Used Film Processor for sale (1,745)

Condition: new, Fully automatic sawing and punching or drilling in a single machine! Djdpox Haftjfx Afnecc Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Compatible with Ø 500 or 550 mm saw blades, reversible mechanism for cut lengths up to a maximum of 4000 mm. Saw-Punching Automation System Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching based on the Profilma 502 model • Fully automatic operation and Saw-Drilling Automation System Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously • Fully automatic operation

Condition: used, machine/vehicle number: 007243, Max. machinable height: 120 mm Maximum machinable width: 230 mm Max. forward feed speed: 12 m/min Djdpeybavtsfx Afnocc Operator shafts number: 4

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Dcedpfx Aoxn Iq Defnec Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Minimum processable height: 6 mm Maximum processing height: 120 mm Minimum processing length: 370 mm Maximum processing length: 8,483 mm Minimum processing width: 25 mm Maximum processing width: 230 mm Maximum feed speed: 12 m/min Drive rollers Number of rubber rollers: 1 Number of gear rollers: 4 Total number of rollers: 5 UNITS Dodpfx Afoxw U Syjnocc Unit 1 Saw spindle: bottom Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 2 Saw spindle: right Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Unit 3 Saw spindle: left Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 4 Saw spindle: top Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control type: Siemens Simatic Panel Touch Installed total power: 24 kW EQUIPMENT CE marking

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Dodpfoxl Dz Tjx Afnecc Pneumatic material clamps Spray device Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm Dcedpfx Aovcmirofnec cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 4110BC19, control type: CNC control, MACHINE DETAILS Performance Data Connection: 380 V Frequency: 50 Hz Rated power: 35 kVA Fusing: 63 A Dcsdpsxxklxsfx Afnsc EQUIPMENT CNC control

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed Dsdpfx Asw D T Uijfnjcc - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,842 h, A film banding machine with shrink wrapper Meurer packaging machines is available. Banding capacity: 35 products/min, bundle capacity range: 1x5/1x10, product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm, bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm. Machine dimensions X/Y: approx. 3300mm/3020mm, operating hours: approx. 5842h. Documentation available. On-site inspection is possible. Dodovmq Tpopfx Afnscc

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 Dcodpfxowgmv Se Afnsc horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Condition: used, This listing is for a Milestone RHS-1 Microwave Vacuum Histoprocessor. The RHS Tissue Processing Systems will reduce processing time to 1/3rd of the time required by a conventional tissue processor. The quality of the tissues is outstanding and consistent. You can now process all tissue types simultaneously, with one program. The system is virtually maintenance free and is ready to go whenever you are. Imagine the tremendous benefit of reduced turnaround time for your lab, and for a patient. Not only will you be able to produce same day results, the RHS System needs just one environmentally friendly reagent and paraffin to get the job done. No more xylene, no stockpiles of reagents to accommodate in your lab. Dodpfoxzhxbox Afnocc

Condition: used, Microprocessor controller, temperature controller, injection molding machine -Number: 11 control loops -Control connections -Weight: 20 kg Dcjdpfsb Uhr Sjx Afnec

Condition: used, functionality: unexamined, Ferwood code: RU0010116 - Manufacturer code: 2-083-02-8407 - Condition: Used - Functionality: Not tested - If interested, we offer a refurbishment service. Please contact us. Dodowtgcropfx Afnocc

Condition: used, Year of construction: 2002, Lastra SM 65 Film Processor Year of 2002 Dcodpfev N Dybox Afnec Item No. L986

Year of construction: 2018, condition: excellent (used), functionality: fully functional, The Cryovac VS26 is a semi-automatic vacuum skin packaging machine designed for small to medium-scale operations. It utilizes Cryovac’s Darfresh® films to create high-quality, vacuum-sealed packages that extend product shelf life and enhance presentation. Key features of the VS26 include: Packaging Speed: Capable of producing up to 15 packs per minute, depending on operator loading speed and product configuration. Versatility: Accommodates a range of product sizes with maximum dimensions of 670 mm (length) x 470 mm (width) x 50/90 mm (height for standard/high chamber versions). Quick-change features allow for easy adaptation to different product formats. Film Compatibility: Designed to work with Cryovac’s Darfresh® films, known for their high formability, sealability, barrier properties, and clarity. The system ensures easy film positioning and unwinding. Djdpjvpq R Hjfx Afnjcc Product Quality: Produces packages with long shelf life, no vacuum loss, excellent skin effect, reduced drip loss, and optimal product visibility. The trays are made of printable, chlorine-free, and stiff film to meet various customer needs. User-Friendly Design: Features ambidextrous conversion and a robust build that provides easy access for cleaning and maintenance. The machine is designed with ergonomics, safety, and hygiene in mind, meeting relevant European legislation. Safety Features: Equipped with a two-start button control and interlocked guarding, providing a category 1, state-of-the-art safety system. The VS26 is suitable for packaging various products, including fresh meat, poultry, seafood, processed meats, cheese, and ready meals. Its semi-automatic operation and flexibility make it an ideal choice for processors looking to produce high-quality vacuum skin packages without the need for high-volume automatic equipment. Year of manufacture: 2018 One pallet of foil and new knife set included.

Year of construction: 2024, operating hours: 10 h, condition: like new (used), Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials. Dsdpfx Afjtziudonjcc

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering Djdpfjtndpzsx Afnecc - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. - Filler / capper model Weighblock 16/1440 6/540 P. Dcodpjyhc Sdsfx Afnsc - Labeller model Extra HM 4/720 Sa1 E1. - Packer model Acepack 2/4T. - Carton erector model Formapack H. - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. - Coders, handle applicators, elevators and conveyors. - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning High-speed positive automatic product feeding systems Available with or without a sealing station Arrangeble for in-line connection Quick, repeatable, and tool-free format change Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Dedpfx Asybcwtofnocc Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total length: 1,120 mm, total height: 1,490 mm, total width: 660 mm, type of input current: AC, product height (max.): 120 mm, product height (min.): 1 mm, product length (min.): 50 mm, product length (max.): 430 mm, product width (max.): 290 mm, product width (min.): 50 mm, input voltage: 230 V, input current: 13 A, overall weight: 100 kg, power: 3 kW (4.08 HP), film width: 400 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), table width: 320 mm, table length: 460 mm, Equipment: documentation/manual, 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine – UNUSED – As New Used 2017 Robert Seal Corp SC346 heat shrink wrapping machine for sale. Never used from new, single phase, compact shrink wrapper, excellent condition. Machine Manufacturer: Robert Seal Corp. Model: SC346 Machine Type: Heat Shrink Wrapping Machine Year: 2017 Condition: Never used from new. High-Quality Heat Shrink Packaging Machine for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine, supplied new and never used from new. The machine is in very good / as-new condition, making it an excellent opportunity to acquire a modern shrink wrapping system at a fraction of new cost. Designed for efficient, professional heat-shrink packaging, this compact and reliable machine is ideal for manufacturing, food, print, distribution, e-commerce, and general packaging applications. Key Features & Benefits Robert Seal Corp SC346 Heat Shrink Wrapper Manufactured 2017 Never used – unused stock Compact footprint Simple, reliable operation Single-phase power – easy installation Ideal for small to medium production runs CE marked Technical Specifications – Robert Seal Corp SC346 General Machine type: Heat Shrink Wrapping Machine Model: SC346 Year of manufacture: 2017 Condition: Very good – never used Supplier: Robert Seal Corp CE compliant Power & Electrical Power supply: 230V – 1 Phase Frequency: 50 Hz Installed power: 3.0 kW Current: 13.6 A Dimensions & Weight Overall machine dimensions: Length: 1120 mm Width: 660 mm Height: 550 mm Machine weight (without stand): 69 kg Working table height (on stand): 940 mm Sealing & Packaging Capacity Sealing area: 320 × 460 mm Minimum package size (A × B × C): 50 × 50 × 1 mm Maximum package size (A × B × C): 430 × 290 × 120 mm Note: B + C must not exceed 350 mm Film type: Centre-fold shrink film Maximum film thickness: 60 gauge Typical film dimensions (D-F-E): 400 × 250 × 75 mm Operating Characteristics Acoustic noise level: 71.8 dB Dcodpfxjydqm Ie Afnec Compact, energy-efficient heat tunnel Suitable for continuous or intermittent operation Ideal Applications Product shrink wrapping Food & beverage packaging Printed materials & cartons E-commerce fulfilment Contract packing operations General manufacturing & distribution Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used & unused machinery Machines honestly described and inspected Nationwide & export delivery available Competitive pricing

Year of construction: 2018, condition: excellent (used), Complete powder packing system for manufacturing and filling bags up to 10kg. The plant was purchased in 2017/2018 and has only been used very lightly (approx. 60 tonnes in 2024). The system comprises of the following equipment: 1 x Entecon AMC blower conveyor with control box. 1 x Busch vacuum lifting system. Model - SB 0310 D 0H0 UH XX. 1 x Fluidiser with high and low level probes. 1 x All-Fill powder auger filler with agitator and outfeed tube. Model - S10. 1 x Gainsborough Engineering Co. GV4 vertical form, fill and seal bagging machine (2018) fitted with Markem Imaje Smart-Date X60 thermal printer. Sealing bars - 430mm (horizontal) and 600mm (vertical). Current film - 840mm wide. Used to produce 400mm wide bags. Dedpfxjwa Ilhs Afnocc 1 x Gainsborough Engineering Co. mobile outfeed conveyor. Infeed - 200mm. Outfeed - 1000mm. 1 x OCS Checkweighers GmbH HC check weigher (2017) to weigh up to 30kg. Type - HC. Weigh table dimensions - 800mm long x 60mm wide. 1 x Declined roller conveyor on height adjustable feet, all stainless steel. Roller bed width - 800mm. Overall dimensions - 1210mm long x 880mm wide x 870mm high (+130mm max). *Please note - if you require a metal detector for this line then please enquire with us, we can supply a suitable unit* Please contact for more details and to arrange a viewing.

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Djdpfxeydnxns Afnjcc Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Carrera 2000 PC Dodpfsd I Ncgsx Afnjcc stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: excellent (used), functionality: fully functional, 1 x Wraps (UK) Ltd automatic sleeve sealer with heat tunnel and gravity conveyor. Auto Sleeve Sealer: Model - AI60-351. Serial number - 3281. Belt width - 450mm wide. Previously used for 280mm wide film. Overall dimensions - 1450mm long x 1350mm wide. Heat tunnel: Model - M60-35TR. Dcedpfx Ajyg Smbsfnoc Serial number - 3279. Belt dimensions - 1950mm long x 530mm wide. Aperture (tunnel) - 620mm wide x 405mm high. Overall dimensions - 2020mm long x 1250mm wide x 1780mm high. Outfeed gravity roller conveyor: Roller width - 490mm wide. Overall dimensions - 2020mm long x 505mm wide x 970mm high.

Year of construction: 2007, condition: excellent (used), REF: MM5765 1 x Record Packaging Machinery flow wrapper with Domino V230i thermal transfer overprinter and infeed conveyor. Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Model - Scorpion MD SP. Date of manufacture - 2007. Speed - between 20 to 120 packs/minute (depending on product size). Sealing jaws - 350mm long. Infeed conveyor - 185mm wide. Outfeed conveyor - 220mm wide. Dedpfx Afeukw Nbjnecc Previous use - for packing cereal bars and biscuits. Overall dimensions - 4670mm L x 1350mm W.