Used Flat Steel for sale (20,244)

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Hjdpoyh Na Eefx Aicsfk

Condition: used, Used Lödige model FKM 1600D stainless steel ploughshare mixer. 1600 litre total capacity and 550-1100 litre working capacity. Ploughshare mixing blades direct driven by 21-35 kW 400 volt 3/50 740-1479 rpm motor through Flender type 185 102 025-2-1 gearbox rated 31kW with 1500rpm input and 115rpm output. Unit has (2) MK 30/55 choppers with air purged seals driven by 5.5kw motors. Has (2) side inspection doors and pneumatically operated drop door discharge. Hedszn Nmyepfx Aicefk

Year of construction: 2016, condition: like new (used), Ytron Vibration Mobile Stainless Steel Feeder Hopper EX rated 11 2 D IP65, Atex Vibration motor Temperature probe Hfedozp N Exjpfx Aicsk Year 2016 As new condition Including control box

Condition: used, Used NIRO stainless steel spray dryer - N° 1405 - Tank Ø 800 x 600 mm - Cone Height 650 mm - Electric heating 9 kw - Fan 0.75 kw Hfjdpfezcwnvox Aicok

Condition: used, Used approximately 8,100 litre stainless steel vertical storage vessel. Internal approximately 1750mm diameter x approximately 3000mm straight side. Has welded dished top and bottom heads. Mounted on (4) legs. Hsdpfx Aezn Nr Njicefk Specifications: Capacity: 8,100 L

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single Hsdpfxjzfh U Dj Aicjfk

Condition: good (used), Year of construction: 2007, Gebruikte pons knipmachine van Peddinghaus Hfjdezul Adepfx Aicsk Type Peddimaster 110/170 Capaciteit ponsen 110ton Capaciteit knippen 170ton Inclusief zij aanslag en diverse gereedschappen

Condition: good (used), mileage: 686,922 km, power: 280 kW (380.69 HP), first registration: 04/2001, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,250 mm, total width: 2,550 mm, total height: 3,560 mm, Year of construction: 2001, Equipment: ABS, air conditioning, cruise control, electric window regulation, parking heater, power mirror, seat heater, = Additional Options and Accessories = - Heated mirrors - Tachograph (driver's control unit) - Fixed - Halogen lamp - Manual - Auxiliary drive - Space Cab - Fabric = Notes = Number of axles: 3, Configuration: 6x4, Tare weight: 15410 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 380 liters, Fifth wheel height: 129 cm, Fifth wheel: Fixed, Number of locks: 2, Winch pulling capacity: 725 tons, Suspension type: Leaf suspension, Cabin type: Space Cab, Cruise control, Tachograph (driver's control unit), Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Flashing lights, Engine power: 280 kW (375 Hp), Fuel: Diesel, Euro: 3, Transmission type: Manual, Transmission type: ZF, Gears: 16, Clutch pedal, Power steering, ABS, Auxiliary drive, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, FTT 6X4 FULL STEEL // BIG AXLES // MANUAL GEARBOX // EURO 3 // GERMAN TRUCK // ONLY 689TKM = Additional Information = Transmission Transmission: ZF, 16 gears, Manual transmission Axle Configuration Brakes: Drum brakes Suspension: Leaf suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 12 mm; Tire tread depth right: 13 mm Axle 2: Tire size: 295/80R22.5; Double tires; Tire tread depth left inside: 18 mm; Tire tread depth left outside: 18 mm; Tire tread depth right inside: 18 mm; Tire tread depth right outside: 18 mm Axle 3: Tire size: 295/80R22.5; Double tires; Tire tread depth left inside: 18 mm; Tire tread depth left outside: 18 mm; Tire tread depth right inside: 18 mm; Tire tread depth right outside: 18 mm Weights Tare weight: 15,410 kg Payload: 10,590 kg GVW: 26,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Hjdpfeztv Tdox Aicjfk Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and models from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Hjdpfx Aistwgirscefk Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8 Hfedpfx Askw H Ekjicsk

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Hedjdzc Rxopfx Aicofk Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Hodoymayvspfx Aicsfk

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. Hfedpjxb Uq Defx Aicjk The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: good (used), Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank Hfodpfx Aiszucb Dscsk -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available -Price: per piece -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.

Condition: excellent (used), Year of construction: 2017, Ref:11120 . 2017 JUKI LU-114-4 Flat Bed Book Sewer For through-book sewing for special applications such as Passports & Bank books. Hand fed operation Continuous single stitch Hodozkgf Sepfx Aicofk Specification: Maximum thickness: 5 mm.

Condition: used, Used Vrieco approximately 300 litre capacity stainless steel conical mixer. Mixing cone measures approximately 1,200mm top diameter x 1,500mm high. Has top mounted electric drive / gearbox for stainless steel screw and stainless steel orbit arm. Has bottom outlet with valve. Unit is mounted in stainless steel frame with (4) legs. Hfedpfxezindms Aicsk

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Dimensions: 2,150mm tan to tan x 1,600mm diameter Hjdpfx Aozim A Ieicefk

Condition: used, Used GEA Westfalia model FSD 1-06-107 stainless steel disc bowl centrifuge. Clarifier design with total capacity 1 litre and solids holding space 0.5 litre. Heavy liquid 1.0 kg/dm3 and solids 1.4 kg/dm3 solids. Maximum speed rated 10,000rpm. Centripetal pump output up to 300 l/h depending on medium. Belt driven by 1.1 kW 220/380 volt 3/50 3,000 rpm motor. Mounted on skid with HMI control panel and stainless steel collection pot. New 2018. Hfjdpfx Ajzimv Usicek

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt Hodedahcvjpfx Aicefk -Body: made of stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg

Condition: ready for operation (used), Siemens 6AV7861-3TB00-0AA0 Simatic Flat Panel 19" Touch Industrial Monitor, SN: LBW1004945, Serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hedpoi Edd Uofx Aicjfk

Condition: ready for operation (used), Siemens 6AV7861-2AB00-0AA0, 15" Flat Panel Display, Serial No.: LBU4002132, Serial number as shown in the photo. Used, significant signs of wear, 100% functional. Scope of delivery as shown in the photos. Hjdpoi Eddmjfx Aicefk

Condition: excellent (used), Year of construction: 2006, 2006 CIMC 40FT FLATRACK FLUSH FOLDING Stackable Tare weight: 5,100 kg Max payload: 39,800 kg Max gross weight: 50,000 kg CSC: 12/2027 = Further information = Year of manufacture: Dec 2006 Model year: 2006 Tare weight: 5,100 kg Payload: 39,800 kg Gross vehicle weight: 44,900 kg Technical condition: very good Optical condition: very good Please contact Arne Honingh for more information. Hfjdpozua Hdefx Aicek

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2006, loading space length: 11,550 mm, loading space width: 2,510 mm, loading space height: 2,100 mm, total length: 11,750 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 60 %, wheelbase: 8,600 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Steering Axle = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Tyre profile: 60% Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steering Weights Hfjdpszudzrjfx Aicjk Empty weight: 7.300 kg Carrying capacity: 22.700 kg GVW: 30.000 kg Identification Registration number: OJ-09-KX

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/1989, total width: 2,490 mm, suspension: steel, tire size: 385/65, tire condition: 30 %, wheelbase: 5,460 mm, color: other, Year of construction: 1989, = Additional options and accessories = - Leaf spring = More information = Hsdpfjzuaq Nsx Aicefk Axle configuration Tyre size: 385/65 Make axles: Fruehauf Tyre profile: 30% Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 2.840 kg Carrying capacity: 27.160 kg GVW: 30.000 kg Identification Registration number: OB-15-HG

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Hjdpfx Aezurz Heicsfk Weight approximately: 2500 kg