Used Flail Mower Quad for sale (439)

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Knsdpfx Aajxx Tigs Eef Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: good (used), Bezel, setting stick, lynette -Quads: for bezel, 3 pieces Kedohf Nh Sjpfx Aa Eonf -Diameter: 40 mm -Length: 170 mm -Groove: 7.7 mm -Weight: 4.2 kg

Condition: new, Spreaders for use behind a quad, atv, forklift or manually operated. Suitable for spreading salt and fertilizer on smaller locations. Various types available. Condition: New Knsdpfx Aex I Hxcsa Ejf

Condition: used, mileage: 92,783 km, power: 100 kW (135.96 HP), first registration: 05/1999, overall weight: 7,490 kg, fuel type: diesel, color: green, next inspection (TÜV): 01/2026, gearing type: mechanical, emission class: euro2, loading space volume: 2 m³, loading space width: 1,890 mm, loading space length: 1,950 mm, loading space height: 400 mm, total length: 4,390 mm, total width: 2,300 mm, total height: 3,050 mm, number of seats: 3, Equipment: all wheel drive, Mercedes Benz Unimog Winter Service Vehicle with "Schmidt" Snow Plough, Type: MF3.3, 3-way tipper body, salt spreader, single-circuit hydraulic system, double hydraulic connector at rear (CELL 1), quadruple hydraulic connector at front (CELL 1 & 2), mounting brackets at rear and in the middle, gearbox PTO with 4-bolt flange, Ringfeder trailer hitch, ABS trailer socket 24V, 7-pin / 5-pin, trailer socket 12V, 13-pin, mounting bracket on the left for revolving beacon, raised exhaust, cab roof elevated by 120mm, cab sound and heat insulation, headlight range adjustment, standard driver's suspension seat, double passenger bench seat, roof hatch, rear window, 2 x revolving beacons. The vehicle may be fitted with advertisements and/or lettering. Rear axle brake NEW!! Knsdpfx Aaexriurs Esf Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle may be fitted with advertisements and/or lettering. Our general terms and conditions of delivery and payment apply. We will gladly provide you with a financing or leasing offer for this item. Please contact us!

Condition: new, We supply wear parts for your Doppstadt AK 430, 435, 510, 535, 560, 635, 640, etc. Highest quality thanks to 'Made in Germany'! - Rear baskets - Rear flaps - Impact plates, toothed, with counter blade, smooth - Wear plates - Scraper floor bars Kedpew I Ar Rsfx Aa Eonf - Scraper floor chains - Flail tips - Flail holders - And much more.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Knjdpfxjx D U Eao Aa Ejf Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors.

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Knsdexx Rrropfx Aa Eef Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm Knodpfx Ajiit Eroa Ejf MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: used, Applicable material: Hay Mower type: rotary Knsdpfx Ajx I Hhwsa Ejf

Condition: ready for operation (used), functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 8,211 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper and Winter Service Vehicle – Single Ownership Kedpsx Ir Txsfx Aa Ejnf Comprehensive engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version equipped with new drive pedal system - 4,301 sweeping hours - 8,211 total operating hours - 60,430 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive system Including Kif snow plow, type CM 1600, 1,500 mm wide (as new/has never been used in snow) or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year of manufacture 2019 (as new/has never been used in snow) – not shown in photos Including Gmeiner salt spreader, type Husky 500V FS with support legs (as new/used twice for testing) - Rear-view camera - Debris hopper made of stainless steel - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,900 kg - Permissible gross weight: 3,500 kg - Dimensions: Length 4,510 mm / Width 1,210 mm / Height 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise attenuation package - Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) - Engine: Water-cooled 4-cylinder VW industrial diesel engine - Low emissions Euro 5 - Fuel tank: approx. 60 liters - Hydrostatic all-wheel drive - Dual-circuit high-pressure hydraulics - Circuit 1 (front): 0–50 / 0–70 l/min at 225 bar - Circuit 2 (rear): 0–20 / 25 / 30 l/min at 195 bar - Hydraulic service brake via foot pedal - Cabin with air-suspended driver’s seat - Air conditioning / heating - Water recycling system - Hydrant connection - Dosing system - Permissible gross weight: 3,500 kg - Unladen weight: 1,950 kg Additional applications possible with optional HAKO attachments such as sweeping brushes, snow plows, or lawn mowers (not included in the offer). Errors, changes, and prior sale reserved. We sell solely in accordance with our Terms and Conditions and excluding any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. continuously; Saturdays by appointment. Outside of these hours, appointments can be made by phone. We are happy to accept your current used machine/vehicle in trade-in. Priority is given to sales to commercial customers and exporters – this applies to our entire vehicle inventory. The above details are non-binding. Errors, changes, and prior sale reserved!

Condition: used, This listing is for 1 of 2 Thermo Scientific Sorvall RC12BP+ Floor Centrifuge Sorvall RC 12BP Plus Centrifuge System specifications: Centrifuge Specifications Maximum speed: 4,700 rpm Maximum RCF: 7,340 xg Maximum capacity: 12 L, 6 x 2000 mL Nalgene Bio-bottles, 12-500 mL quad blood bags Drive: High-performance induction Imbalance detector: 50 gram tolerance Accel/decel profiles: 11 Run time: 1 min. - 99 min 59 sec., continuous operation Temperature control range: -10 to +40 °C Dimensions (H x W x D): 1178 x 800 x 905 mm (46.3 x 31.5 x 35.6 in) Weight 470 kg (1,036 lbs) Control: Microprocessor Programmability: 15 programs Functions: Centri-Log traceability software, ACE, Step-mode runs, slow start/stop Safety features: Automatic lid lock, imbalance detection, armored guard ring, security key switch Knjdoxzgr Tjpfx Aa Eof

Condition: used, mileage: 194,905 km, power: 210 kW (285.52 HP), first registration: 05/2007, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: orange, Year of construction: 2007, Equipment list: * Vario Pilot * Front mounting plate size 3 * Main battery switch Kodox Hx Iyspfx Aa Eenf * 12V trailer socket * Large Ringfeder trailer coupling * Hydrostatic drive * Automatic shift * Hydraulic system circuit 2 * Front quick couplers 8+separate return * Rear quick couplers 4+separate return * High-performance hydraulics circuit 3+4 * Front PTO * Additional headlamps * Rear work lights * 2 beacon lights * 2 flashing beacons * Mower door (window defective) Other information: * Trade-in and purchase of vehicles and machinery possible. * Sale price exclusive of transport * No liability for printing and typographical errors. * Subject to error, change and prior sale. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information without guarantee. Further information Operating hours: 12,592 General condition: good Serial number: WDB4052011V213048

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Kjdoxx Sdpspfx Aa Eonf Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Extended radio remote control with foot switch “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 4,100 h, power: 26.5 kW (36.03 HP), motor manufacturer: Kubota V1505 – 4-cilinder, vloeistofgekoelde dieselmotor, gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 4 l/h, maximum speed: 25 km/h, color: red, overall weight: 1,335 kg, total height: 2,369 mm, total length: 3,329 mm, total width: 1,752 mm, === KEY SPECIFICATIONS === Year: 2014 Operating hours: 4,100 h Machine type: Out-front rotary mower Drive: Diesel Operating weight: 1,355 kg Dimensions (L x W x H): 3,329 × 1,752 × 2,369 mm Speed: 0–25.5 km/h (forward) / 0–11 km/h (reverse) Tyres: Pneumatic (Front 26×12-12 / Rear 20×10-8) Cab: Open (closed cab optional) CE certification: Yes Emission class: Stage IIIA === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Kjdpfjxb Tbujx Aa Ejnf Clean, well-maintained condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price: € 12,500 (EXW / excluding VAT). The Toro Groundsmaster 3400 is a professional front mower with hydrostatic four-wheel drive and a powerful Kubota V1505 diesel engine (26.5 kW / 35.5 hp). Its robust design, excellent cutting performance and easy operation make it ideal for municipalities, sports fields and landscape maintenance. Equipped with a 62" or 72" cutting deck, hydraulic drive and full CE certification – immediately available from stock in Sittard. === DELIVERY === Crane loading available on request for smooth dispatch. Flexible shipping options tailored to your destination and logistics preferences. All transport handled professionally by the Collé Rental & Sales logistics team.

Condition: new, color: red, An AGM garden and park land roller is designed to be used behind the smallest tractor, shovel or even quad.  The width and diameter are adjusted to achieve a good ratio between the compact model and the pressure. The possibility to fill the roller offers opportunities to easily make the roller heavier and thus exert more pressure. In order to be able to use a good roller behind every vehicle, the drawbar can be designed in different ways and heights. Knsdpfxex I Hbdo Aa Esf A land roller can be equipped with a fixed drawbar at the front, a 3-point connection or wheel set can be added if desired. Because we make your garden and park land roller to measure ourselves, spraying it in the desired colour is also a standard option, for example in the same colour as the favourite tractor Condition: New

Condition: ready for operation (used), operating hours: 8,211 h, functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper & Winter Service Vehicle – from First Owner - Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge by us upon sale - Machine equipped with new drive pedal system - 4,301 sweeping operation hours Kjdpfjx Ir Snjx Aa Eonf - 8,211 total operating hours - 60,430 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive Includes: - Kif snow plow, type CM 1600, 1,500 mm wide (like new – has never seen snow), or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (like new – has never seen snow, not shown in photos) - Gmeiner salt spreader type Husky 500V FS with support stands (as new – used twice for testing) - Rear-view camera - Stainless steel debris hopper - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,900 kg - Permissible gross weight: 3,500 kg - Dimensions (LxWxH): 4,510 mm / 1,210 mm / 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise reduction package - Selectable working speeds: 1,600–2,400 rpm (Eco/Standard/Max) - Engine: water-cooled 4-cylinder VW industrial diesel - Low emissions Euro 5 - Fuel tank approx. 60 L - Hydrostatic all-wheel drive - 2-circuit high-pressure hydraulics: Circuit 1 (front): 0–50/0–70 l/min, 225 bar Circuit 2 (rear): 0–20/25/30 l/min, 195 bar - Hydraulic service brake via foot pedal - Cabin with air-suspended driver seat - Air conditioning/heating - Water treatment system - Hydrant connection - Dosing system - Permissible gross weight: 3,500 kg - Unladen weight: 1,950 kg - Other applications possible using additional HAKO attachments such as sweeping brooms, snow ploughs, and mowers (not included in the offer) Errors, changes, and prior sale excepted. We sell exclusively on the basis of our terms and conditions (AGB) and exclude any form of warranty. Errors, changes, and prior sale excepted. We are available Monday–Friday from 9:00 am to 5:00 pm non-stop, Saturday by appointment. Outside these opening hours, appointments can be made by telephone. We are happy to accept your current used machine/vehicle as a trade-in. We prefer to sell to business customers and exporters—this policy applies to our entire vehicle stock. All above information is non-binding; errors, changes, and prior sale excepted!

Condition: good (used), Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock Travel: 175 mm Tailstock Spindle Taper: Knjdpfx Asx Elw Eja Eof Morse Taper: MT4 Quad Stroke: 140 mm Quad Diameter: 95 mm Driving Force: 17 kN Power Supply: 50 Hz, 3x: 380 V Total Power Requirement: 65 kVA Spindle Speeds: Infinitely Variable from 0 rpm to 4000 rpm Spindle Bore: 77 mm Tool Shank Cross-Section: 25x25 mm Swing Diameter over Bed: 420 mm Maximum Swing Diameter: 250 mm Turntable Slide: Longitudinal Travel (Z-Axis): 1150 mm Cross Travel (X-Axis): 230 mm You can find more items – new and used – in our Shop! International shipping costs on request!

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference for customer inquiries: 3-198/AVAILABLE IMMEDIATELY ----MAN TGS 26.480 6x4 Three-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: * FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 mt) * Hydraulic quadruple extension reach: 12.7 m * E-dynamic hose equipment for 2 auxiliary devices * Slewing range: 400° * Dual linkage system with PROLINK (articulating jib can be overextended up to 15°) * Electronic overload shut-off device with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Special outrigger, support width: 6.64 m, hydraulically extendable incl. FSC * Outriggers operable by remote control * FL-System (Full Lift) switchable fast operation valve for extensions * LED work lights Kedpfoxnnzcex Aa Esnf Vehicle: * MAN diesel engine D2676 LFAI, 352 kW (480 hp) output, 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 OD automatic transmission * MAN TipMatic driving programs: Performance, Efficiency, and Offroad, up to 70,000 kg * Drive configuration: 6x4 * Suspension: leaf/air * Differential locks on driven rear axles * Main wheelbase: 3,600 mm, wheelbase between rear axles: 1,400 mm * Fuel tank capacity: 310 l, AdBlue tank capacity: 60 l * Full brake assistant * High-performance engine brake MAN EVBec, multi-stage * Disc brakes on front axle, drum brakes on rear axles * Trailer coupling RINGFEDER type 4040/G150A * Cab type NN: practical (narrow, medium length, standard height) * Mechanical tilting roof * Air-suspended driver's comfort seat, with lumbar support, shoulder adjustment, and seat heating * MAN EasyControl operating panel, 4 functions, operable from outside with door open * Electric sunblind on windshield (interior) * Refrigerator box * MAN SmartSelect infotainment control with touchpad and direct access buttons * MAN Media System Navigation Advanced 7 inch * MAN Sound System Advanced * Navigation map for Europe and Russia * Online traffic information for navigation * Standard driveline extended warranty for the 3rd year of operation up to 450,000 km (see service record for details) Superstructure: Three-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane, mounted directly behind the cab (crane with top equipment: radio remote control, hydraulic stabilizers operable via radio, work spotlights, etc.) Platform body: * Dimensions (L x W x H): 4,800 mm x 2,420 mm x 800 mm * (Alternatively available: Loading length 5,200 mm x 2,420 mm x 800 mm) * Front wall height: 1,000 mm Subframe: The subframe is a robust welded steel construction, two longitudinal beams with cross members to support the 5 mm thick tipper profile and the 4 mm floor plate made from Hardox or Naxtra. A 1,000 mm high fixed steel front wall with 2 round lashing eyes in the inner area, each positioned externally at half height. Corner stanchions are fixed with bottom-located locks. Rear and side walls (single pieces over full length) are made from aluminum hollow profiles, side walls are fold-down and swinging with sideboard assist. Tailgate also fold-down and swinging, with central locking integrated into the tipper profile. Floor plate made from Hardox or Naxtra with a thickness of 4 mm, cleanly welded to the tipper profile and the longitudinal and cross members. Press traverse and tipping arms are embedded and reinforced within the longitudinal beams. Lashing eyes (4 per side) are spaced along the outer edge of the tipper floor. Steel structure is made fr

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Ksdoxx R Akepfx Aa Eenf Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: used, Year of construction: 2021, turning diameter over cross slide: 440 mm, turning diameter: 680 mm, center height: 340 mm, turning length: 3,000 mm, total length: 4,700 mm, total height: 1,450 mm, spindle speed (min.): 1,000 rpm, metric thread diameter (min.): 14 mm, bed width: 458 mm, rotational speed (max.): 1,000 rpm, rotational speed (min.): 12 rpm, type of input current: three-phase, swing diameter over bed slide: 680 mm, overall weight: 4,500 kg, quill mount: MK 6, spindle mount: MK 6, center height over top slide: 220 mm, EQUIPMENT of the used machine Machine No. WAG-C1-188 year of construction 2021 STANDARD EQUIPMENT : - Complete electrical equipment 400 V. / 50 Hz. - Chuck protection electrically fused - Quadruple tool holder or optional Quick change tool holder (Multifix system) - Rapid traverse in X and Z axis - Fixed steady rest - Moving steady rest - Complete coolant system - Spindle brake - Rear chip guard - Machine light - Operating tool and instruction manual - CE standard Additional equipment of the used machine - Three-axis digital display Article 601233 - 3-jaw chuck diameter 400 mm - Faceplate diameter 500 mm - Fixed steady rest 70 - 250 mm - Fixed steady rest 150 - 380 mm Quill ends adapted for sliding inserts Article 601223 - Quick change tool holder head Multifix size C Article 605934 TECHNICAL DATA center height 340 mm Swing over bed 680 mm Swing diameter over cross slide 440 mm center width 3000 mm spindle bore 105 mm (option 155 mm) Kedow Rpd Eepfx Aa Eonf spindle nose ASA A1-11 (D-11) Number of spindle revolutions 12 spindle speed 12 - 1000 rpm. (opt. 10 -800 rpm for KK 15) Longitudinal feeds 0.05 - 0.7 mm/rev. transverse feeds 0.025 - 0.035 mm/rev. Bed width 458 mm cross travel 390 mm Top slide travel 255 mm Thread pitches: metric 0.8 - 14 mm Withworth Gg/1" 2 - 28 Module, mod. 0.5 - 7 Diametral Pitch, DP 4 - 56 Lead screw dia. 105 mm Number of stages 28 Tailstock quill MK6 Drive power 11,25 kW (opt. 15 kW) Transport dimensions 4700 x 1240 x 1450 mm weight 4500 kg Transport costs on request. You have the possibility to visit the offered machine in our demonstration center Renchen, by appointment.

Condition: used, New: Yes Applicable material: Hay Kjdpfxox I E Rde Aa Esnf Mower type: rotary

Condition: ready for operation (used), functionality: fully functional, mileage: 51,892 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 7,808 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Suction Sweeper and Winter Service Vehicle – One Owner Major engine inspection with timing belt, water pump, oil, oil filter, and fuel filter was performed at 51,892 km in 10/2025 Machine version with new drive pedal system 3,952 sweeping operation hours 7,808 total operating hours 51,892 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive Includes Kif snow blade, type CM 1600, 1,500 mm wide (like new/never used in snow) or, optionally, with Kif front broom, type CM 1600, 1,300 mm wide, year of manufacture 2019 (like new/never used in snow), not shown in the pictures Includes Gmeiner salt spreader, type Husky 500V FS, with support legs (as new/used twice for testing) Reversing camera Kjdpfxsx Ir Ivj Aa Ejnf Sweeping debris container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,950 kg Permissible gross weight: 3,500 kg Dimensions: Length – 4,510 mm / Width – 1,210 mm / Height – 1,970 mm Driving speed: 0-40 km/h Working speed: 0-24 km/h Noise insulation package Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions Euro 5 Fuel tank capacity: approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible gross weight: 3,500 kg Unladen weight: 1,950 kg The spreader is powered and operated by the machine's hydraulic system. Other application possibilities through additional HAKO attachments (e.g., sweepers, snow plows, and mowers) possible (not included) Subject to errors, alterations, and prior sale. We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, alterations, and prior sale are reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. without interruption, Saturday by appointment; outside these hours, appointments can be arranged by phone. We will gladly accept your current used machine/vehicle as a trade-in. Sales to commercial customers and exporters are given priority; this applies to our entire vehicle inventory. The above information is non-binding. Subject to errors, alterations, and prior sale!

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Kodpfx Aaoxx Rvko Eenf Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: new, Year of construction: 2024, Large stock of mower buckets • Working width from 1000 to 6000 mm Knjdpfx Aox I Dy Doa Eof • Any desired attachment • Fully customizable configuration • Fast delivery! Condition: New Year of manufacture: 2024

Condition: ready for operation (used), operating hours: 7,808 h, functionality: fully functional, mileage: 51,892 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper and Winter Service Vehicle from First Owner - Major engine service including timing belt, water pump, oil, oil filter, and fuel filter performed at 51,892 km in 10/2025 - Machine configuration with new drive pedal system - 3,952 sweeping operating hours - 7,808 total operating hours - 51,892 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Includes Kif snow plow type CM 1600, 1500 mm wide (as new/has never seen snow) or optionally with Kif front broom type CM 1600, 1,300 mm wide, year of manufacture 2019 (as new/has never seen snow), not shown in pictures - Including Gmeiner salt spreader type Husky 500V FS with parking supports (as new/used only twice for testing) - Reversing camera - Sweeping debris container in stainless steel - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,950 kg - Permissible total weight: 3,500 kg - Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low-emissions Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive system - Two-circuit high-pressure hydraulics: Circuit 1 (front): 0–50/0–70 l/min at 225 bar Circuit 2 (rear): 0–20/25/30 l/min at 195 bar - Hydraulic service brake via foot pedal - Cabin with air-suspended driver’s seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible total weight: 3,500 kg - Unladen weight: 1,950 kg - The spreader is powered and operated via the machine’s hydraulic system. Other possible applications for the HAKO machine via additional attachments such as sweeping brooms, snow plows, and lawn mowers (not included in scope of delivery). Subject to errors, changes, and prior sale. We sell exclusively under our terms and conditions and exclude any warranty. Subject to errors, changes, and prior sale. We are available Monday to Friday from 9:00 am to 5:00 pm, Saturday by appointment. Outside these business hours, appointments by phone are possible. Ksdpfx Aaox Ir Iio Eonf We gladly accept your current used equipment/vehicle in part exchange. Preference is given to sales to business customers and exporters, this applies to our entire vehicle inventory. The above information is non-binding; errors, changes, and prior sale excepted.