Used Film Packer for sale (1,677)

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 85 EVO The Minipack Replay 85 EVO is a mobile, manual shrink wrap machine with a hood, designed for large products and larger packaging formats. – Mobile, manual shrink wrap machine with hood – Output of up to 300 packages per hour – Usable sealing bar dimensions: 840 × 590 mm – Max. product dimensions: 800 × 590 × 300 mm – Max. film roll dimensions: Ø 300 × 800 mm Nlsdex Tr R Uepfx Akioh – Working table height: 940 mm – Machine dimensions (closed): 1,950 × 1,000 × 1,180 mm – Machine dimensions (open): 1,950 × 1,000 × 1,480 mm – Machine weight (net/gross): 212 / 264 kg

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. Nljdszdtflopfx Akish The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Available from March 2027 offer consists of: laminating machine Gemini C 400 A - developed for a digital printing machines outputs lamination - pneumatic system of laminating rollers pressure with an easy thrust control - Anti-Curl-Mechanic Technical details: - feeder: flatpile feeder; loading height: 230mm - Format: min. 320x250mm; max. 380x580mm - Paperweight: 115-350g/qm - film: 20-45 µm - film-types: OPP, Nylon - Inner diameter roll: 70-80mm Nleds Adq A Sepfx Akish - outer diameter roll: max. 400mm - capacity: 0-15m/min; max. 1800 sheets/h with Format B3 - warming up time: approx. 10 Min - weight: 365kg - power supply: 230 V, 2,3kW, 16A - floor space: : 74 x 280 cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2011, offer consists of: laminating machine Gemini C 400 A - developed for a digital printing machines outputs lamination - pneumatic system of laminating rollers pressure with an easy thrust control - Anti-Curl-Mechanic Technical details: - feeder: flatpile feeder; loading height: 230mm - Format: min. 320x250mm; max. 380x580mm - Paperweight: 115-350g/qm - film: 20-45 µm - film-types: OPP, Nylon - Inner diameter roll: 70-80mm - outer diameter roll: max. 400mm - capacity: 0-15m/min; max. 1800 sheets/h with Format B3 - warming up time: approx. 10 Min - weight: 365kg - power supply: 230 V, 2,3kW, 16A - floor space: : 74 x 280 cm We can also organize the following for you: Nodpfx Akj Adq I Ieielh packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0748, film width: 400 mm, compressed air connection: 6 bar, number of blades: 1, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this used Ravizza Packaging SRL SIMPLICITA BAG SMART 400H pouch-making machine, manufactured in 2021. Manufacturer: Ravizza Packaging SRL Model: SIMPLICITA BAG SMART 400H Year of manufacture: 2021 Condition: used Category ID: 536 Type ID: 1939 Nljdpfxs Ad Ivpe Akijh Machine type: pouch-making machine For sale is a high-quality packaging system from the manufacturer Ravizza Packaging SRL (Italy). Additionally equipped with: EIDOS Swing Mk II thermal transfer printer integrated conveyor belt film feed existing film rolls as shown in the photos Condition: The system is in good condition and was used in production until recently. Normal signs of wear and tear corresponding to its age and area of application are present. An inspection and demonstration of the machine's functionality are highly recommended and can be arranged by appointment. Collection: The machine is located in Germany, 63589 Linsengericht, and is available for inspection and collection. Loading can be supported upon agreement.

Condition: used, Year of construction: 2003, Format: 340 mm Equipment: Film thickness: Processes hot laminating films up to a maximum of 2 x 0.250 mm (250 microns) Variably adjustable from approx. 1 to 1.5 meters per minute Heated laminating rollers paired with an additional pair of output rollers for a bubble-free result Nodpfs Afn Hdsx Akijlh Control: Automatic temperature regulation and digital control of all settings via an LCD display

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm Nledpfow Rrcwsx Akieh air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Condition: new, dimensions: innen 1160 x 580 x 580 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 120 kg total power requirement 1,2 kW weight 115 kg range L-W-H 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger Nodpfxjxak Dqs Akiolh * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Year of construction: 2008, condition: good (used), KARVILLE Tornado 2500 – overhauled in 2020! Year of Manufacture: 2008 _____ Machine Specifications and Equipment: Tornado - Electric Tunnel The newest addition to our product line, the tornado tunnel is an electric shrinking system ideal for use on steam sensitive applications. With the capability to create a superior shrink appearance similar to steam tunnels on almost any container shape, this tunnel generates a compact solution to applications where high quality shrinking is required and the use of steam is not acceptable. The Tornado provides the best solution for:  Shrinking for Difficult Shaped Containers  Shrinking for Water Sensitive Products  Shrinking for Heat Sensitive Containers like PET  Eliminating after-shrink wrinkles  Saving Energy - High Efficiency Design  Saving Space - No Need for Extra Leister Guns and Special Rotation Systems  Minimizing Mechanical Maintenance - Simple Machine Structure  Eliminating the need for Steam Boiler and Infrastructure. This is ideal for blow molders, contract packers and thermoformers. _____ Accessories Included: Nledpfovxkatsx Akioh  Manuals  Keyes  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2014, condition: good (used), Used SEALPAC RE25 Thermoforming Packaging Machine (MAP/Vacuum) This SEALPAC RE25 thermoforming machine is a high-quality, industrial-grade packaging system designed for continuous operation in food production environments. Built in the Netherlands, SEALPAC machines are known for their durability, hygiene, and consistent sealing performance. This unit is in good used condition Technical Overview Model: RE25 Power: 3-phase (230/400V, 50–60 Hz) Power consumption: ~17 kW Nodpfeyvr Irjx Akislh Compressed air: 6–7 bar Gas (MAP): 4–6 bar Film width: approx. 300–650 mm Max forming depth: up to 160 mm Machine length: approx. 8 m. Contact Us Get in touch for: Price Inspection Additional details or videos

Condition: used, Year of construction: 2000, • Max. imaging format: approx. 505 × 525 mm • Max. film width: approx. 530 mm Nsdpfx Akowv Ea Usielh • Material thickness: up to approx. 0.10 mm • Resolution: up to 200 lpi (256 grayscale levels), optionally up to 400 lpi with Delta Technology • Accuracy: ± 0.2 mil (0.005 mm) across the entire image area and with multiple films • Speed: up to approx. 1,320 mm/h film length • Interfaces: High-Speed Bitmap/SpeedWay Interface, RIP connection • Power supply: 100–240 V AC, 47–63 Hz (single-phase RIP), main unit 3-phase supply • Dimensions (L × W × H): approx. 1,200 × 750 × 1,100 mm • Weight: approx. 250–300 kg • Operation: daylight-loading, exposes film or RC paper, optional CTP plates (polyester)

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter Nodjz Hxp Sspfx Akielh • electrical control unit • compressor.

Condition: used, mileage: 131,605 km, power: 390 kW (530.25 HP), first registration: 08/2024, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XF 530 NGD PXP PATINA GREEN Climate Package Chassis design front: Bottom plate Headlights without height adjustment LED daytime running lights Fixed cab entry Air-suspended cab Sleeper High Cab Laminated glass with sun protection film Central locking Windscreen with sun protection film Rear window: double glazed External sun visor Two LED lights for rear cab wall Headlamp washer Signal horns, 2 sets LED skylights, additional LED lights cab roof, prewired Reversing camera, prewired DAF Corner View LED headlights and fog lights Chassis color red Cab interior trim: textile Driver's side roller blind Dashboard table Dashboard type: Vision Auxiliary heater with heat pump and timer Power windows Pollen filter Interior trim color: luxury Steering wheel, leather Roof hatch with electric operation Integrated stationary air conditioning Driver’s seat: Super Air Passenger seat: cinema and table function, Alcantara covering Door trim: loosely woven fabric Cabin, interior decoration: Argenta Xtra Comfort mattress for lower bunk Luggage compartment Automatic cab climate control Safety net on both bunks Curtains with partition curtain Refrigerator and drawer Armrests on both sides of driver's seat Auxiliary power supply: standard + 2x 40A LED interior lighting: luxury ECAS remote control with extended functions Adaptive Cruise Control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Predictive Cruise Control Digital tachograph, VDO 1C, Version G2V2 DAF Infotainment Exclusive prepped, luxury speakers Antennas: DAB prepped radio, 2x mobile, GNSS extra: CB Electronic Stability Control (VSC) Standard immobilizer Lane departure warning system Reverse warning system Turning assistant Main switch chassis Stabilink rear axle suspension Front axle 1, 8,000 kg, load index 156 Rear axle 1, 12,600 kg, load index 148 Rear axle capacity 13.0 t Axle load monitoring Front: 8.0 t, parabolic, 183N Rear: Air suspension SR1347 Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Nlodpfx Akjz Rruqsieh Idle shut-off automatic, 5 minutes Automated transmission, TraXon, 12-speed Traction control (ASR) Emission standard Euro 6 ECO performance Rear axle ratio 2.69 Mechanical differential lock 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 HP, cab badge: 530 Driven rear axle with disc brakes MX engine brake and ZF intarder Front underride guard Rear mudguard Catwalk step left Work lights, LED Wheelbase 3.60 m / rear overhang 0.75 m Catwalk with extra-long step Aluminum air tanks LED tail lights 430-liter aluminum fuel tank left, height 620 mm JOST JSK37CW, cast iron, low-maintenance, 185+40 mm Electrical couplings trailer 24V/15-pin cable: 15-pin + EBS First gearbox PTO NH/4c-R-32/25 Rear-mounted engine PTO, 13 h continuous, pump drive Battery charge monitoring Heated fuel pre-filter PAUL PXP (GER) for CF or XF – FT, right box, 2 years A-sign Side window wind deflector DAF tablet for navigation 2 work lights (9 LEDs) rear cab lower Socket for electric sliding roof 2x rear strobe lights incl. separate switch Lift axle switch Compressed air gun in cab CB radio 80 channel Tipper hydraulics incl. separate tank 200l (OEM) Hydraulic pump 100L Swing arms DAF logo illuminated Reversing camera

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Controls: Siemens SIMATIC touchscreen, PackML Drives: SEW, servo-controlled Nedpfjz I Inajx Akislh Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Machine number: 2511

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 2,000 kg, The machine cuts A4 or A3 formats into sets of 100 or 200 sheets and simultaneously packs this quantity into slip lid boxes, so that the operator only needs to close and seal the lid. Ideal for materials such as photo paper, inkjet films, and all desktop products distributed in A4 boxes for the home office. Max. master roll width: 1280 mm. The machine is fully functional and connected. Test cutting is possible at any time. We also handle professional dismantling and loading onto a truck/container. Njdoxvrm Sjpfx Akiolh

Year of construction: 2010, operating hours: 3,037 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 139737, Multivac R-145 thermoformer from 2010, in excellent condition and recently removed from production. It can be used for both soft and hard film. Film width: 420 mm. Includes 4 moulds: No. 1: 375 x 184 mm, maximum depth 100 mm. No. 2: 355 x 187 mm, maximum depth 65 mm. No. 3: 1:2, 132 x 95 mm. No. 4: 1:3, 190 x 110 mm. Built-in vacuum pump and MAP machine. Nedpfxjz I Dfze Akielh

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total length: 1,120 mm, total height: 1,490 mm, total width: 660 mm, type of input current: AC, product height (max.): 120 mm, product height (min.): 1 mm, product length (min.): 50 mm, product length (max.): 430 mm, product width (max.): 290 mm, product width (min.): 50 mm, input voltage: 230 V, input current: 13 A, overall weight: 100 kg, power: 3 kW (4.08 HP), film width: 400 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), table width: 320 mm, table length: 460 mm, Equipment: documentation/manual, 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine – UNUSED – As New Used 2017 Robert Seal Corp SC346 heat shrink wrapping machine for sale. Never used from new, single phase, compact shrink wrapper, excellent condition. Machine Manufacturer: Robert Seal Corp. Model: SC346 Machine Type: Heat Shrink Wrapping Machine Year: 2017 Condition: Never used from new. High-Quality Heat Shrink Packaging Machine for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine, supplied new and never used from new. The machine is in very good / as-new condition, making it an excellent opportunity to acquire a modern shrink wrapping system at a fraction of new cost. Designed for efficient, professional heat-shrink packaging, this compact and reliable machine is ideal for manufacturing, food, print, distribution, e-commerce, and general packaging applications. Key Features & Benefits Robert Seal Corp SC346 Heat Shrink Wrapper Manufactured 2017 Never used – unused stock Compact footprint Simple, reliable operation Single-phase power – easy installation Ideal for small to medium production runs CE marked Technical Specifications – Robert Seal Corp SC346 General Machine type: Heat Shrink Wrapping Machine Model: SC346 Nlodpfxsydqm Ij Akish Year of manufacture: 2017 Condition: Very good – never used Supplier: Robert Seal Corp CE compliant Power & Electrical Power supply: 230V – 1 Phase Frequency: 50 Hz Installed power: 3.0 kW Current: 13.6 A Dimensions & Weight Overall machine dimensions: Length: 1120 mm Width: 660 mm Height: 550 mm Machine weight (without stand): 69 kg Working table height (on stand): 940 mm Sealing & Packaging Capacity Sealing area: 320 × 460 mm Minimum package size (A × B × C): 50 × 50 × 1 mm Maximum package size (A × B × C): 430 × 290 × 120 mm Note: B + C must not exceed 350 mm Film type: Centre-fold shrink film Maximum film thickness: 60 gauge Typical film dimensions (D-F-E): 400 × 250 × 75 mm Operating Characteristics Acoustic noise level: 71.8 dB Compact, energy-efficient heat tunnel Suitable for continuous or intermittent operation Ideal Applications Product shrink wrapping Food & beverage packaging Printed materials & cartons E-commerce fulfilment Contract packing operations General manufacturing & distribution Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used & unused machinery Machines honestly described and inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 1997, Used Machine Year of manufacture: 1997 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding of solid wood Nlodpfx Aoz A H Eyjkish - Calibration of workpiece carrier panels - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibrating roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,100 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 160 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW - Dimensions: 1840 x 1670 x 2200 mm - Weight: approx. 2000 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Nsdpfx Asz A Ty Djkielh Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Nlsdpfxez A Tzbe Akioh Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Nedpfxez A T Dcs Akiolh Material: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Njdoz Ip S Hjpfx Akijlh Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Nlsdpfx Akez Iqp Tjish Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; Nedpfxsz Irr As Akielh – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: new, Year of construction: 2026, overall weight: 260 kg, total length: 25,080 mm, total width: 15,000 mm, total height: 24,250 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our pallet wrapper "Basic" is a semi-automatic stretch wrapper from Eurapa production, which guarantees absolutely consistent results due to up to 10 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be adjusted to your requirements and saved in the programs. The programs also allow you to set how fast the film carriage and turntable run. Head and foot windings can also be saved for each program. In this way, you can store individual programs for each wrapping pattern to achieve perfect wrapping results every time. With a weight of 260 kg, this model is suitable for loads of up to 1200 kg. Our Basic pallet wrapper has a 1500 mm turntable and can wrap pallets up to 2000 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course, as are adjustable head and foot wraps. If the wrapper needs to be used at a different location in the meantime, it can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you want a good and affordable pallet wrapper that can be adapted to your needs. About us: Nlodpfx Akez E Il Hsieh Business is done between people - we are convinced of that! A supplier delivers the ordered goods - a partner can do more: he helps you to find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!