Used Film Packaging Machine for sale (72,785)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, controller model: Simatic S7-1500, total length: 8,480 mm, film width: 460 mm, roll diameter: 400 mm, machine/vehicle number: 20-042, production capacity: 10 unit/h, No minimum price – guaranteed sale to the highest bidder! The new price of the thermoforming vacuum packaging machine was EUR 255,000 plus VAT! TECHNICAL DETAILS Todpfx Akjzkgbyjiod Film Bottom film width: 460 mm Bottom film: Soft film PA/PE, max. 350 µm Top film width: 455 mm Top film: Soft film PA/PE, max. 100 µm Film roll diameter, top film, max.: 400 mm Film roll diameter, bottom film, max.: 400 mm Performance and format Draw length: 300 mm Thermoforming depth, max.: 190 mm Adjustable output: 7 - 10 cycles/min MACHINE DETAILS Control system Touch panel: 12" Controller: Simatic S7-1500 Operating language: German Electrical and media connections Mains voltage: 400 V Mains frequency: 50 Hz Compressed air consumption: approx. 600 - 1,250 l/min Compressed air connection: 3/4" - DN 19 Cooling water consumption: approx. 80 - 150 l/h Water connection: 1/2" - DN 13 Machine dimensions Tool spacing: approx. 3,900 mm Free infeed path: approx. 1,997 mm Machine length: approx. 8,480 mm Outfeed belt, usable length: approx. 550 mm Machine height: approx. 1,965 mm EQUIPMENT Modular construction made of stainless steel Standard film rolls with a film core diameter of 3" / 76 mm Kne lever system for the forming and sealing station Memory-programmable controller with a swiveling operating terminal Fumigation system SWZ with a stainless steel tank and a storage volume of 5 liters Safety devices with magnetic and light curtain protection Automatic lubrication system for the film transport chain Outfeed belt Intralox Blue 950 mm, usable length 550 mm Format parts for several packaging and forming sizes

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale, available from our location in 45891 Gelsenkirchen, is a set of two ULMA VTI 440 packaging machines. The packaging machines were manufactured in 2023, are used, and come from a business liquidation. Tsdpfx Aksz Izy Njijd Currently, the packaging machines are still connected to the power supply and can be inspected after scheduling an appointment. For technical data, please contact the manufacturer. Dismantling and loading are the responsibility of the buyer.

Condition: new, Year of construction: 2009, operating hours: 69 h, functionality: fully functional, Mediseal / Körber P-1500 Cartoning Machine for Vials and Eye Drop Bottles – Year of Manufacture: 2009 For sale: a high-quality, intermittently operating, horizontal cartoning machine of the type Mediseal (Klöckner) P-1500, designed for pharmaceutical applications. The machine is suitable for both vials and eye drop bottles as well as comparable primary packaging formats. The system was purchased as new but has never been used in production. Only FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) were performed. With just 69 operating hours, the machine is in virtually as-new condition. Technical Description • Max. output: up to 150 cartons per minute • Operating mode: intermittent, horizontal • Product infeed via magazine, starwheel, and product chain • Automatic erecting of folding cartons using vacuum grippers • Automatic insertion of products and package leaflets • Fully automatic leaflet feeder (RonTech) • Progressive carton closing, outfeed to the right • Option for color code embossing on carton flaps Carton Size Range • Length (C): 65 – 150 mm • Width (A): 35 – 90 mm • Height (B): 15 – 95 mm Formats / Flexibility • Currently equipped with format parts for 5 ml, 10 ml, and 15 ml eye drop bottles • Includes all necessary format and change parts • Highly flexible machine, suitable for additional bottle, vial, and product formats • Fast and reproducible format changes Features • Operation via touchscreen (all controls at eye level) • Operating manual in German and French Machine Data • Manufacturer: Mediseal, Körber (formerly Klöckner), Germany • Model: P-1500 • Machine No.: 43 • Year of manufacture: 2009 • Electrical connection: 220/400 V, 3 Ph, 50 Hz • Required space: approx. 6,250 × 2,800 × 2,200 mm • Weight: approx. 3,500 kg Condition • Unused, virtually as new • Never put into production • Only FAT and SAT performed • Only 69 documented operating hours Original price in 2009 • approx. €700,000 - €750,000 with one format set Videos showing machine in operation available Price Todpjx Nx Daefx Akijd On request

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, roll carrier for cardboard roll -Roller carrier: Winding roll for packaging machine -Roller: Ø 75 x 1700 mm -Drive shaft/mount: Dimensions see photos Todjxmi Hkjpfx Akied -Dimensions: Ø 95 x 1880 mm -Weight: 35 kg

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Tedpjkn Rz Hefx Akiod Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine Tjdpfsxmi H Rjx Akiod -Roll: Ø 148 x 1600 mm -Drive shaft/mount: Dimensions see photos -Dimensions: Ø 148 x 1870 mm -Weight: 38 kg

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, winding roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine -Roll: Ø 75 x 1700 mm -Drive shaft/mount: Dimensions see photos -Dimensions: Ø 95 x 1880 mm -Weight: 35 kg Tsdpjxmi H Dsfx Akijd

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Tedpfsxqf U Sjx Akisd Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Year of construction: 2004, condition: excellent (used), The Multivac R230 packaging machine is an advanced machine used mainly in the food industry for packaging a variety of products such as meat, cheese, seafood, delicatessen and many others. This machine is designed to create thermoformed packages, using vacuum to maintain the freshness and quality of the packed products. Equipped with a Busch RA 0100B vacuum pump and constructed of stainless steel, the Multivac R230 is designed to work with a film width of 320mm and has features such as various forming and cutting configurations. Its use is common in many branches of the food industry, from bakeries to meat and fish processing. Tjdpsvzt Huefx Akiod

Condition: excellent (used), Year of construction: 1999, CFS 620 | Thermoforming Packaging Machine Brand: CFS Model: 620 Machine number: 625/0118 Year of manufacture: 1999 Todpfsy Hl Ndsx Akiod Power supply: 230 V, 3 phase, 50 Hz Current consumption: 23/25 A Module dimensions: Main module: 3350 mm x 1300 mm x 1900 mm Additional module: 3300 mm x 1050 mm x 1100 mm The industrial CFS 620 thermoforming machine is an advanced unit designed for the automatic forming of packages from rigid or flexible film and for packaging food and technical products. The machine operates in a continuous cycle, performing the processes of lower film forming, filling, vacuum or protective gas flushing, sealing, and cutting of finished packs. Thanks to its modular design with a total length exceeding 6 meters, the unit offers a large loading area and high production efficiency.

Year of construction: 2009, condition: used, Mepac heavy duty vertical bagging machine for bulk productions. Tsdpfxjxt Ib Hj Akiod

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine Todpfoxmi E Tsx Akiod -Roll: Ø 75 x 2040 mm -Shaft: Ø 44 x 330 mm -Drive wheel: Ø 188 mm / Dimensions see photos -Dimensions: Ø 198 x 2760 mm -Weight: 55 kg

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 16238, total length: 12,600 mm, total height: 1,500 mm, total width: 1,475 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 80 mm, product length (min.): 80 mm, product length (max.): 200,000 mm, product width (max.): 450 mm, product width (min.): 14 mm, input voltage: 400,230 V, working height: 900 mm, overall weight: 1,900 kg, input frequency: 50 Hz, space requirement width: 3,000 mm, This machine was bought in 2015 and has only been installed, calibrated and tested. We have never been in commercial use. Has only been stored in our room temperated warehouse. We planned to use it for own production, but not all plans are realized. Tsdpfxezzybhj Akied So this is a brand new packaging machine with roller conveyers and heat tunnel. All documentation is avaliable. The machine is located in Norway and can be inspected and tested here. We paid € 70.000,- for this machin inclusive heat tunnel and roller conveyors in 2015

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Tedpszvp Uysfx Akisd

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. Tedpfx Akjw Ryt Deijd - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: ready for operation (used), Year of construction: 1998, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Packaging machine for automatically sealing cardboard boxes on both the top and bottom with packaging tape. Ideal for efficiently processing boxes in warehouses, production environments, and logistics departments. Ensures a neat and secure seal, making the boxes ready for storage or transport. Video available upon request. Tsdez R A Syepfx Akied

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Tedpfx Aozn Iqqokisd Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. We also have other machines of the same design available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A-240401, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 400 mm, overall weight: 450 kg, type of input current: three-phase, total length: 3,000 mm, total width: 1,500 mm, total height: 1,850 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 3 A, year of last overhaul: 2026, cutting height (max.): 140 mm, conveyor belt width: 400 mm, Equipment: compressor, Object A240401. Rebuilt Hoba semi-automatic (hand) packing conveyor with Hoba clip closing set. Hoba hand packaging conveyor, including bag blowing table and Hoba clip closing machines, model Holly SL. Machine direction: Right to Left. Todpez Eup Ssfx Akied Machine information: Total machine length: 3.0 meters Total machine width: 1.5 meters (including bag blowing table). Total machine height: 1.7 meters Machine working height: 0.85 meters Length of input conveyor used: 1.8 meters Length of discharge belt used: 0.85 meters Flight distance: 305 millimeters Machine capacity: 1800 packages per hour. Electrical data: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: Cee-Form 5-pin 16 Amp. (round red plug). Compressed air: Yes, required. Minimum and maximum product dimensions: Products from 100 to 400 mm long. Products from 80 to 210 mm wide. Products from 40 to 160 mm high. Machine version: Frame and legs (2) made of painted steel construction, manufacturer Hoba. Deck, guides, and flights are made of stainless steel ASI 304. Brush machine, manufacturer Hoba. Clip closing machine, manufacturer Hoba, Holly SL (clips Kwiklok type JNRP). At the end of the transporter, there is a roller deck, length 0.85 millimeters. Machine equipped with a safety guard at the beginning of the roller deck. Machine stands on wheels (mobile). Fixed carrier speed. New electrical installation on the packing track. Machine is completely rebuilt. Machine description: Packing track, machine suitable for packaging food and non-food products in foil bags.

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: 2200268., We sell an automatic packaging machine (stretch film packaging machine, tray packaging machine ), ULMA model COMPACT, MFG 1999, SN: 2200268. Packaging for trays with stretch film including Bizerba scale type: 18-A (max 3/6 kg, min 20 gr) and Bizerba labeller GH both with serial number: 1713392 Ulma data: electrical power 1.2kw, 400V voltage, frequency 50/60 Hz and consumption of 5A. Technical characteristics: Reduced space required. Fully automatic operation. Semi-automatic coil change. Packaging with PVC, Polyethylene and Polyolefin films. Anticorrosive construction. High wrapping quality with minimum film consumption. Wrapping of products without tray. Tsdpfx Ajuiq Dbskied Approved according to E.C. regulations. packaging machinery. It is the ideal choice for the different food sections of small and medium-sized points of sale where, integrated with manual weighing and labelling systems, a significant speed and production rate are required, while maintaining small dimensions and ease of use. IMPORTANT: The machine is sold in a non-functional state, with no knowledge of the eventual error. The buyer should repair it or use it as a spare parts donor. Price Euro 1,900 Euro + VAT, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm Tjdpfx Akjzhv Rljied -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Condition: used, functionality: unexamined, machine/vehicle number: M-0426, Year of construction: 2009, Carton folding and packaging machine LANGEN chinook C08-1150, No. M-0426 with presorter Tjdpjxhd S Defx Akiod Fully assembled in a tent.

Condition: used, Year of construction: 1990, The Adolf Illig SB 53C - DIN is a used skin and blister packaging machine (universal vacuum thermoforming machine). It was developed for the economical production of transparent blister packaging and for the direct skin packaging of products onto cardboard backing cards. The used skin and blister packaging machine was installed at a university and used exclusively for teaching purposes. Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Technical doc.: Yes Condition: Second hand Price: By request Power consumption & electrical system: Heating capacity: 4.5 kW (provided by 15 ceramic surface heaters for uniform heating) Drive motor power: 1.24 kW Vacuum system: Maximum vacuum level of 0.95 kp/cm² (frequently operated with Busch vacuum pumps) Air consumption: Approx. 30 litres per working cycle. Film roll holders: Film roll diameter for Blister packaging: Max. 400 mm Film roll diameter for Skin packaging: Max. 350 mm Film roll core diameter: 70 mm. Format ranges & capacities: Maximum forming area: 405 × 500 mm Packaging / cardboard size: 400 × 495 mm Maximum draw depth: 100 to 150 mm (both positive and negative forming possible) Maximum packaging height: 150 mm Todpfx Aoxm Sa Hjkisd Film width: 445 mm. Dimensions and weight: Machine dimensions: Approx. length 1.600 mm × width 1.135 mm × height 2.710 mm Empty weight: Approx. 500 kg.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 160,857 h, functionality: fully functional, machine/vehicle number: 396, type of input current: AC, input voltage: 400 V, compressed air connection: 8 bar, sheet thickness aluminum (max.): 80 mm, pressure: 16 bar, film width: 560 mm, roll diameter: 1,200 mm, overall weight: 3,000 kg, input current: 48 A, heating capacity: 19.4 kW (26.38 HP), Equipment: cooling unit, documentation/manual, ILLIG RV 53 Thermoforming Machine + a cooling unit – PS, PVC, PET & Other Thermoplastics The machine is suitable for the production of thermoformed products from PS, PVC, PET and other thermoplastic materials. Tedpfx Aksz Hi Ileisd The machine has been regularly maintained and well cared for throughout its operating life. It has only been used for approximately a few hours per day on average, resulting in relatively low operating hours for a production machine of this type. The machine is still in operation, allowing prospective buyers to inspect it under working conditions. A live demonstration is available by prior appointment. This is a good opportunity to acquire a well-maintained ILLIG RV 53 thermoforming machine with the advantage of being able to inspect and test the machine in actual production before purchase. Further technical specifications, photographs and additional information are available upon request.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, total length: 3,600 mm, Model NO. HB-800 PAPER BOX ERECTING MACHINE Application Commodity, Gifts & Arts, Dining, Medical, Food Driven Type Electric Specification 3600 x1400 x 1700 mm Production capacity: 40-160 pcs/min Suitable Material: 200-600gsm card paper,PE coated paper, kraft paper, corrugated paper(up to 1.5mm) Paper open length: L100-450mmdegree:5°-40° Tjdsz Iqfhspfx Akied Paper open width: W100-600mm HeightH15-200mm (for special sizes can be customized) Total power - 5kw Total weight 1.8 ton

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Tedpsv D Ezijfx Akied Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.