Used Flat Cutting Machine for sale (69,271)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included Dkodpozizkyofx Aa Hot CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function - Manual workpiece clamping - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting Dkodpfx Aaozza Hko Hjt - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC, laser type: CO₂ laser, laser power: 4,000 W, CNC laser cutting machine Amada LC 2415 alpha IV NT The machine is located in an operating facility and can be inspected while powered on. X working area max.: 2520 mm Y working area max.: 1530 mm Z working area max.: 300 mm Dksdpfx Ajzxtkkoa Het Control system: Siemens Fanuc AMNC Laser power: 4000 watts Standard equipment: • Controlled axes: X, Y, Z (three axes are controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with repositioning) • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatability: ±0.01 mm • Maximum workpiece weight: 330 kg • Height of the processing surface: 820 mm • Dimensions of the workpiece channel: 550 × 1,750 mm • Laser type: CO₂ laser with fast axial flow and high-frequency discharge excitation • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm

Condition: excellent (used), Year of construction: 2018, 2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine With O.M.S Sordella Pallet Loading System with Siemens Touch Simatic HMI With IPG Laser YLS-4000 4,000 Watt high Power Laser. Working Area 'X'=3,048mm, 'Y'=1,524mm. Maximum Table Load 1,050kg. Axis Travel 'X'=3,065mm, 'Y'=1,565mm, 'Z'=150mm. Maximum Feed 'X,Y'=100m/min, Trajectory 'X, Y'=140m/min. Trajectory Acceleration 17m/s2. Positioning Accuracy (Pa) & Repeatability (Ps) According To VDI/DGQ 3441 Standards* 'X, Y'=0.03mm. Working Hours 57,510. S/No. P5.03.00.01 (2018). Pallet Loading Capacity 10 Pallets, Maximum Weight On Loading System 3,300kg. Dodpfx Aezvc I Hea Hokt With Sick M4000 Safety Light Curtain, Cosmotec Chiller Unit, Chiller Unit, Internal Camera & Manual. Overall Dimensions L10,600 x W3,450 x H2,185mm. Weight 10,000kg. Note: Machine Has Full Service History Records Since Purchase 2018.

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) 4mm Aluminium (A5052) Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) Dsdpfx Aaouk U I Us Hekt 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor NC Autofocus Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision o Integrated conveyor system for efficient material handling Dkodpfxjwm Nu De Aa Hst o Modular design allowing up to three tools to operate in parallel

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 43,824 h, control type: CNC control, degree of automation: automatic, controller model: siemens 840d, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 5,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, table length: 6,000 mm, table width: 2,000 mm, feed rate X-axis: 330 m/min, feed rate Y-axis: 300 m/min, type of cooling: water, total length: 6,000 mm, total width: 2,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, - TruLaser 5060 (L19) - 6000x2000mm - Single head, 250mm - Automatic pallet changer Djdpfx Aozy U Rzea Hjkt - Longitudinal conveyor belt - 5000W - CE marking - Automatic nozzle changing system - Pallet changer cleaning brush - Cooline - Right-hand installation possible - Transverse conveyor belt - External loading and unloading interface (automation not included) Disassembly (not included)

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Djdpfxswwzudj Aa Hjkt Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: used, LDV PUMA LASER Model 3015 Fibre Cutting Machine, Year of Manufacture 2024. Model MFMC-12000 , Laser Power 12 KW. Dksdpfx Aozwgg Nea Hjt

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser power: 3,000 W, New Senfeng SF1313G 3 kW Laser Cutting Machine for Sale Precision Laser Cutter for Metal, Acrylic & Plastics – Available Immediately We offer a used Senfeng SF1313G laser cutting machine with 1.5 kW for sale. The machine is fully operational, reliable, and ideally suited for processing metal, acrylic, and plastics – perfect for companies, workshops, or start-ups looking for a CNC laser cutter. Thanks to its compact design and powerful laser, the SF1313G is ideal for precise laser cutting and a variety of industrial applications. Technical specifications & features Machine attributes Manufacturer: Senfeng Model: SF1313G Power: 3 kW Type: CNC laser cutter / laser cutting machine Materials: Metal Condition: used, inspected, fully functional Advantages of the Senfeng SF1313G - Precise laser cutting for various materials - Easy operation & reliable performance - Ideal for industry & trades - Compact design, easy to integrate into workshops Why choose this laser cutter? - Used, but fully functional: Ready for immediate use - Industrial quality: For precise metal processing - CNC control: Accurate and repeatable results - Versatile: Suitable for workshops, start-ups, small batch production - Regionally available: Located in Thuringia / fast pick-up possible --- Model Overview SF1313G MAX 3000W Laser Cutting Machine Features: - High-strength machine bed - Fully automatic focus - High-strength aluminium alloy beam - Intelligent following system G·Classic Series Technical Parameters (SF1313G) 1. Work area: 1300×1300 mm 2. X-axis travel: 1300 mm 3. Y-axis travel: 1300 mm 4. Z-axis travel: 100 mm 5. X/Y positioning accuracy: ±0.05 mm 6. X/Y repeatability: ±0.02 mm 7. Maximum speed: 80 m/min 8. Maximum acceleration: 0.8 G 9. Total weight: 1870 kg 10. Maximum load: 220 kg 11. Dimensions: 2985×2160×2000 mm 12. Phase: Three-phase 13. Voltage: 380 V 14. Frequency: 50 Hz 15. Protection class: IP54 Cutting Parameters (Stainless Steel + Carbon Steel) Stainless Steel: 1 mm – 30-45 – N2/Air 2 mm – 20-25 – N2/Air 3 mm – 8-10 – N2/Air 4 mm – 5-6 – N2/Air Dsdpfx Asyxf Rlja Hokt 6 mm – 2-3 – N2/Air 8 mm – 1-1.5 – N2/Air 10 mm – 0.5-1 – N2/Air 12 mm – 0.4-0.6 – N2/Air Carbon Steel: 1 mm – 30-40 – Air/N2 2 mm – 15-20 – Air/N2 3 mm – 3.5-4.5 – O2 6 mm – 2.5-3.5 – O2 8 mm – 1.8-2.3 – O2 10 mm – 1.4-1.8 – O2 12 mm – 1.0-1.4 – O2 14 mm – 0.8-1.0 – O2 16 mm – 0.7-1.1 – O2 20 mm – 0.5-0.7 – O2 Cutting Parameters (Brass + Aluminium) Brass: 1 mm – 25-30 – N2/Air 2 mm – 12-17 – N2/Air 3 mm – 5-6 – N2/Air 4 mm – 2-3.5 – N2/Air 5 mm – 1.8-2.5 – N2/Air 6 mm – 0.8-1.0 – N2/Air Aluminium: 1 mm – 30-35 – N2/Air 2 mm – 14-20 – N2/Air 3 mm – 8-10 – N2/Air 4 mm – 5-6.5 – N2/Air 5 mm – 2.5-3.5 – N2/Air 6 mm – 1.2-1.5 – N2/Air 8 mm – 0.7-1.3 – N2/Air Warranty – 2 years

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process. Dedpfx Aezlt Aysa Hekt

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Dkjdpfxszyv Syj Aa Hst Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Positioneringsnauwkeurigheid: ±0,03 mm Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Koelsysteem: industrieel waterkoelsysteem

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 77249, input voltage: 220 V, cutting length (max.): 2,500 mm, cutting width (max.): 1,250 mm, input current: 1 A, ESAB-HANCOCK oxy-fuel cutting machine UXB 12.5 – manufactured in 1994 – fully functional For sale is an oxy-fuel cutting machine from the manufacturer ESAB-HANCOCK GmbH, type UXB 12.5. The machine is in fully functional and operational condition. It was rarely used in our company and therefore has relatively low usage. Technical data: Dkedpszxqa Aofx Aa Het Manufacturer: ESAB-HANCOCK GmbH Type: UXB 12.5 Machine no.: 77249 Year of manufacture: 1994 Connection voltage: 220 V Frequency: 50 Hz Condition: used, fully functional Inspection & collection: The oxy-fuel cutting machine can be inspected on-site and tested for functionality after prior appointment. The sale is exclusively for self-collection. Dismantling, loading, and transport must be arranged beforehand. We will gladly provide further technical information, dimensions, or additional images if there is serious interest.

Condition: used, Year of construction: 2015, Swift Cut 3000 W/T Plasma Cutting Machine, 3000mm x 1500mm Cuttting Bed, Hypertherm Powermax 125 Power Source. S/No. 4500318 (2015). Country of Origin: United Kingdom Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Djdpszn Uuiefx Aa Hjkt Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, laser power: 8,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, fiber laser cutting machine power: 8000W table size: 4000x2000mm pallet changer Siemens controller Siemens drives Dsdpfjzx U T Tox Aa Hokt THK guides Precitec Procutter auto focus torch Max Photonics resonator CE warranty offered with: warranty CAD / CAM software setup delivery (optional) training this is an exhibition machine and could be tested under power any time. please contact us

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Dksdpfx Ajyzhl Dja Hst

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: SF3015H, laser power: 1,500 W, Equipment: documentation/manual, safety light barrier, Cutting of Steel, Aluminum, Stainless Steel Perfect for beginners Maintenance support provided by the Dutch importer. The machine is currently installed. Senfeng Fiber laser cutting machine Laser 1.5 kW – IPG (Swiss) Exchange table 1500*3000 Djdpfezwvrhsx Aa Hokt Laser wavelength 1060mm – 1080mm Positioning accuracy +/- 0.03mm/m Repeated positioning accuracy +/- 0.02mm/m X/Y/Z axis travel 1500mm/3000mm/220mm Max. positioning speed 100m/min Max. movement velocity 120m/min Control system/Nesting software Cypcut Acceleration 1.5G Working voltage 380V/50Hz Fiber laser cutting head (Auto Focus) Senfeng Brand Driver system Schneider (France) Linear guide system THK (Japan Brand) Transmission system Dual Rack & Pinion type Reducer Motovario (French Brand) Pneumatic component SMC (Japan Brand) Water chiller unit Tongfei/Teyu (China)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser source manufacturer: Max Photonics, laser power: 3,000 W, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 2 mm, sheet thickness copper (max.): 2 mm, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube & Profile Laser System – NEW 2026 | Ultimate Precision & Efficiency Secure cutting-edge laser technology for your production from the specialist in tube and profile laser systems. Brand-new ACME Tube & Profile Laser System (Year of manufacture 2026) – engineered for maximum productivity, precision, and reliability in industrial applications. Thanks to an innovative design with vertically mounted guides, you benefit from an especially compact footprint combined with high stability and performance. Your advantages at a glance: ✔ Processing of tubes & profiles up to 250 mm Ø / edge length ✔ Optional 45° laser head for complex cuts and maximum flexibility ✔ CE compliant – highest safety standards ✔ Central lubrication – reduced maintenance, extended service life ✔ Semi-automatic loading – efficient material flow ✔ In-house service team + online support – rapid assistance, minimal downtime ✔ 2 chucks This system is the ideal solution for companies seeking to boost productivity while reducing costs. Condition: New Year of manufacture: 2026 Dksdoy Iwxgspfx Aa Hjt Availability: Approx. 3 months after order Inspection or demonstration of a system is possible at any of our customers’ sites by appointment.

Condition: good (used), Year of construction: 2017, functionality: fully functional, • Baykal BPL-H 4012 • Supplied new in 2017 • Hypertherm XPR300 AutoGas Dodpfezp D S Tex Aa Hjkt • EDGE Connect CNC • Twin plasma heads • Arc hours: 2,016 and 3,120 • 4 m x 12 m bed

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual Dedpfx Aozyz D Iea Hekt – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Bystar 4025 NT 80 for sale C02 laser 4.4kW Bylaer resonator Fully operational and can be seen in production Machine includes Dust extraction and chiller Also included is an additional Bylaser 4400 (4.4kW) Perimeter light guards Dkodpfx Aajzw Em Io Hot The machine is unique in that it has two 8000mm change over tables that feed the 4025 machine, two extension work areas at each end of the machine as can be seen in the pictures allowing an 8000mm cutting area. Please feel free to contact if you require any additional information, currently in production but will be available for decommission in November due arrival of new machine.

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 Fiber Laser Cutting Machine – Manufactured in 2019 – Used Bodor P3 3D? / Fiber Laser Cutting System – Manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning, and generous working area. An interesting machine for sheet metal processing, metalworking, contract manufacturing, and industrial production. Used machine – inspection possible by appointment. Transport, disassembly, and loading can be arranged upon request. Upon request, transport and loading can be organized throughout Europe for an additional fee. Prices exclude VAT. Dsdjzylxvepfx Aa Hokt Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, controller model: SINUMERIK 840D SL, laser power: 3,200 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, The machine was exclusively serviced by Trumpf until 2023 as part of a maintenance contract. TECHNICAL DETAILS Working length: 3,000 mm Working width: 1,500 mm Working height: 115 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 115 mm Maximum workpiece weight: 900 kg Dodpozyakgsfx Aa Hjkt Sheet thickness steel max.: 20 mm Sheet thickness stainless steel max.: 12 mm Sheet thickness aluminum max.: 8 mm Sheet thickness max.: 20 mm Feed rate X-axis: 100 m/min Feed rate Y-axis: 200 m/min Feed rate Z-axis: 80 m/min Cutting speed: 140 mm/min Positioning speed X/Y-axis: 140 m/min Repeat accuracy: 0.05 mm Smallest programmable step: 0.001 mm MACHINE DETAILS Laser type: CO₂ laser Laser source manufacturer: Trumpf Laser source model: TruFlow 3200 Laser power: 3,200 W Laser wavelength: 10,600 nm Cooling type: Water Control type: CNC control Control manufacturer: Siemens Control model: SINUMERIK 840D SL Automation level: Semi-automatic Operating type: Electric Input voltage: 400 V Input current: 100 A Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,500 x 7,600 x 2,200 mm Total weight: 12,000 kg Laser hours NC control: 35,623 h Laser hours resonator / pump 1: 34,258 h Laser hours beam on / pump 2: 10,155 h EQUIPMENT CE marking Central lubrication system Cooling unit Documentation / manual Dust extraction Emergency stop switch Safety light curtain

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Dedpfszycrajx Aa Hjkt

Condition: used, Year of construction: 2021, CNC gantry flame cutting machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of manufacture: 2021 CNC control: Global Control Dkjdezyabljpfx Aa Het Track gauge: 3,600 mm Work tables: 2,300 x 6,200 mm 4 oxy-fuel torches, type ALFA MS 4452/250 Cutting thickness: max. 150 mm Bevel cutting possible Automatic gas control (OmniFlow) for cutting oxygen (max. 15 bar) Extraction system: Keller dry dust collector, type Vario 2 Software: OmniWin2021 3916