Used Finishing Line Flooring for sale (19,081)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Bcedsu Tg I Djpfx Af Esu Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Acemal waffle production line. Comprising divider, proofer, hot plate oven and cooling spiral. Bought new in 2015 and hardly used. From 2,000 Liège waffles per hour. Bodpfjxnqtzsx Af Eecu

Condition: used, functionality: fully functional, Scheer DB 22 double-sided line boring machine, 2 drilling motors of 1.8 kW each, 32 mm pitch, 21 spindles per beam, good condition, dimensions 3100 x 1100 x 1800 mm, portal passage 850 mm, weight 345 kg Bodpjw Adrcefx Af Eocu

Condition: used, Year of construction: 1985, Scheer DB5 row drilling machine Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm spacing Bodpfx Afswv Uy Ds Eecu - stop ruler - various dowel drills - portal opening 1056 mm - 2.2 kW

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Bjdpfx Afjvryhye Ejcu Battenfeld V125

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Bcjdpfx Aepg Er Nof Eou

Year of construction: 2021, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, CODI DPL - 250 DEPALLETISER LOWERATOR Bcsdpextavvofx Af Esu 6 HEAD COUNTER PRESSURE FILLER AND SEAMER NITRO DOSER SET FOR 250 ML CANS, CHANGE PARTS now decommisioned, ready for shipping

Condition: good (used), Flott p40 with Dofra feed on x, y, z axes. Automatically controlled. Stroke x: 6500 mm Bedpjygrybjfx Af Eecu Stroke y: 355 mm Stroke z: stroke of the drilling spindle on the drill machine, adjustable from 0 to 160 mm Morse taper MK4 Drilling up to 40 mm Tapping up to M30 Programmable via touchscreen The drilling process runs fully automatically after setup.

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. Bcsdou Rda Iopfx Af Eju The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: used, axle configuration: 3 axles, first registration: 04/2019, total length: 14,020 mm, total width: 2,550 mm, suspension: other, tire size: 385/65R22.5, wheelbase: 9,100 mm, color: grey, Year of construction: 2019, Axle configuration Tire size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 60%; Suspension: Air suspension Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: Hydraulic suspension Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 60%; Suspension: Air suspension Weights Unladen weight: 7,300 kg Payload: 34,700 kg Gross vehicle weight: 42,000 kg Maintenance, History and Condition APK (Technical inspection): valid until 02/2027 Damages: none Identification Registration number: OX-46-BJ Further Information Please contact Mark van der Steen for more information. Bcedjygw Tgjpfx Af Eeu

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65R22.5, color: silver, Year of construction: 2026, Available: March 2026 Color: RAL 9006 Complete with: - Aluminum chassis - Small door in front wall - Remote control - 2x stainless steel boxes Bedpfxoxf H T Eo Af Ejcu - Small door in front wall - Rotatable cross beam - Smartboard - Wabco OptiTire tire pressure control More information: Mark van der Steen = Further information = General Information Year of manufacture: 2026 Axle Configuration Tire size: 385/65R22.5 Axle brand: SAF CD Brakes: disc brakes Suspension: air suspension Rear axle 1: lifting axle; max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 3: max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 7,781 kg Payload: 34,219 kg Gross vehicle weight: 42,000 kg Further information Please contact Mark van der Steen for more information.

Condition: used, axle configuration: 3 axles, first registration: 02/2021, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,060 mm, color: grey, Year of construction: 2021, For more information: Mark van der Steen = Further Information = Axle Configuration Tire size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 60% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 3: Alloy rims; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 60% Weights Unladen weight: 7,550 kg Payload: 34,450 kg Gross vehicle weight: 42,000 kg Bsdpfx Afsygl Ife Escu Maintenance Periodic Technical Inspection (APK): valid until 05/2026 Identification Registration number: OS-92-NR Further information Please contact Mark van der Steen for more details.

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile Bcsdpowdgiyefx Af Esu adjustable speed belt width 900 mm with extra outfeed belt with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Bcsdpfx Asw N Nixjf Eeu Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Rondo starline is a high-performance bakery make-up line. Approx 13m long. The line consists of a calibrator. strip cutters. spray unit. Horizontal guillotine unit. Can be used for processing various dough types, including puff pastry, Danish pastry, yeast dough, shortcrust, and thin doughs for products like pizza or donuts Bodpfx Aex Squcjf Eocu

Condition: used, Year of construction: 2002, Overview  The filling line for cups was built by SIG HAMBA in 2002, is still in operation until the end of 2024, and can be inspected at any time.   Technical data   Output: 7,200 - 19,200 containers/h  Cup formats:  Cup diameter: 95 mm   Max. Height 140 mm   Filling ranges:   Filler 20 ccm to 200 ccm filling  Filler 200 ccm to 500 ccm filling  Reserve space  Closure: sealing and snap-on lid   Siemens S7 control system   Scope of delivery Filling machine | SIG HAMBA | BK 8008 P | 2002   Tray erector | Schäfer and Flottmann | SFS 337 | 2002  Empty crate conveyor | Manex | - | 2002  Packer | AF | - | 2002  Integrated in SIG HAMBA BK 8008 P system  Good maintenance condition  Full crate conveyor | Manex, Sema | Manex Elevator | 2002  Palletizer | Manex | - | 2002     Bjdpfxjt Uw E Ro Af Eecu

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Labelling machine | Krones Contiroll | 2004 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009 Bcjdpfx Afoyb Tuio Eou

Condition: used, Year of construction: 2017, Overview This PET filling line was manufactured between 1998 - 2017 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 10.500 - 18.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 10.500 - 18.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Kosme | 2017 Elevator preform | Kosme | 2017 Rinsing/Filling/Capping | Tekal | 50/70/12 | 1998 Inspection machine | Heuft | 2010 Date coder | Printer Laser | 2017 Labelling machine | Sidel | 2017 Packing machine | SMI | 2002 Palletizer | SIPA | 2011 Pallet stretcher | SIPA | 2011 Mixing- and carbonating unit | Adue | 2013 Beverage analyzer | Maselli UR21 | 2009 Conveyors for empty PET bottles | Silga | 2017 Conveyors for filled PET bottles | Silga | 1998                                                                                             Conveyors for trays | Silga | 1998 Bcjdpsx Rrdcofx Af Eeu

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer Bsdeyb R Uaspfx Af Eocu

Condition: used, Year of construction: 2000, Overview This complete filling line for non-returnable PET bottles was manufactured 2000 mainly by the german manufacturer KRONES. The line was running as a returnable bottle filling line before and was changed to non-returnable in 2007. The line is designed for high-capacity beverage production, handling up to 36,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.    Technical Data Capacity: 36,000 bph (at 0,33L) Bottle Formats: 0,33L and 0,5L Packaging formats: shrink wrapping with carry handle  Application: CSD Hygienic design condition: installed, good technical condition   Scope of Delivery Preformfeeding | SIG Coroplast/KHS | 2007 Blow Molding Machine | SIG Coroplast/KHS | Blomax 20 | 2007 Compressor | LMF | 2007 Rinsing | Krones| Variojet | 100 Stellen |  2000 Filling/Capping | Krones| Sensometic VP-IM | Capacity: 36.000/h | 2000 Cap Detection | Heuft | 2000 Drying machine | Krones| 2013 Labelling machine | Krones| Solomatic 1200-25-6-5-160 | 2013 Shrink Packer (2x) | Kettner | TFS 60 | 2000 Tray Packer | Kettner | 2000 Tray coding (2x) | Bluhm Linx 8900 | 2019 Handle Application | PAD/Kettner | 2000 Palett wrapper (2x) | Kettner/Krones | 2000 Palett labelling | Logopak | 2000 Loader | Kettner/Krones | 2000 Mixer | Krones/Anton Paar | 2000 KZE | GEA Tuchenhagen | 2000 Bcjdpeyb R U Hefx Af Eeu

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications Output: 7,800 bph Producs: Beer and CSD Formats: NRW 0.5 l 0.33 l ring neck 0.25 l LN Machine List  Machine type: Decrater Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (Screw Cap) Manufacturer: Rink Decapping in the crate Euro 0,5l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. Pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 Valves Year of manufacture: 2012 With Combi Capper 4 heads(Crown Cork and Screw Cap) Capacity: 7,800 bph Machine type: Labeling machine Manufacturer: Krones Model: Robusta Refurbished in 2012 10 Bottle plates 2 Label stations with 4 grippers and 4 glue pallets Inkjet printer Machine type: Crater Manufacturer: BMS Year of manufacture: 2012 Crate format: Modul Crate 4x5 Bcodpfeyb Sbuox Af Esu

Condition: used, Year of construction: 2008, Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, k, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling machine: P.E Srl 8T.540.1S.1E Shrink tunnel: k Tunnel 70S Shrink wrapper: k Nice Wrap35 SFUSO Handle applicator: Comag H 40/1 Palletizer: TMG Inkjet printer: Domino A200 Bcodpfowz H Ahjx Af Eju

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Bodpowh U Avsfx Af Eecu

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Filling valve diameter: Ø12mm Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery directives CE compliant Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation Force shunt free current transfer at the load cell Front protection to reduce interference on the weighing result Stainless steel control cabinet Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution Flexible operability due to tiltable stainless steel operator terminal Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III Tandem design Max. Label height: 120mm  Photocell for label scanning 2 x automatic winding station incl. counter pressure plate Mounting device with height adjustment for lateral label dispensers With adjustable side guides - passage width up to 150mm Bcsdpfomfqm Djx Af Eju

Condition: used, Year of construction: 2003, Overview This 5 Gallon Water Bottling filler was built in 2003 with proven technology by American manufacturer Steelhead. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 600 bph Bedpfx Afjtw Ip Ts Escu