Used Formwork Panels for sale (11,084)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 14823, workpiece height (max.): 80 mm, working width: 1,400 mm, No minimum price – guaranteed sale to the highest bidder! Cajdoxx Szuopfx Abbea TECHNICAL DETAILS Maximum working width: 1,400 mm Machine length: 1,500 mm Panel thickness: 3 – 80 mm MACHINE DETAILS Machine length: 1,500 mm EQUIPMENT Variable feed speed Control panel Dosing unit (chromed steel dosing roller) Spreader unit (rubber-coated roller) Motorized conveyor belt Built-in control panel and operating elements

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Cajdpfxexy Ng Rj Abbja Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz Caedpsx A Tzqofx Abbea EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: ready for operation (used), Year of construction: 2007, Selco EB70L Beam Saw Cutting length 4300 mm Cutting width 4400 mm Max. saw blade protection 70 mm Cajdpfx Aex A Eyrjbboa Saw blade diameter 300 mm

Year of construction: 2024, operating hours: 15 h, condition: like new (used), functionality: fully functional, Imported from china to the uk 2025. Upgraded power, control and control panel wiring to UK/Eu specifications. Brand new and comissioned. fully automated and fully adjustable output to a maximum of 15meters per minute. Saftey pull cord and E stop system installed Csdpfexl U Scox Abbsaa

Condition: used, Used GEA Westfalia model FSD 1-06-107 stainless steel disc bowl centrifuge. Clarifier design with total capacity 1 litre and solids holding space 0.5 litre. Heavy liquid 1.0 kg/dm3 and solids 1.4 kg/dm3 solids. Maximum speed rated 10,000rpm. Centripetal pump output up to 300 l/h depending on medium. Belt driven by 1.1 kW 220/380 volt 3/50 3,000 rpm motor. Mounted on skid with HMI control panel and stainless steel collection pot. New 2018. Caodpfx Aex Dgbgebbea

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AL/008514, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 3,000 mm, empty load weight: 2,800 kg, TECHNICAL DETAILS Working area: 3,000 x 1,000 mm Max. workpiece height: 60 mm Upper Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW Lower Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW 2 panel gripper clamps Manual loading of parts onto the Flotex table Automatic part unloading Automatic lubrication Safety screens EU regulations MACHINE DETAILS Control: PC and Xilog Plus software Weight: 2,800 kg Electrical Data Cjdoxx Sg Dopfx Abbeaa Rated voltage: 400 V Phases: 3+N Rated current: 49 A Frequency: 50 Hz Short-circuit rating: 10 kA

Condition: ready for operation (used), functionality: unexamined, A good used B&R Touchscreen control panel from a Cintex Checkweigher - came out of working machine Cajdpfx Abjwzvmiebja Ready to ship worldwide We look after export documentation and shipping if required

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, pass-through height: 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Csdpfxewnr A He Abbjaa Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, Cincinnati 5FL12 Hydraulic Shear with Elgo Electric P8511 Control Panel DRO, Rear Haul Off Conveyor, Powered Back Gauge, 5/8" Capacity Mild Steel (16m), Bed Width 3800mm. S/No. 33K27 Caodpfx Aox Agibobboa Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2009, Ref:10891 . 2009 ODM ‘Sticker’ Casing-in Machine + ‘Smasher’ Press. For casing-in & pressing a variety of thin to thick books into flexible or hard cases. ODM ‘Sticker’ Features:- • Easy to use control panel. • Very short set-up and strip down times. • Self-adjusting machine requires no make-ready for different case sizes. • Integral twin glue tanks, easily removed for quick cleaning. • Vacuum cover guide for accurate placement of the spine*. Hand feed of book block Vertical wing action Twin PVA cold glue tanks/application rollers Manual feed of case* ODM ‘Smasher’ Self-adjusting hydraulic pressing & building-in machine. Features:- • Easy to use control panel. • Foot pedal operated pre-set to locate the joint area of the book. • Dual hand button operation for operator safety. • 10 tons of pressure for highly compressed books. • Adjustable dwell timing for pressure duration and heating forming. • Thermostatic control of heated joint forming irons. Specification: Sizes, Max: 280 x 355 mm Min: 100 x 100 mm Book thickness : 1 - 100 mm Mechanical speed, Max: 100 - 400 books/hr. (series production) Caodpou Tky Rofx Abbsa Max: 100 - 200 books/hr. (one-off production)

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Codpfx Asx Dgapjbboaa

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-250-12-2554, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, TECHNICAL DETAILS Minimum part dimensions (X, Y, Z): 250 mm x 100 mm x 8 mm Maximum workpiece dimensions (X, Y, Z): 3,000 mm x 1,000 mm x 80 mm Upper vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Cajdpfoxx R Slsx Abboa Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) Lower vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS CNC control: PC 85 Software: woodWOP 6 Electrical data Voltage: 380 V Frequency: 60 Hz Phases: 3 Power: 62 kW Current: 125 A Control voltage: 24 V EQUIPMENT Simultaneous processing of two panels Safety enclosure for the working head No. 2 clamps for fixing and moving the workpiece Loading station with air cushion Discharge of panel(s) via motorized roller conveyor Safety system with perimeter fencing and front safety mats

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, Harris TGS57 - fully refurbished. Baler complete with drive, hydraulic pumps, valves, motors and complete piping. Electric control consisting of the main control panel, control desk. Circulating pump, filter and cooling system. Codpfx Abevmf Nrebeaa

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Casdjx Df U Eopfx Abboa

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 155 mm Number of work zones: 2 Drilling Head Vertical spindles X-axis: 10 Vertical spindles Y-axis: 12 Horizontal spindles X-axis: 6 Horizontal spindles Y-axis: 2 MACHINE DETAILS Electrical Data Power: 20 kW Voltage: 380 V Current: 25 A Frequency: 50 Hz EQUIPMENT Vertical electrospindle with C-axis vector, automatic tool changer, ISO 30 taper Automatic tool change system with 3 side-mounted positions for aggregates Automatic tool change system with 20 positions and chain 8 manually adjustable bars for suction cup holders with display 3 manually adjustable suction cups per bar 8 pneumatically actuated Bakelite bars for panel lifting Perimeter safety fence Cajdoxx Rz Topfx Abboa Motorized conveyor belt for chip extraction Vacuum pump

Condition: used, Unused DGM Environmental Technologies model DGH 500/600 granulator. Has approximately 636mm x 615mm feed opening. Unit has (5x2) knives fitted to rotor which measures approximately 500mm diameter x 600mm wide. Includes (2) stator knives and (1) block knife for wedge. Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 0.75kw, 400volt, 50hz, 1383rpm motor. Includes double bag off system with 7.5kw blower. Unit includes control panel. Also includes spare blades, rotor, stator and block. Cedpfox Dfm Uex Abbjaa

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 14 m/min, workpiece height (max.): 55 mm, controller model: TS 200 Touchscreen, TECHNICAL DETAILS Panel height: 55 mm Solid wood: 8 mm PVC/ABS thickness: 0.4–3 mm Feed speed: 14 m/min Cjdpfx Absxxy Hfsbeaa MACHINE DETAILS Control: TS 200 touchscreen EQUIPMENT Guide rail for panel insertion Side roller conveyor with idler wheels Roller holder plate Glue unit for EVA hot-melt adhesive with glue pot Edge pressure group for straight profiles with adjustable pressure rollers End cutting unit with 2 motors and tilt adjustment Fine trimming/trimming unit with 2 tilting motors Corner rounding unit with 2 multifunctional motors (Gleaner + Rounder) Edge scraper group Glue scraper group Brush unit Adjustable working height

Condition: used, Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which measures approximately 600mm diameter x 800mm wide. Includes (2) stator knives and (2) block knives for wedge. Unit is driven by 75kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 1.5kw, 400volt, 50hz, 1400rpm motor. Includes double bag off system with 7.5kw blower, spare knives and (1) spare screen. Unit includes control panel. Caedpox Dfm Iefx Abbsa

Condition: used, Comprehensively tested, used Winkworth reportedly model GU660 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel Capacity: 660 litre (product dependent) Mixing trough: 1,750mm long x 700mm wide x 790mm deep Discharge Type: air operated discharge value Type Of Blades: single interupted ribbon Motor: 7.5kw, 1450rpm, 415volt, 3/50 motor through Opperman type HTM7 gearbox rated 38.2/1 reduction rated, 37rpm output. Also includes: Hinged lid with clamps. -Control panel with castell key interlock. -Mild steel mobile base. A video of this mixer is available below. Specifications: Capacity: 23.3 ft³ Material of construction: Stainless steel Width: 27.56" Casdox Dd Dljpfx Abbsa Horsepower: 10 hp Length: 68.9" Dimensions: 68.90in x 27.56in x 31.10in

Condition: used, Used Netzsch model LMZ2 stainless steel bead mill with associated parts. Unit has stainless steel peg style rotor and stainless steel jacketed chamber. Unit driven by 7.5hp, 230/460volt, 1770rpm, 3/60 electric motor with transformer. Unit includes mechanical seal. Approximately 2 litre capacity. Unit includes feed pump and control panel. All mounted on stainless steel base. Caedpjx Ddxpofx Abboa

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. Caedpfx Absxyxytoboa This unit is ready to run. A video of this mixer is available below.

Condition: used, Used Flottweg model Z23-4-441 stainless steel Tricanter centrifuge. Maximum bowl speed 5,500rpm. Sediment density 2.9kg/dm3. Maximum tempurature 100 deg.c. Main drive rated 11kw/13kw, 50/60hz, 2929 to 3524RPM. Back-drive rated 4kw/4.6kw, 50/60hz, 2900 to 3480RPM. Unit includes main control panel with local control panel. Specifications: Codpfoxyxk Ssx Abbeaa Material Of Construction: Stainless Steel Motor Power: 11 hp Max Bowl Speed: 5,500 RPM Size: Z23-4-441 Conveyor Material: Stainless Steel

Condition: used, Used BCH stainless steel jacketed sigma mixer / extruder. Approximate working capacity 100 litre (product dependent) with maximum total capacity 250 litre. 304 Stainless steel mixing chamber measures approximately 720mm Long x 780mm Wide x 700mm Deep. Internal rated 100 mbar (90% Vacuum) design pressure at 150 deg.c. External 304 stainless steel jacket rated 6.8 bar design pressure at 170 deg.c. Has (2) 304 stainless steel Sigma blades driven by (2) 4kw motors with gearboxes. 304 Stainless steel screw discharge driven by 4kw motor with gearbox. Unit air operated hinged lid. Includes control panel. Codpfxsxxh Rlo Abbsaa

Condition: used, Used STEPHAN stainless steel cutter type UMM/SK40E PILOTE-No. 4418598. Capacity 40 litre. Stainless steel tilting vessel with double jacket. Driven by a Hp 10 - Rpm 1500/3000 - 380 volt motor. -Electric control panel - scraper with motor Cjdpox Dduqsfx Abbeaa