Diesel tank 10.000 liter Diesel pump

Year of construction

2005

Condition

Used

Location

Warstein

Show map

Machine data

Machine type:: Diesel tank 10.000 liter Diesel pump

Year of construction:: 2005

Condition:: used

Price & Location

Location:: Enkerbruch 2, 59581 Warstein, Deutschland

Call

Details about the offer

Listing ID:: A2465053

Update:: 23.05.2024

Description

Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act

Dear Sir or Madam, we offer a 10,000 liter double-walled storage tank for the storage of diesel as follows . Nominal capacity 10 cbm

Piece 1

used but reconditioned, i.e. the tank is cleaned, refurbished, primed and painted

Color equipment lacquer RAL ; . However, you can always bring your own color wishes.

Material steel in steel, material S235JRG2

Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate

Piece. 1 Dipstick

Piece. 1 venting piece

piece. 1 Filling nozzle

piece. 1 new limit switch

piece. 1 new leak detection sighting device with filled up leak liquid

piece. 1 ladder

piece. 1 suction line

Form . cylindrical storage tank with feet/console

tank mass length ca 5.300 mm plus diesel pump 500 mm

diameter approx. 1.600 mm

Weight approx. 2,000 kg

Storage above ground

Compact diesel dispenser Vision 60 (new) Hose length 4 mtr . On request also longer .

Approved automatic nozzle .

Pump 230 Volt max 55 Ltr/min. on request also in 70Liter min.

All our tank systems can also be offered without diesel pump .

Top in the offer . Liquid fertilizer - AHL tank plants in the size of 10,000-100,000 liters.

Of course, you can also design your tank plant!

All our plants are designed in our company by selected employees

extensively controlled and checked.

We also offer an inexpensive delivery on request.

The inspection of our plants is possible at any time.

Further tank facilities for above ground as well as underground storage are available in all sizes and are for sale on our premises.

Price/ Shipping

The price for the filling station is valid from the location Warstein , free loaded.

Delivery can be offered at a reasonable price for an additional charge.

Delivery time = immediately

Fpsdpecnik Sjfx Ag Ded

You will receive an invoice with VAT.

In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away.

With kind regards
from Warstein
Tank Environmental Protection Wozniack

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

36 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Nordrhein-Westfalen

1,105 km

CNC lathe
GILDEMEISTERSPRINT 65 Linear

€21,700

To the auction

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Z2 travel: 150 mm X3 travel: 165 mm Z3 travel: 650 mm Y3 travel: 80 (+50/-30) mm Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT Fjdoymmdbjpfx Ag Dopd C-axis Y-axis Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

See details

Listing

Multiprocess welding machine 500 Amp GYS NEOMIG -i 500 G

Concordia Sagittaria

1,733 km

Multiprocess welding machine 500 Amp
GYSNEOMIG -i 500 G

Call

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS Fpjdpfx Agsmxkdpj Dsd MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

See details

Auction

Thread milling machine SCHIESS-KOPP FK 12.32 CNC

Baden-Württemberg

1,257 km

Thread milling machine
SCHIESS-KOPPFK 12.32 CNC

€7,500

To the auction

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Fpedpfx Ageyl U Tuo Djd Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

See details

Auction

Bayern

1,569 km

Milling machine
Geiss2000 x 1000

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 9520190, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 30,000 rpm, overall weight: 3,300 kg, In July 2025, the drive module, hard disk module, PLC card, and the screen module with keyboard were replaced at a cost of €24,000. Fsdpfx Aoymmtvog Depd A replacement spindle can be purchased separately for €4,000. TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 560 mm Spindle speed: 30,000 rpm MACHINE DETAILS Interface: USB WiN PCIN Control: Siemens Sinumerik 840 C Weight: 3,300 kg Voltage: 380 V 50 Hz Rated current: 38 A EQUIPMENT Central lubrication system

See details

Listing

Tipper truck MAN 41.480TGA KIPPER 18cbm 8x6 40Ton

Lonato del Garda

1,612 km

Tipper truck
MAN41.480TGA KIPPER 18cbm 8x6 40Ton

Call

Condition: like new (used), functionality: fully functional, mileage: 487,900 km, power: 353 kW (479.95 HP), fuel type: diesel, maximum load weight: 40,000 kg, overall weight: 56,000 kg, axle configuration: 8x6, fuel: diesel, fuel tank capacity: 600 l, brakes: intarder, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2006, operation weight: 20,900 kg, shovel volume: 18 m³, Equipment: ABS, additional headlights, air conditioning, differential lock, hydraulics, retarder, trailer coupling, MAN 41.480TGA 18 cbm Tipper 8x6 Differential lock Leaf suspension 13T planetary axles ZF manual transmission ZF intarder Fpedpjxf Iw Ejfx Ag Dsd Euro 3 Gross vehicle weight 40,000 kg - Payload 20,900 kg Tow hitch Truck total length 9.04 m Wheelbase 4.90 m Tyres 30% 600L tank Sun visor Fog lights Round headlights Central locking Air conditioning Refrigerator in cabin ABS All information subject to change/errors excepted.

See details

Auction

Nordrhein-Westfalen

1,023 km

Universal machining center
OKKVC-X350

€17,500

To the auction

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: MAJ5117A, controller model: FANUC F31i-B5, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, The machine was in use until it was decommissioned in 2024. The cab door and the 5th axis are not functioning properly. The fault has not been further diagnosed. The original purchase price of the machine was EUR 265,000! TECHNICAL DETAILS Spindle speed: 12,000 rpm Tool holder: BT40 BigPlus Tool positions: 60 MACHINE DETAILS Fpodpsymbz Iefx Ag Djd Control: FANUC F31i-B5 Coolant pressure (IKZ): 70 bar EQUIPMENT: IKZ 5 axes with chuck

See details

Auction

Universal machining center POS POSmill H 800 U

Nordrhein-Westfalen

1,023 km

Universal machining center
POSPOSmill H 800 U

€175,000

To the auction

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Spindle operating hours: 11,514 h Coolant supply: 40 bar MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Fpjdpjymbb Iofx Ag Dod Full load current: 125 A Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Net weight: 20,000 kg Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

See details

Listing

City bus BERKHOF AMBASSADOR 200 * ANALOGTACHO *KLIMA *

Babenhausen

1,245 km

City bus
BERKHOFAMBASSADOR 200 * ANALOGTACHO *KLIMA *

€3,990

Fixed price VAT not applicable

Call

Condition: used, mileage: 673,000 km, power: 158 kW (214.82 HP), first registration: 12/2003, fuel type: diesel, number of seats: 40, gearing type: automatic, next inspection (TÜV): 04/2019, emission class: euro3, color: red, brakes: retarder, Equipment: ABS, air conditioning, parking heater, VDL BERKHOF AMBASSADOR 200 – ANALOG TACHOGRAPH DEFECTIVE VERY LONG PERIOD OUT OF OPERATION! * DIESEL PUMP DEFECTIVE * STARTER NEW * HIGH-PRESSURE PUMP NEW * ALL INSPECTIONS NEW * AUTOMATIC TRANSMISSION * RETARDER/INTARDER AUTOMATIC * THERMOKING AIR CONDITIONING * LIFT & LOWERING FUNCTION * MICROPHONES * ANALOG TACHOGRAPH * SEATS: 40 * STANDING PLACES: 41 * STROLLER SPACE * WHEELCHAIR SPACE * WHEELCHAIR RAMP (MECHANICAL) * EXTRA-WIDE CENTER DOOR * VEHICLE DIMENSIONS: * LENGTH: 11.95 M * WIDTH: 2.50 M * HEIGHT: 3.09 M * CUMMINS ENGINE * GERMAN VEHICLE * AVAILABLE IMMEDIATELY * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 – €2,000) Fsdefdt Rbopfx Ag Depd VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID Subject to changes, errors, and prior sale! You can find more vehicles on our website. Sales exclusively according to our General Terms & Conditions—see homepage For sales to EU & third countries, a deposit of at least €500.00 / €1,000.00 will be required. PLEASE NOTE: ON SOME VEHICLES, SIGNAGE/DECALS HAVE BEEN REMOVED IN PHOTOS USING PHOTOSHOP

See details

Auction

Vertical machining center Doosan VC 630/5AX

Nordrhein-Westfalen

1,023 km

Vertical machining center
DoosanVC 630/5AX

€15,000

To the auction

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Rated power: 53.3 kVA Interrupting capacity: 5 kA Full load current: 84.1 A Short-circuit capacity: 10 kA Fpjdpfxoyma H Ne Ag Dsd Weight: 12,500 kg EQUIPMENT Documentation/manual Chip conveyor

See details

Auction

Nordrhein-Westfalen

1,023 km

Lathe
BuffaloBNC-2660X

€6,000

To the auction

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 1511151394, turning length: 1,500 mm, turning diameter: 650 mm, spindle bore: 82 mm, spindle speed (max.): 2,400 rpm, overall weight: 4,300 kg, The machine was used without any restrictions or known defects until it was decommissioned. The original purchase price of the machine was EUR 79,000! TECHNICAL DETAILS Turning length: 1,500 mm Turning diameter: 650 mm Spindle bore: 82 mm Spindle speed range: 80 - 2,400 rpm MACHINE DETAILS Weight: 4,300 kg Drive power: 35 kVA Frequency: 50 Hz Full load current: 52 A Fpjdpfeymay Aox Ag Dsd Number of phases: 3 + PE Short-circuit protection: 25 kA Nominal voltage: 400 V Max. load current: 520 A EQUIPMENT Documentation / Manual

See details

Listing

Genie GS-1932e NEXT GENERATION electric scissor lift Genie GS 1932 E-Drive NEXT GENERATION

Dortmund

1,092 km

Genie GS-1932e NEXT GENERATION electric scissor lift
GenieGS 1932 E-Drive NEXT GENERATION

Call

Auction

Bagging plant DS Schüttguttechnik Bottom Up Bagging System

Baden-Württemberg

1,310 km

Bagging plant
DS SchüttguttechnikBottom Up Bagging System

€75,000

To the auction

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging system. The system was purchased in 2024, has been dismantled, repackaged, and has never been operated. The original purchase price was €235,000! TECHNICAL DETAILS (according to the manufacturer) Performance: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag material: Paper (2–5 layers) with PE inner liner or PE Weighing range: 10–30 kg Weighing accuracy: 2 Sigma +50g/–0g Weighing accuracy: compliant with PTB MACHINE DETAILS Footprint: (approx.) 20 x 4 m Control voltage: 400 V, 50 Hz – 24 DC, 3 phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors/Gearboxes: SEW Pneumatic components: Festo Material: Stainless steel DIN 1.4301 Cable tray: Brand Cablofill Protection rating: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21, 500–1000 mm radius, zone 22 Fpedpfeymxtzjx Ag Djd Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air requirement: 400 Nl/min Protection class: IP54 Aspiration air: 45 m³/min Note: Additional technical data can be found in the attached order confirmation.

See details

Auction

Nordrhein-Westfalen

1,103 km

Rod machining center
ElumatecSBZ 130

€500

To the auction

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rotational speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 480 mm Z-axis travel: 325 mm Fodeypbmiopfx Ag Dspd Max. spindle speed: 15,000 rpm Spindle power: 5.5 kW Tool holder: BT 30 MACHINE DETAILS Tool changer: 8 positions EQUIPMENT Tools

See details

Listing

CNC HEAVY DUTY PLASMA CUTTING MACHINE VOORTMAN V304

Wellingborough

521 km

CNC HEAVY DUTY PLASMA CUTTING MACHINE
VOORTMANV304

Call

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord. Fsdpfx Agetp Dhpo Dopd  Year of build: 2013.

See details

Auction

Rheinland-Pfalz

1,163 km

Decanter
GEACF 3000

€55,000

To the auction

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg Fodpfxjymx N As Ag Dopd EQUIPMENT Temperature sensors on both drum bearings Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

See details

Advertise here