Used Forging Manipulators for sale (452)

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel Hfodpfxsxabhme Afnoc - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible Hfodpoxacdvofx Afnsc - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, pressure 80.0 t Hfedpoxabhasfx Afnsc stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm Hfodpsxabtvjfx Afnjc total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Hodpfocuxpqex Afnefc Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: Hfsdpfowhxiaox Afnec 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 29,000 h, Cloos welding robot system consisting of: ROMAT 350 robot with ROTROL II V4 control unit (optionally upgradable to version 2025), gas nozzle sensor, arc seam tracking, point editor, Qineo Puls 600 welding machine (600 A), wire feeder, MRW 510 evo welding torch, torch hose package, mechanical cleaning system, pressure amplifier. 1 L manipulator WPEK 25000, load capacity 2500 kg, turning radius 1500 mm, loading height 945 mm. Hodpfx Asw Razzofnefc 1 C stand with vertical slide, travel distance 1500 mm, boom length 2750 mm. Light barrier, start preselection. The system is in excellent condition and was only used for simple TIG welding tasks. Overhauled and serviced prior to delivery.

Condition: like new (used), Year of construction: 2020, operating hours: 2,900 h, functionality: fully functional, cloos robot Qirox 350 incl. control QC 2 touch sensor, seam tracking, point editor rotary gallow Hfodox Iu R Hjpfx Afnec welding machine cloos qineo puls 451, wirde drive, torch, torch hose package 2 light beams, 2 start pre selections manipulators on request

Condition: like new (used), Year of construction: 2022, Stierli- ROTATOR 600 / 6 to Hjdjgqgb Uepfx Afnjfc 360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc.... Capacity: 6 tons Swing circle diameter: 600mm (e.g. beam HEB 600) Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck) Adjustment of working height: Steplessly adjustable The Stierli rotator was developed to turn heavy and large loads such as beams and welded constructions quickly and safely without a crane. This saves you a lot of working time and increases productivity. This welding positioner or welding manipulator works as a lifting turning device with reliable chains. The turning device is not only used for beam welding, but other cross sections can also be turned with it, such as the use as a pipe turning device. Loading is impressively simple with the overhead crane, or by means of forklift loading. The rotator can be brought into position very easily with the hand pallet truck, whereby the distance between the uprights of this welding device is freely selectable.

Condition: used, This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl Dims 33cm (D) x 28cm (W) x 14cm (H) Listing: Raymond A Lamb E65 Paraffin Section Floating Out Bath Hsdpfx Asxzhtrofnsfc

Year of construction: 2002, condition: excellent (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Hsdeydll Sspfx Afnofc All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg Hjdpfx Asydllljfnofc - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: good (used), Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V -Dimensions: 1000/550/H1200 mm Hfsdpfxjcvpuao Afnjc -Weight: 120 kg

Year of construction: 2024, condition: used, Seppi M. BMS 125 Forestry Mulcher / incl. Rotator / Year of manufacture: 2024 / DEMO unit / in stock & immediately available / excellent condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Hfsdpoyfvbgofx Afnec Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power line corridors - Mulches shrubs and wood up to 30 cm in diameter - Suitable for excavators from 13 to 30 t - For mounting to various quick coupler plates - Designed for hydraulic motor drive depending on the carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced double-walled chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Chain protection at the front - Chain protection at the rear - Sandwich-type skid shoes, height adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST inclined-axis piston motor - with automatic displacement regulation 60-80 cm³ and overpressure valve - displacement in cm³ (min-max): 60-80 - required pressure in bar (min-max): 200-350 - required hydraulic oil flow: 80-170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for rear hood opening Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net 3 hydraulic lines required for rotor: supply, return, and drain. An additional hydraulic circuit is required for the hood. Unit is supplied without hoses or couplers. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We carry a very large selection of various Seppi M. products available from stock! Mr. Herden (Tel. ...) will be happy to assist you. Financing offer available upon request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni Telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We deliver the complete Seppi M. product range for you! Errors excepted...

Condition: as good as new (ex-display), The AHK M 1230 NC incl. AKAS – LC II M is a highly efficient press brake designed for sheet metal processing, offering a modern and cost-effective NC solution for bending tasks. This robust machine combines advanced technology with safety features, allowing for user-friendly operation without the need for CNC programming. Built from stress-relieved welded steel, the AHK M series provides a rigid frame and hydraulic system, which ensures precise upper beam positioning through a torsion shaft connected to the depth stops. Operators can easily manipulate the back gauge in the X- and R-axes via a touchscreen or access stored bending sequences for automatic operations. This model is ideal for producing workpieces with consistent materials and shapes, while its manual quick-action clamping system significantly reduces tool change times. Complimented by features such as an emergency stop switch and a reliable optical safety system, the AHK M 1230 NC press brake is engineered for high productivity and safety. For those looking for a superior press brake, request a quote today and enhance your sheet metal processing capabilities. Hfodpsv Rbv Ajfx Afnsc

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: C1210000251, Yxlon Multiplex 5500 M – Industrial X-Ray & CT Inspection System The Yxlon Multiplex 5500 M is a powerful, fully digital X-ray inspection system for non-destructive material testing (NDT/NDE). It is ideally suited for applications in the automotive, aerospace, electronics manufacturing industries, as well as for cast and structural components. The system offers precise 2D radioscopy and can optionally be upgraded to a fully-featured 3D computed tomography (CT) system. Main Features • Fully digital X-ray system with HDR radioscopy and CT option • Automatic Defect Recognition (ADR) integrable • Ideal for steel, aluminum, ceramics, and plastics • High resolution via CCD camera + image intensifier • Intuitive operation via central control console • High throughput for serial inspections Technical Data (Y.Multiplex 5500 M) Inspection Chamber & Capacity • Maximum part size: Ø 600 mm, 900 mm height • Maximum part weight: 60 kg • Typical throughput: 30 s for 6 positions System Data • Cabin height: approx. 2650 mm • Cabin width: approx. 2650 mm • Cabin depth: approx. 1900 mm • Total cabin weight: approx. 6500 kg • Operator console: approx. 250 kg Electrical & Power • Power supply: 3 × 230/400 V, 50 Hz • Power consumption: approx. 4.5 kVA Hfjdpfx Afjyg Iqvjnjc • Main fuse: 40 A slow-blow Detector Technology • Active area: 204.8 × 204.8 mm • Pixel matrix: 1000 × 1000 active • Pixel size: 200 µm • Energy: 40 – 225 kV Manipulation & Axes • Multiple automatic/manual axes (4–7 depending on model) • U-arm manipulator for flexible positioning Condition & Applications Thanks to its modular design, reliable Siemens drives, and high-quality X-ray technology, the Yxlon Multiplex 5500 M provides a durable, precise, and efficient inspection platform. Ideally suited for: • Serial inspection & inline quality control • CT analysis of internal structures • Analysis of casting and porosity • Electronics and solder joint inspection • Aerospace and automotive components Scope of Supply • Complete Yxlon Multiplex 5500 M X-ray system • Operator console • X-ray detector incl. image intensifier • Siemens drive & control technology • Original operating manual

Condition: new, Year of construction: 2025, machine/vehicle number: 618621425, Marini Magnum 140 mobile asphalt mixing plant year: NEW capacity: up to 140 t./h 1 year guarantee - calorific power of the fuel 9,600 kcal / kg, - material passing through the #8 (2,38mm) sieve is no more than 20%, - The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system. - Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support. Hedjhd I T Sjpfx Afnofc Quadruple feed bin (two-by-two) with 3,80mm wide opening and a capacity of 6m3, completely designed to support the strains during the unloading of materials. Regulated floodgate for flow of aggregates. - Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins. - Feeding belts with 20\" wide canvas supported by 4\" rollers in \"V\" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by an electric motor. - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp. - rotational external mixer - burner with fuel spraying by gear pump Kcal/h - Dry filtering system that consists of dust collecting system - Control system Sistex Other options and accessories Control system, control room, dust filter/dust collector Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, Friction press, flywheel press, forging press, screw press, used machine Manufacturer: ASJ Type: J53-160B Overall dimensions: Width: 1850 mm Depth: 1380 mm Height: 3140 mm Weight: 8190 kg Table size: 560 × 510 mm Clear opening without table: 560 × 560 mm Hsdpsxpf U Ajfx Afnefc Clear opening with table: 260 mm Nominal pressure: 160 tons Stroke length: 360 mm

Year of construction: 2022, condition: new, New WRC, performance by black series Combination of high -tech equipment with frequency contolled motors and movements. Main motor 30 kW or 37 kW or 45 kW Soft start & stop starting Boards pushing hand with adjustable hight & additional side holders Pressurized blade guidances with oil mist cooling Hjdpfx Afjfm Urtsnefc Automatical oil and grease lubricating Tracking precutter Robust and raised rails with automatical waste cleaners All possible equipment for manipulating with log; movable logturners, patented fast log & prism turners, 2 levels of log grippers Separated self standing control panel with seat and 2 joystick controling. Price & Conditions

Condition: not inspected (used), Epson Type: G20-A01SR / RC180 Epson SCARA robot with Epson robot control Epson SCARA G20 Long arm with high force The G20 manipulators are suitable for very high loads, such as heavy components or packaging units with a high weight (up to 20 kg). Epson G20 Max. load: 20 kg Range: 850 / 1,000 mm Z-stroke: 180 / 420 mm Epson control RC180 Condition: untested / replacement defective! Condition: used Hfodpfsvx S Rtjx Afnjc Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2019, functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Robot 1 single-wire tandem welding equipment with automatic torch change system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Hfodpfx Aowgd Hzsfnsc Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m, 1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.

Condition: excellent (used), Year of construction: 1952, Robust workshop machine with character – manufactured in the renowned German factory A. Nothelfer & Söhne Ravensburg. Year of manufacture: 1952, but still fully operational, complete, and ready to work! - Siemens-Schuckert Motor • Power: 0.8 kW • Speed: 1,400 rpm • Power supply: 3-phase 220/380V • Current: 3.5/2 A • Frequency: 50 Hz • Cos φ: 0.8 - Technical condition • Fully mechanically operational • Belt drive with three-phase motor • New supporting frame with mounting holes • Foot pedal control • Electrical inspection recommended (older visible power system) - Additional information • Original nameplates • Type designation illegible, but identified by factory serial number 134058 • Work table with slots for fixture mounting Hodpfx Ajw E I Sfofnofc • Solid, heavy construction – built for decades of use • Weight: 480 kg - Applications: stamping, punching, cutting, bending metal parts – ideal for the workshop, forge, tool production, or for an industrial machinery collection.

Condition: new, ADVANCED FILTERING SOLUTIONS: Filtra.4 made by EUROMAQUINA Filtra4 is the optimal filtration system to achieve a high degree of filtration and purification of industrial liquids. Design and implementation of complete turnkey systems IT ELIMINATES THE IMPURITIES that affect the quality of the emulsion. • Mechanical chips & swarfs • Floating solid elements • Insoluble oils (from greasing, oil carried by raw material, hydraulic oils, oils from slides, etc.) APPLICATIONS of Filtra4 Filtra4 is the optimal solution for various sectors such as: Hsdpfxjwq Ngus Afnjfc • Tube: both welded as Seamless • Machining centers: grinding, turning • Bars: turning, straightening and polishing • Steel transformation / forming plants • Forging or cold stamping IT IMPROVES THE EFFICIENCY of uour industrial processes 1. No consumables It completely eliminates the use of expensive consumables such as filtering paper or mesh. Filtra4 is an automatic filter that does not require consumables, saving both operating costs, and waste management by extracting them separately. 2.“Zero” maintenance Thanks to its internal self-cleaning system, Filtra4 remains in optimal condition without requiring maintenance intervention. With Filtra.4, you enjoy continuous operation and increased operational efficiency, without concern for maintenance tasks that cause downtime. 3. High degree of filtration Filtra4 offers highly efficient multi-stage filtration that ensures accurate separation of floating particles and non-soluble oils. 4. Full-surface rotating skimmer Our rotating skimmer allows complete separation and removal of undesired oil contaminants. 5. Automatic mixing addition Forget about adding oil manually. Our system allows to add the necessary amount of soluble, with the desired % of oil. 6. Single or integrated Filtra4 adapts to your needs. It can be integrated into an existing production line to optimize its performance, new and individualized for a specific equipment or centralized to supply multiple lines, providing the flexibility and efficiency that your industry demands. For detailed information, visit our dedicated website: No consumables: Automatic filtering without the use of consumables such as paper or filter mats “Zero” maintenance: Internal self-cleaning system High degree of filtration: Multi-layer filtration with separation of sludge, fine particles and non-soluble oils Full-surface rotating skimmer: Complete and separate removal of contaminating oils Automatic mixing addition: with the desired % of oil Individual or integrated: Can be integrated in one line or centralised for several production lines

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station Hfodpfxoxayl Do Afnjc + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: new, Year of construction: 2026, The CORMAK PS-180 rotator is a versatile auxiliary device that can be used in various production tasks. A wide range of possibilities makes it suitable wherever elements need to be manipulated. The welding, painting and mechanical industries appreciated the quality and rotational capabilities of our positioners. CORMAK rotators are an ideal solution wherever components or subassemblies need to be rotated, wound or rolled. Here are some key features and applications of the welding positioner: 1. Versatile use: This rotator can be used in many different types of assembly and welding work, making it a versatile tool in workshops and production plants. 2. Work on cylindrical elements: It is particularly useful when welding cylindrical elements, such as tanks and pipes. Thanks to the ability to rotate the disc in the range of 0-90°, it allows welding in the optimal position, which translates into the quality of welds and work efficiency. 3. Durability and strength: The solid construction of the machine makes it durable and resistant to intensive use. This, in turn, translates into the durability and reliability of the device. 4. Speed Control: The ability to adjust the speed of the rotator disc is important because different tasks may require different speeds, allowing you to tailor the unit to your specific needs. 5. Control pedal: The presence of the pedal allows the operator to precisely control the operation of the rotator. The operator can easily adjust the speed and direction of rotation of the disc, which is important during welding and assembly. 6. Mounting grooves: Mounting grooves allow the installation of handles and jaws, which increases the versatility of the device and allows for secure holding and rotation of components. 7. Simple and partially automated production processes: This device can be used in production processes, both in tasks performed manually by the operator and in partially automated processes, which speeds up work and increases precision. Hfodjrigkpepfx Afnoc To sum up, the CORMAK PS-180 rotator is a valuable tool that is used in many industrial fields, especially where there is a need to rotate and weld cylindrical elements. Thanks to its versatility, speed regulation and precise control, it provides valuable support for operators when performing various assembly and welding works. Technical parameters: Rated load 10 kg Worktable size φ180 mm Tilt angle 0°～＋90° Rotation speed 1 ~ 8 rpm Rotational power 15W Manual tilt Voltage 220V-1PH-50HZ Dimensions 260x320x280 mm Weight 10 kg *three-jaw chuck is not included in the set