mm -Final size: 95% ≤ 20–30 µm, adjustable by speed and feed rate -Throughput: 300–500 kg/h, depending on fineness PIN MILL -Design size: 315 mm -Housing: Pressure shock resistant, swing-out door with safety interlock -Grinding elements: Pin rotor and stator -Speed: 12,000 min⁻¹ / 200 m/s -Drive motor: max. 22.5 kW; IE3 -Bearings: Heavy-duty, auto-lubricated -Seal: Labyrinth gasket with sealing gas LOADING HOPPER WITH SECURITY SIEVE & ATEX ROTARY VALVE -Volume: 100 L -Stainless steel sieve (3.15 × 0.8 mm) removes lumps and impurities -Adjustable feed rate, factory set for target throughput -Pneumatic slide gate for fast outlet control -Flame-tight rotary valve, ATEX certified -Magnetic separator under valve -Pneumatic conveying to mill AGITATED BUFFER CONTAINER WITH FILTER -Free-fall discharge from mill to 200-L ATEX buffer (70–100 kg capacity) -Equipped with agitator and level control (auto stop at fill limit) -Pressure-shock resistant, protected by flame-free relief valve -Pulse-Jet filter with differential pressure monitoring -Compressed air system (tanks, tubes, valves) included -Suction blower for continuous air transport and product flow; purified air vented outside DISCHARGE SYSTEM -Screw conveyor with frequency-regulated drive -Flame-tight discharge rotary valve (ATEX) -Outlet for bag filling up to 55 kg or cart loading UTILITIES -Power: ≈ 30 kW, 3~400 V, 50 Hz, IP 55, TN-C -Compressed air (oil/water-free): 12–15 Nm³/h, ≥ 6.1 bar Gtsdpfexql Swex Ag Ejt CONTROL UNIT -SIEMENS 15″ HMI and PLC S7-1200 -Ethernet data and error output to master control system -Remote maintenance capability -Drives: min. IP55, colour RAL 5017 -DANFOSS frequency inverters *Control cabinet installed outside explosion zone

Condition: used, functionality: fully functional, The can seamer is the machine used for hermetically sealing the lid to the can body prior to sterilization. Depending on the product, sterilization can also be done before filling. The sealing of the can is achieved by deformation and subsequent overlapping by compression of the metal layers of the Gtedjwn E U Aepfx Ag Eot can body and the lid. The result is a kind of hook between the two that achieves its hermetic union and, consequently, the tightness of the container. This sealing requires a rubber (sealing gasket) inserted in the rim of the lid to achieve the most effective bonding of the metal layers. Production will depend on the format and product to be closed. - Can close. - Centralized lubrication with pump. - Traction plate. - Siemens touch screen. - Prepared for steam injection (optional).

Condition: new, Year of construction: 2025, functionality: fully functional, cutting width (max.): 550 mm, cutting length (max.): 750 mm, type of input current: AC, warranty duration: 12 months, lifting height: 120 mm, cutting speed: 1,000 mm/min, Equipment: compressor, documentation/manual, safety light barrier, We offer a brand new, highly versatile iEcho PK0705+ digital cutting plotter. This machine is an ideal solution for prototyping and short-run production in a wide range of industries, including printing, packaging, advertising, and manufacturing. Thanks to its advanced technology, the PK0705+ handles a variety of materials with exceptional precision. Our company, Akonda.pl, is not just a dealer. We are an authorized iEcho service partner in Europe, providing professional installation, training, and ongoing technical support to ensure your machine operates at peak performance. We have successfully implemented iEcho solutions for clients outside the traditional printing industry, including manufacturers of gaskets, soundproofing materials, and machine components. Gtjdpfxsxfbu Do Ag Eet The iEcho PK0705+ is a game-changer for businesses looking to automate their finishing processes, reduce turnaround times, and expand their product offerings. Key Features of the iEcho PK0705+: - Cutting Area: 750 mm x 530 mm - Automatic Sheet Feeder: High-capacity feeder (up to 120mm stack height) for continuous, unattended operation. - CCD Camera Registration: High-precision camera system ensures accurate contour cutting of printed materials. - Versatile Tool Head: Equipped with: Oscillating Knife (EOT): For cutting materials up to 6mm thick, such as cardboard, foam board, leather, rubber, and various plastics. Drag Knives: For kiss-cutting labels, stickers, cardboard, paper (coated&uncoated) and cutting thinner materials. Creasing Wheel: For creating perfect fold lines on packaging and prototypes. Vacuum Suction Table: Securely holds material in place during cutting. Intuitive Software: Includes user-friendly software that supports QR code automation (option) for automatic file retrieval. Max Speed: Up to 1000 mm/s. Why Choose Akonda.pl? - Authorized iEcho Service Partner: We provide warranty and post-warranty service across Poland and Europe with our team of certified technicians. - Largest iEcho Warehouse in Europe: We have the largest stock of iEcho machines and spare parts in Europe, ensuring fast delivery and minimal downtime. - Expertise Beyond Print: We have extensive experience in implementing cutting solutions for diverse industrial applications. - Proven Track Record: With a skilled sales team, expert marketing, and years of experience importing from Asia, we are a reliable partner for your business growth. - Visit Our Warehouse - We Have the Machine for You! We are proud to maintain what is likely the largest iEcho machine warehouse in Europe. We have the following models in stock and ready for demonstration or immediate delivery: iEcho PK 0604: 60x40 cm cutting area, drag knives, creasing wheel, CCD camera. iEcho PK 0604+: 60x40 cm cutting area, adds an oscillating knife. iEcho PK 0705+: 73x55 cm cutting area, drag knives, creasing wheel, CCD camera, oscillating knife. iEcho PK 1209: 120x90 cm cutting area, adds an active knife to the standard toolset. iEcho PK4 1007: 100x70 cm cutting area, features a free toolhead for expanded capabilities. iEcho PK4 0912: 90x120 cm (width) cutting area, also with a free toolhead. Large Format Models: We also stock the industrial TK4s and BK4s series in sizes 250x160 cm and 320x210 cm for heavy-duty production.

Year of construction: 2020, condition: new, Gravity heating system Thanks to the use of a gravity heating system in SPARK series gravity furnaces, we can boast of a good result of temperature homogeneity, our tests have shown that the air temperature uniformity in our gravity furnaces, with the appropriate arrangement of elements, does not exceed ± 5 ° C! We owe the result to our heating element assembly technology. Gtedpfefy T R Dex Ag Ejt Rapid heating SPARK series gravity furnaces have specially designed heaters that quickly give off heat, thanks to which our furnaces heat up quickly. We owe rapid heating to the applied seals and insulations, the specially profiled gasket does not contain asbestos and is safe for the user. Optimization of the insulation, no contact between the furnace chamber and the casing minimizes heat loss and saves power. Depending on the model, our furnaces heat up to 8 ° C per minute. Transport system The SPARK series ovens are equipped with two bottom transport carriages as standard. In response to the market demand for inexpensive solutions, we have developed a manual bottom transport system that allows you to transport large dimensions with a minimum of force. Our system allows for optimal use of the entire surface of the furnace and ensures high cleanliness of the painted elements. Thanks to the use of two trolleys, the trolley moving around the hall does not contaminate the interior of the furnace. The top trolley is used to enter the furnace itself. The use of one trolley causes the introduction of contaminants from the floor into the furnace chamber, our system eliminates this problem.

Condition: like new (used), - Brand: Graco Gtodpfx Agov S Dzdj Ejt - Reference: CM1145 - General Industry - Application: Bonding, Sealing, PVC, Gaskets, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 3.4 L/min - Maximum working pressure: 276 bar - Maximum air inlet pressure: 8.62 bar - Pressure ratio: 40:1 - For 20 L drums - Maximum operating temperature: 49°C - Fully inspected pre-owned product - 1-year warranty (Except for electric machines and non-Graco products) - Shipping or in-store pickup available - 21% VAT not included - VAT included. A VAT refund may be requested for VIES-registered companies or those with a TAX ID. - Customs and tariff fees are the buyer's responsibility in the case of imports

Condition: refurbished (used), Carpigiani specialized service 100% refurbished machine. New pumps, complete gasket set, new knife, practically new machine. Pasteurization function, 2+1 flavor, 2x20 liter tank, 65kg/h capacity, air cooled. 2 pcs available. Gtodpfjwi U N Sox Ag Eet

Condition: new, Equipment: ABS, TECNOKAR SUPERTOP F1 6900 - AXLES: Single axle 9 tons, twin axles 12 tons. R22.5 - AXLE CONFIGURATION: 1st axle liftable and self-steering, 2nd and 3rd fixed - VOLUME: 28 m³ - BODY STRUCTURE MATERIAL: Standard in DOMEX - FLOOR PLATE MATERIAL: Wear-resistant steel, hardness HB 450 - FLOOR PLATE THICKNESS: 6 mm - SIDE PANEL MATERIAL: Wear-resistant steel, hardness HB 450 - SIDE PANEL THICKNESS: 4 mm - REAR: High yield strength steel - TYPE OF REAR DOOR: Hinged with gasket and locking rods, full hydraulic opening - REAR DOOR VERSION: Recessed into the body - HYDRAULIC OPENING VERSION: With exposed arms and protective wedges - REAR DOOR LOCKING: With side hooks, hydraulic - DOUBLE ANTI-JAM HINGE SYSTEM: Yes - SEALING TYPE: With gasket on the body and 5 locking turnbuckles - REAR OVERHANG: With extension for screed flush with the floor - SHAPED SADDLE: No - TYPE OF COVER: Cramaro - COVER HEIGHT: 400 mm Standard Equipment and Accessories: - MANUAL LOCKING FOR STEERING AXLE - REVERSE BUZZER - SPEED LIMITER DISCS - ECOLED II LED REAR LIGHTS - MANOMETER FOR PRESSURE AND THEREFORE PAYLOAD READING - PAIR OF REAR TOW EYES - MANUALLY REVERSIBLE BUMPER WITH ROUND UNDER-RUN BAR - FAST UNLOADING SYSTEM - ANTI-VIBRATION RUBBER BUFFERS - TPMS TIRE PRESSURE MONITORING SYSTEM - SAF OSCILLATING RETRACTABLE LANDING GEARS - SINGLE REMOTE CONTROL FOR ELECTRIC COVER AND VIBRATOR - UNDERBODY VIBRATOR - 10x 9.00 R 22.5 ALCOA DURA BRIGHT ULTRA ONE ALLOY WHEELS - 10x CONTINENTAL 315/80 R 22.5 TIRES POSSIBILITY OF TAILORED FINANCING OR LEASING AT OUR PREMISES. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30 AM – 7:00 PM / SATURDAY 8:30 AM – 2:00 PM Gedpfx Agevzh Ugo Estt WE OFFER A HUGE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet – Schmitz Isuzu - Flatbed – Crane – Tipper – 4 axles – 4 Rear Axles – Tway-T-Way-540-460 HP – Xway-X-Way-Three-way – V8 – Scania – Frost Edition Curtain-sided – Box – Side Loader – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines any responsibility for any discrepancies in equipment, options, and features which may in some cases differ from what is described. Please verify the specifications of the specific vehicle.

Condition: used, functionality: fully functional, The can seamer is the machine used for hermetically sealing the lid to the can body prior to sterilization. Depending on the product, sterilization can also be done before filling. The sealing of the can is achieved by deformation and subsequent overlapping by compression of the metal layers of the can body and the lid. The result is a kind of hook between the two that achieves its hermetic union and, consequently, the tightness of the container. This sealing requires a rubber (sealing gasket) inserted in the rim of the lid to achieve the most effective bonding of the metal layers. * Production may vary depending on the format and product to be closed. * Incorporates steam injection. Gtodpfx Agjwn Dmds Eet Features FMC 652 Seamer: -Almospheric/Steam injection. -Geared rotary can seamer. -Integrated head. -Normal lid / Easy open lid. -Can feeding by straight infeed. -Cans diameter min/max: 52.4 - 108 mm. -Cans height min/max: 28-190 mm.

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 4,080 mm, travel distance Y-axis: 2,040 mm, travel distance Z-axis: 200 mm, controller manufacturer: FlexiCAM Advanced Control System, 3D computerized routing system, work area 4,080 x 2,040 mm. Powerful closed-loop servo motors on all axes. Spindle with automatic tool changer (ATC). Max. power 8 kW (S6), variable 2,000–24,000 RPM, ISO 30 tool holder with ER 32 collets. Max. tool diameter 26 mm (ER-40). ATC system with up to 20 positions. Dust extraction unit for automatic tool change systems. High-pressure vacuum table: 8 zones, individually valved, phenolic worktable with grid for gasket. Dry-running high-pressure vacuum pump 7.8 / 9 kW (10 / 12 hp). 250 m3/h / 147 cfm (50 Hz) or 300 m3/h / 177 cfm (60 Hz), includes dust filter, on/off switch, and overload protection. Gedpew Ap Rwsfx Ag Ejtt