Used Filtration Plant for sale (3,906)

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Tsdpfxjf Nkv So Aa Ioc Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Todpfep T Tghex Aa Isc Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted Todpjzlpv Asfx Aa Iec • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm 2) Total installed electrical power: 53 kW 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). Todpfx Ajzy R Rksa Isc If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2000, functionality: fully functional, feed rate X-axis: 40 m/min, works good! Tsdpfx Aasymtiko Ijc

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Tjdpfezvddcjx Aa Ijc

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. Tjdpfx Aaszmyvio Ioc • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: good (used), Manufacturer: Knoll Year of construction: 2008 Type: HL 250/1400 Equipment number: 368355 High-pressure pumps: 2 x………….. bar Tank capacity: 1,000 l Equipment: Knoll belt filter Note: The system was used on an index rotary machine. In this process, the coolant was pumped from the machine into the tank using a lift pump and then cleaned and pumped back to the machine using high-pressure pumps. The system has its own Siemens PLC with operator panel. Connection: 13.47 kW Weight: Tedozqy Hvspfx Aa Ioc Dimensions: 1,500 x 1,800 x 2,400 mm

Condition: used, Year of construction: 2010, “Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves Tsdpfxjztwu Ao Aa Isc Additional title: Cleaning system for cleaning pressurised tank cellars Volume circulation tank: 400 l Length: 2,5 m Width: 3,0 m Height: 2,9 m Operation / Control: Simatic S7 Material: contact surfaces from stainless steel Position: on stainless steel frame with feet Features: Circulation tank; 2 centrifugal pumps; shell-and-tube heat exchanger; 4-channel chemical dosing system; control cabinet with touch panel; flow measurement; conductivity measurement; temperature measurement; various pipes and valves

Condition: used, functionality: fully functional, Year of construction: 2003, RC rotary dryer, Ammann - Burner: Oertli / 9.74 kW Year of manufacture: 2003 Complete steel construction Tjdpfozxbihsx Aa Ijc

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Todpeyyzv Tofx Aa Ijc

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; Tsdpfxozq Axzj Aa Isc • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Tjdpfezuyuujx Aa Ijc Conveyor belt Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Hopper Loading height: 3,307 mm Roller Number of rollers: 1 Roller length: 3,000 mm Maximum roller speed: 32 rpm Permissible total weight: 33,000 kg MACHINE DETAILS Dimensions & Weight Working dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Drive Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V Rated power: 390 kW / 530 hp Fuel tank capacity: 950 l Operating hours: 5,000 h EQUIPMENT Overband magnet

Condition: good (used), Year of construction: 2006, Complete Ermont asphalt mixing plant AE feeders: 2005 Ermont drum: 2006 Todpfxoxuwure Aa Ijc ERMIS control station: 2011 Capacity: 170 tonnes/hour

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical specifications: Tsdpjxzuc Hefx Aa Ioc Operating voltage: 400V AC, 3PH/PE Frequency: 50Hz Connected load: 110kVA Main supply fuse: 200A Production capacity: depending on material to be processed, 20m/min / 6" core up to max. 830mm diameter / up to 1.4t Degree of automation: fully automatic Installation dimensions: 5.2x3.7x3.2m (LxWxH)

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Tedpfxoz Atins Aa Ioc

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Todpfx Aaey N Duqe Isc Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, TEDAK 3 Dust Filtration Unit Specifications: Manufacturer: TEDAK AB Country of origin: Sweden Model: TEDAK 3 Article No.: 111200 Serial No.: 13246 Operating pressure: 30 kPa Electrical control cabinet included Filter housing included Tsdpfxjzmd Tro Aa Ioc Suitable for filtration of wood dust, chips and other dry materials in the woodworking industry

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Todpfozg Dx Usx Aa Isc Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, functionality: unexamined, Year of construction: 1979, Various used housing parts for SBM-Vöest 10/6/4 Export Todoxv U S Rjpfx Aa Iec

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. Tedpfx Aajywua Tj Isc If you have any questions or require further information, please feel free to send us a message or give us a call. The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete: Todezhvagjpfx Aa Isc  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Year of construction: 1993, condition: ready for operation (used), Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible. Tedpfeq Ttz Tjx Aa Ioc

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Tjdpfx Aaonxk Ixe Isc

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Tedpfx Aasy Aad Ie Ioc