Used Floating Cross Table for sale (20,301)

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t Fsdpefv Axmofx Agxjgi ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch Fgedpfxjfv Ayko Agxoi - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm Fsdpfxefv Ayys Agxsgi engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 780 mm Fodpefv Ay Ssfx Agxjgi table load 1,0 t swivelling range 0 - 135 Grad turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1000 Nm welding current 500 Ampere including remote control and welding current transmission.

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm Fgjdsfv Azhjpfx Agxoi welding current 700 Ampere including remote control and welding current transmission.

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. Fgjdpfsftd T Ssx Agxoi The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, number 37 Positionen 28 mm condition neu weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Fgodpfx Ajgazl Rsgxsi Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. Fgedpfx Aogazl Uogxei

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Fodpjgazmkefx Agxogi Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, number 57 Positionen 22 mm condition neu weight 66 kg Set 2 57 pieces, 22mm system, consisting of: Fjdpfx Agjgazmrexjgi Clamps: 6 x 220610.1 Clamps 4 x 220630.1 Prism 4 x 220645.1 Bolt: 18 x 220511 Magnetic bolt 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Stop: 2 x 220426.N Angle: 4 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) Fodpfx Ajga Nh Hegxjgi 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, table length 1300 mm Fedpofrzt Aefx Agxjgi table width 800 mm stroke height 1010 mm weight max. in kg 2000 kg 190 mm connected load frequency 400 V total power requirement 0,75 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, number 57 Positionen weight 98 kg condition neu 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Fgodefh Uw Rjpfx Agxji Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport.

Condition: new, Motor: 750W - 230V - 1 Phase Drilling capacity: 20 mm Spindle stroke: 85 mm Spindle taper: MK2 Number of speeds: 16 Spindle speed: 220-2840 rpm Work table: 305 x 305 mm Base: 460 x 280 mm Column diameter: 72 mm Overall height: 990 mm Weight: 60 kg Packaging: 820 x 500 x 290 mm INCLUDED * Digital depth stop Fjdek Iuqyopfx Agxegi * CE protective shield * Laser guide * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Ejector pin

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" Fgedpfx Aemhm Auogxji is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table diameter 350 mm table load 100 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t Fgjdpfx Agsupw Nxsxsi dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: new, table length 1825 mm table width 660 mm Fedpsupxptjfx Agxsgi stroke height 750 mm 20 mm weight max. in kg 450 kg weight of the machine ca. 130 Kg 2,2 x 0,85n x 0,24 m With the lifting table, medium-sized motorcycles, mopeds and scooters can be easily brought to a comfortable working height. The table is equipped with two hydraulic foot pedals. One for pumping up, one for lowering. Device for attaching the front wheel. Incl. access ramp.

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m Fedpfeu Nkm Ejx Agxogi T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm * Fgedpfxsu Nkrbo Agxoi

Condition: used, Year of construction: 1989, Technical details: table length: 1600 mm table width: 920 mm height over floor: 200 mm weight of the machine ca.: 0,69 t Clamping table with 4x through holes Ø 22 mm Material cast steel T-slot according to DIN 650: T-slot spacing 250mm T-slot outer spacing (right and left) 120 mm a=22; h=38.5; b=40; c=18 mm T-slot length = 1380 mm Fsdju N Ebqspfx Agxsgi *

Condition: new, Year of construction: 2024, total height: 2,100 mm, lifting height: 2,200 mm, empty load weight: 3,000 kg, load capacity: 4,500 kg, Lifting frame for timber packages 1200 x 1200 3000 - 6000 mm 5 lifting arms Max. load 4 to Dimensions width: 2500 mm length: 5000 mm height 2100 mm Stroke: from 550 - 2200 mm Fodper Ddbgsfx Agxegi Gear motor 400 V 3 KW

Condition: new, number 93 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Fodeyv I Eajpfx Agxjgi Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 102 Positionen Fjdpfxeyv I Hde Agxegi weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, table length 2000 mm Fgsdpfxeyv I Hwo Agxji table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: new, table length 1200 mm table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Fedoyv I Inopfx Agxsgi Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm