Used Falling Film Evaporators for sale (2,089)

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N Fjdpfx Aiezk Nmrokspp - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: used, mileage: 5,700 km, power: 592 kW (804.90 HP), fuel type: gasoline, gearing type: automatic, first registration: 04/2025, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, soot filter, G63 AMG, fully equipped: additional features: Performance upgrade to 800 hp H&R lowering springs Complete vehicle wrapped in transparent, self-healing XPEL film (including headlights and side skirts) Fpjdpoyq U Aasfx Aikjp 3-layer ceramic coating on vehicle, rims, and brake calipers Hesreller warranty until 04/2027 Inspection service due in 04/2026 at 4200 km Equipment: B01 48V TECHNOLOGY B24 Remote control for auxiliary heating B61 AMG DYNAMIC SELECT CK0 AMG-specific exhaust system in black C51 Illuminated door sills, 4-piece, in stainless steel FL0 Partition net FM2 Warning vests for driver and passenger GK2 MANUFAKTUR logo package in black E20 MANUFAKTUR logo projector in the exterior mirror T91 MANUFAKTUR door handle in black with logo embossing G44 AMG SPEEDSHIFT TCT 9G L6J AMG Performance steering wheel in Nappa leather PAZ AMG Night Package I ICS1 Mercedes star front and rear in high-gloss black 7U1 AMG emblem on the hood in dark chrome 7U8 Typography in high-gloss black PBG MBUX Navigation Premium PK1 Comfort Package 231 Garage door opener 311 Temperature-controlled cup holder 889 KEYLESS-GO 897 Wireless charging system for mobile devices in the front PK2 Active Multicontour Seat Package Plus PBR ENERGIZING Package Plus HA1 Ionization of the interior air PT1 Technology Package PA8 Parking Package with 360° camera 04U Transparent hood 501 360° camera P79 Assistance Package 234 Blind Spot Assist 239 Active Distance Assist DISTRONIC 266 Active Steering Assist 273 Exit warning function PT3 AMG Performance Package A22 AMG ACTIVE RIDE CONTROL suspension BS2 AMG brake calipers, red painted, front and rear RG4 55.9 cm (22") AMG forged wheels in cross-spoke design 250 AMG Driver's Package 256 AMG TRACK PACE PW1 Heat Comfort Package 443 Steering wheel heating 597 Heated windshield P77 SUPERIOR Line interior JC1 Instrument panel in Nappa leather 414 Sliding sunroof 810 Burmester® 3D surround sound system P82 GUARD 360° vehicle protection Plus 551 Anti-theft alarm system with pre-equipment for collision detection 882 Interior protection Q55 Trailer coupling with ESP® trailer stabilization RS1 Spare wheel on the rear door S39 MANUFAKTUR safety belts in red S81 Diamond design T81 MANUFAKTUR running boards in black U19 MBUX Augmented Reality for navigation U82 2 USB ports in the rear U88 AMG steering wheel buttons VG0 Set of rubber floor mats V36 MANUFAKTUR grab handles in leather V42 AMG floor mats black Y51 Loading edge protection in stainless steel ZG6 AMG interior trim in carbon ZT7 Trim element in the grab handle with "MANUFAKTUR" lettering 01Q LOW RANGE 01U Pre-equipment for navigation services 02B Owner's manual and service booklet - German 02Q 100% differential lock 06Q OFFROAD COCKPIT 14U Smartphone integration 20U Pre-equipment for digital key transfer 22U MBUX Entertainment 220 Parking assistant PARKTRONIC 228 Auxiliary heating 235 Active Parking Assist with PARKTRONIC 243 Active Lane Keeping Assist 299 PRE-SAFE® system 32U Sound personalization 34U Remote Services Premium 351 Mercedes-Benz emergency call system 355 Extended functions MBUX 362 Communication module (LTE) for the use of digital extras 365 Hard disc navigation 367 Pre-equipment for Live Traffic Information 475 Tire pressure monitoring system 51B Rating country set EURO-NCAP 513 Traffic sign assistant 534 MBUX multimedia system 537 Digital radio 6U6 AMG fuel tank cover 628 Adaptive Highbeam Assist Plus 642 MULTIBEAM LED 773 AMG Carbon Package Exterior B28 AMG exterior mirror housings in carb

Condition: new, Year of construction: 2024, functionality: fully functional, The REPLAY evo range offers basic products without sacrificing excellent quality. Equipped with advanced new and exclusive systems, it represents the most competitive solution of the new machines with bell from minipack®-torre. REPLAY 55 evo combines technological performance with essential and compact shapes, without sacrificing the excellent quality that characterizes minipack®-torre machines. - Power supply V 200/230 Fpodpfeuakl Hjx Aikep - Phase ph 1 - Installed MAX power kW 3.15 - Production per hour p/h (pph): 0-300 - Sealing bar useful dimensions: 540x390 mm - MAX product dimensions: 500x380x200 mm - MAX coil dimensions (diameter): 250 mm - MAX film reel dimensions (width): 600 mm - Work table height: 940 mm - Machine dimensions with protective cover open: 1260x810x1400mm - Machine dimensions with closed protective cover: 1260x810x1190mm - Machine weight (net/gross): 105/126 kg

Condition: used, Mathis THN 10988 Laboratory Thermosoling System Application: This combination of a padding machine and a dryer has proven to be extremely effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Dryer THN Fpsdpeu D Arijfx Aiksp If all the aforementioned applications are to be ensured and the use of frame racks is also desired when the dryer is operated independently, the THN type is preferable. The standard frame racks are suitable for a sample size of max. 50 x 50 cm (larger frame racks are available upon request). If all the above-mentioned application possibilities are to be ensured and the use of frame racks is also desired for the stand-alone operation of the dryer, the THN model is preferable. The standard frame racks are suitable for samples up to a size of 50 x 50 cm (larger frame racks are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, mesh fabrics, non-woven fabrics, etc., as well as clamping frames for foils and paper are available. Drying chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the dryer. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle compartment. A control flap allows the ventilation to be regulated evenly from above and below or the airflow from above or below. Fan and heater A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating capacity, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance and increases the operational safety of the dryer. The heating capacity is designed for rapid heating and is automatically reduced after the desired temperature is reached in order to avoid unnecessary power surges. The temperature is controlled electronically in the range of 20–250 °C. Fresh air is directed directly into the recirculating air fan via a fan. The desired airflow can be adjusted using a step switch. Technical data Air speed approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Heating capacity approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Dimensions (L x W x H): 4800 x 1380 x 1750 mm Purchase price: €86,275 You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: used, EA Elektro Automatik Type: EA-EL 9080-170 B Electronic DC load, USB / Analog / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type Socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNom Overcurrent protection range 0...1.1 * INom Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setpoint values Δ / K Current / Voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNom Display: Accuracy ≤ 0.1% UNom Remote sensing compensation Max. 5% UNom Current regulation Setting range 0...173.4 A Stability at ΔU < 0.1% INom Accuracy (at 23 ± 5°C) ≤ 0.2% INom Display: Accuracy ≤ 0.1% INom Rise time 10...90% INom < 23 μs Fall time 90...10% INom < 46 μs Fpsdsuv Eudepfx Aikep Power regulation Setting range 0…2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance regulation Setting range 0.04…15.3 Ω Accuracy (at 23 ± 5°C) ≤ 1% of the resistance end value + 0.3% of INom Display: Accuracy Included in the accuracy of the setpoint value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, Remote control on/off, R-mode on/off Status signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation to the device Max. 400 V DC Sampling rate Setpoint inputs 500 Hz Isolation: Input (DC) to housing DC-minus: permanently max. ±400 V DC-Plus: permanently max. ±400 V + max. input voltage Input (AC) to Input (DC) Max. 2500 V, briefly Climate: Cooling method Temperature-controlled fan Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x Master-Slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, EtherCAT Galvanic isolation to the device Max. 400 V DC Connections: Rear Share-Bus, DC input, AC input, Sense, Analog interface, USB-B, Master-Slave bus, Interface module slot Front USB-A Dimensions: Housing (W x H x D) 19" x 2 U x 464 mm Total (W x H x D) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Documents & Downloads Datasheet: Operating manual Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, lifting height: 7,200 mm, fuel type: electric, General information Year of manufacture: 2014 Weights Empty weight: 1.750 kg Functional Lifting capacity: 200 kg Working height: 920 cm Dimensions of cargo space: 190 x 79 x 176 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Fpedpfex H Ncuox Aiksp Additional information Please contact Christian Theißen for more information Manufacturer: Imer Model: IT7380 Year of build: 2014 Condition: Used Data: Max. working height: 9,20 m Max. platform height: 7,20 m Drive type: Battery Platform dimensions LxW: 1,62 x 0,78 m Transport dimensions LxWxH: 1,90 x 0,79 x 1,76 m Lifting capacity: 200 kg Own weight: 1.750 kg Special features: white tires, anchor points for fall protection systems (PPE) available.

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Fsdpfx Aoywi Dasikepp

Condition: excellent (used), lifting height: 3,650 mm, fuel type: electric, General information Year of manufacture: 2026 Weights Empty weight: 913 kg Functional Fpsdpsyvvaljfx Aikjp Lifting capacity: 225 kg Working height: 565 cm Dimensions of cargo space: 137 x 77 x 188 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: CA Additional information Please contact Christian Theißen for more information Manufacturer: Skyjack Model: SJ12 E Year of build: 2026 Condition: New Data: Max. working height: 5,65 m Movable up to working height: 5,65 m Platform height: 3,65 m Lifting capacity: 225 kg Platform dimensions LxW: 0,99 x 0,76 m Transport dimensions LxWxH: 1,37 x 0,77 x 1,88 m Max. Ground pressure: 0,1 kg/cm² Tyres: white tires Drive type: Battery Gradeability: 25 % Empty weight: 913 kg Special features: Anchor points for fall protection systems (PPE) EN795, craneable, Area of use for indoor and outdoor. Location: 41468 Neuss immediately available

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Fedpfx Aieyxp Nxokepp Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: used, This listing is for a 1 of 2 Charles Austin Capex 8C Diaphram Pump. The unit is in full working condition and is ready for immediate release. The Charles Austin Capex 8C is a highly efficient diaphragm pump designed to deliver a clean, oil-free vacuum and pressure source tailored for laboratory benchtop use. With its durable alloy casing and advanced engineering, the Capex 8C sets a new standard in versatile laboratory vacuum and pressure solutions. Features: - Oil-Free Operation: Ensures a clean environment, making it suitable for sensitive applications like microbiology and IVF treatments. - Quiet Running: Designed for low noise levels, ideal for use in laboratories without disrupting ongoing work. - Compliant with IEC 1010: Meets electrical safety standards, ensuring safe operation in laboratory settings. - Versatile Applications: Perfect for vacuum and pressure-assisted filtration, residue analysis, gas monitoring, and evacuating rotary evaporators or desiccators. - Lightweight Design: Easy to transport and reposition, enhancing usability across different workstations in a lab. Key Specifications: - Maximum Flow Rate: 8 L/min - Vacuum Level: 240 mbar (excellent for sensitive applications) - Pressure Capability: 200 kPa - Motor Type: Shaded pole motor for quiet and efficient operation Fsdpfxsxxx U Ij Aikjpp - Dimensions: 282 mm (W) x 214 mm (D) x 137 mm (H) - Weight: 3.75 kg (lightweight and portable) Multipurpose Applications: - Microbiology Experiments: Ideal for creating a sterile environment during sample handling. - Embalming Procedures: Provides reliable pressure and vacuum for fluid transfer. - IVF Treatment: Ensures a clean, controlled environment for sensitive biological processes. - Waterjet Pump Replacement: A reliable alternative for general laboratory duties. - Aspiration and Filtration: Effective for removing particles and contaminants from samples. - Beauty Therapy: Used for vacuum treatments in cosmetic procedures.

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Unit Weight: 200 lbs (91 kg) Fjdpfexxygxjx Aikepp Interior Metal: 300 Series Stainless Steel Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Temperature Uniformity (Midrange): ±0.25 °C Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE

Condition: used, mileage: 53,050 km, power: 103 kW (140.04 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,770 mm, loading space height: 1,650 mm, Equipment: ABS, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Internal Vehicle No.: 6243X ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing & trade-in options. Complete vehicle range available on autonext – Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Volkswagen New brake pads front and rear All-wheel drive "4MOTION" Number of seats: 5 Trailer hitch, increased towing capacity 3,000 kg Rear view camera Auxiliary heating Audio system Composition Audio (radio, SD card interface, MP3 playback function) Reinforced suspension and damping Exterior mirrors, electrically adjustable and heated ---- Special equipment: * Storage Package 2 * Storage compartments: 2 DIN compartment in the front under the headliner * Interior lights in the driver's cab: Reading light in the front * Trailer hitch: fixed ball head * Trailer stabilization program * Audio system Composition Audio (radio, SD card interface, MP3 playback function) Fsdpoylf I Aefx Aikspp * Mobile phone interface Bluetooth * Spare wheel in driving condition including onboard tools and jack * Onboard tools and jack * Mud flaps front and rear * Mud flap front * Mud flap rear * Exterior mirrors, electrically adjustable and heated * Chassis: Reinforced suspension and damping * Folding remote control key (2) * Marker lights on the sides * Seat cover / upholstery: imitation leather * Rear step, right side * Warning marking film on the outside * Auxiliary heater (hot water) with auxiliary heating function and remote control Standard equipment: Airbag driver's side, Anti-lock Braking System (ABS), Drive type: all-wheel drive, Exterior mirrors, convex, left, Exterior mirrors, convex, right, Turn signal lights LED integrated in exterior mirrors, Floor covering in the driver's cab: rubber, Underbody panelling for CW value, Double headlights, Grab handle on rear pillar, left, Grab handle on rear pillar, right, Electronic Stability Program (ESP), Driving assistance system: Hill-start assist, Driving assistance system: Side wind assist, Window in loading/passenger compartment: - fixed, front left, Window in loading/passenger compartment: - fixed, front right, Power windows front, Windshield laminated glass, Vehicle without partition between driver's cab and loading space, Gearbox 6-speed, Grab handles A-pillars, Rear wing doors without glazing, Interior lights in the driver's cab: LED, Body/structure: panel van double cab standard, Body version: normal roof, Child lock in loading/passenger compartment, Fuel tank: 75 liters, Radiator grille with chrome trim on top, Partition behind 2nd row of seats, Steering column (steering wheel) adjustable, Headlight range control, Truck registration, Engine 2.0 liters - 103 kW TDI, Multi-function display Plus, Fog light, Plus, Wheelbase 3640 mm, Tire repair kit, Diesel particulate filter, Low emission according to emission standard Euro 6d-TEMP, Sliding door, right with intermediate locking for opening limitation, SCR system (AdBlue technology), Power steering electro-mechanical, Seats in the driver's cab: passenger seat adjustable, Seats in the driver's cab: driver's seat adjustable, Seats in the loading/passenger compartment: 1st row, 3-seater bench, Start/stop system engine, Sockets (12V connection) in the driver's cab (2 pieces), Fr

Condition: used, mileage: 80,000 km, power: 103 kW (140.04 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, Equipment: ABS, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 6616DX ----Why autonext? Over 400 cars & commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Entire vehicle range available on autonext – Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Full and complete service history exclusively with Volkswagen New brake pads front and rear All-wheel drive "4MOTION" Number of seats: 5 Trailer hitch, increased trailer load 3,000 kg Rear view camera Auxiliary heater Audio system Composition Audio (radio, SD card interface, MP3 playback function) Suspension and dampers reinforced Exterior mirrors, electrically adjustable and heated ---- Special equipment: * Storage package 2 * Storage compartments: 2 DIN compartment in front under the headliner * Interior lights in the driver's cab: reading light in front * Trailer hitch: fixed ball head * Trailer stabilization program * Audio system Composition Audio (radio, SD card interface, MP3 playback function) * Mobile phone interface Bluetooth * Spare wheel in roadworthy condition including onboard tools and jack * Onboard tools and jack * Mud flaps front and rear * Mud flap front * Mud flap rear * Exterior mirrors, electrically adjustable and heated * Chassis: suspension and dampers reinforced * Remote control (2) folding * Marker lights on the side Fsdpfx Ajymvpaoikjpp * Seat cover / upholstery: artificial leather * Rear step on the right * Warning marking film on the outside * Auxiliary heater (hot water) with parking heater function and remote control Standard equipment: Airbag driver side, Anti-lock braking system (ABS), Drive type: all-wheel drive, Exterior mirrors, convex, left, Exterior mirrors, convex, right, Turn signal lights LED integrated into exterior mirrors, Floor covering in the driver's cab: rubber, Underbody paneling with Cd value, Double headlights, Entry handle on rear pillar left, Entry handle on rear pillar right, Electronic stability program (ESP), Driving assistance system: hill start assist, Driving assistance system: side wind assist, Window in the cargo/passenger compartment: - fixed, front left, Window in the cargo/passenger compartment: - fixed, front right, Window lift electric front, Windshield laminated glass, Vehicle without cargo compartment partition, Transmission 6-speed, Grab handles A-pillars, Rear wing doors without glazing, Interior lights in the driver's cab: LED, Body/structure: van double cab standard, Body variant: normal roof, Child lock in the cargo/passenger compartment, Fuel tank: 75 liters, Radiator grille with chrome strip on top, Cargo compartment partition behind 2nd row of seats, Steering column (steering wheel) adjustable, Headlamp range adjustment, Truck registration, Engine 2.0 liters - 103 kW TDI, Multifunction display Plus, Rear fog light, Plus, Wheelbase 3640 mm, Tire repair kit, Diesel particulate filter, Low emissions according to emissions standard Euro 6d-TEMP, Sliding door right with intermediate locking for opening limitation, SCR system (AdBlue technology), Power steering electro-mechanical, Seats in the driver's cab: passenger seat adjustable, Seats in the driver's cab: driver's seat adjustable, Seats in the cargo/passenger compartment: 1st row, 3-seater bench, Start/stop system, Sockets (12V connection) in the driver's cab (2

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Fedpeyr Aiwofx Aikspp Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: good (used), lifting height: 197,000 mm, General information Year of manufacture: 2015 Weights Empty weight: 11.990 kg Functional Lifting capacity: 750 kg Working height: 217.000 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 4,84x2,45 Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: Combistar B-195DL25 Year of build: 2015 Condition: Used Data: Max. working height: 21,70 m Platform height: 19,70 m Lifting capacity: 750 kg Lifting capacity on extension: 750 kg Fpjdpfx Aisx Sdwkokop Platform dimensions LxW: 4,38 x 2,20 m Platform lenght pushed out: 6,88 m Transport dimensions LxW: 4,84 x 2,45 m Height transport position with/without railing: 3,64 / 2,81 m Movable up to working height: 21,70 m Ground clearance: 0,19 m Only indoor using: no Drive type: Diesel Own weight: 11.990 kg Special features: White tires, all-wheel-drive, swing axle, soot filter, generator, anchor points for Personal Fall Protection Equipment (PFPE).

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Fpjdpfxey Hlvwj Aikep Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Year of construction: 2008, condition: used, Tray Sealing Machine – MULTIVAC T200 Manufacturer: MULTIVAC Model: T200 Machine type: Semi-automatic tray sealing machine Description The MULTIVAC T200 is a compact semi-automatic tray sealer designed for professional food packaging applications. The machine seals pre-formed trays with film, providing secure and hygienic packaging for a wide range of food products. The T200 is known for its reliability, simple operation, and compact design, making it ideal for small to medium production environments. Technical Specifications - Manufacturer: MULTIVAC - Model: T200 - Machine type: Semi-automatic tray sealer - Packaging type: Pre-formed trays with sealing film - Operation: Manual loading with automatic sealing cycle - Construction: Stainless steel hygienic design - Control: Digital control panel Key Features - Compact tabletop tray sealing machine - Suitable for various tray sizes (tooling dependent) - Easy to operate and maintain - Hygienic stainless steel construction - Ideal for small and medium production runs Applications - Ready meal packaging - Meat, poultry, and fish packaging - Cheese and dairy products - Fresh food and convenience products Condition Fjdpfxoyt I Hds Aikopp Used More photos and full specifications: / Manufacturer: MULTIVAC Model: T200

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 09/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,726 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbocharged diesel engine, 2.0 l / 130 kW (4V) * Start-stop system with brake energy regeneration * One towing eye at the front * Trailer hitch, fixed * Standard wheelbase 3,640 mm * Mud flaps at the front and rear * Fuel tank 75 l * Reinforced suspension/damping and reinforced stabilization * Approved as a 3.5t vehicle Fpedjxyntiepfx Aikjp * Reinforced front axle * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, low rolling resistance tires, tire brand not specified * All-season tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and CAN gateway with ABH programming * 'Climatic' air conditioning in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist lights * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights * Heated windshield washer nozzles at the front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Exterior mirrors, electrically adjustable and heated * Convex exterior mirrors on the left and right, with integrated LED turn signal and wide-angle view * Normal roof * Rear step, covering half the width * Grab handles on the rear pillars * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Radiator protection grille, black with chrome strip * Rear wing doors with increased opening angle * Windshield wiper interval control with light and rain sensor * Sliding door, right * Side window in the passenger/cargo compartment, front left, fixed * Side window in the passenger/cargo compartment, front right, fixed * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and pivotable to the side * Electronic parking brake * Premium interior noise damping * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Seatbelt warning system, E-contact in the seatbelt buckle * 2 radio remote controls * Keyless Go * Water auxiliary heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Seat 'Comfort' right * Seat covers in synthetic leather 'Mesh' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB Type-C data and charging port(s) with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system front and rear * Cruise con

Condition: ready for operation (used), Key Specifications – MBP 14‑Head C2T Series: MBP C2 (stainless steel, central-feed, food-grade) Number of Weigh Heads: 14 Weigh Height/Capacity: Up to 5,000 g per weighment Operating Speed: Up to ~180 weighments per minute Bucket Type: Smooth stainless-steel buckets – ideal for reducing product stickiness Drive & Controls: Stainless-steel construction for all product contact parts Step-motor‑controlled bucket gates ensure precise portion release Windows‑based multimedia control system with remote access/diagnostics Fedjwqq Nkjpfx Aikepp Electrical Requirements: 230 V, 1‑phase, 60 Hz, 10 A Multivac R530 🔧 Key Specifications • Machine Dimensions: o Length: Approximately 6,600 mm to 8,500 mm, depending on configuration o Width: Approximately 1,050 mm to 1,200 mm o Height: Approximately 1,900 mm to 2,000 mm o Weight: Approximately 2,500 kg to 3,175 kg • Film Specifications: o Lower Film Width: Typically ranges from 420 mm to 528 mm o Upper Film Width: Typically ranges from 415 mm to 510 mm o Film Thickness: 50 to 500 microns, depending on material o Advance (Pitch): Commonly between 228 mm to 320 mm • Forming Area: o Length: Up to 521 mm o Width: Up to 400 mm o Depth: Up to 145 mm • Performance: o Cycles per Minute: Typically between 7 to 20, depending on application and configuration • Utilities: o Voltage: 400V, 3-phase, 50 Hz o Power Consumption: Approximately 19 kW o Compressed Air Requirement: 7 to 10 bar o Water Connection: 1.5 to 4.5 bar

Condition: used, This listing is for a Hulme Martin 10/3319 Heat Sealer The unit is in full working condition and is ready for immediate release. Fpjdpfexuiv Ijx Aikjp This is an mpulse heat sealers (for like-for-like thermoplastic film welding), constant heat sealers (for laminated or foil materials), vacuum sealers and other ancillary equipment. Designed for durability (20+ years or more in service according to their marketing) and easy servicing via plug-in heater bars and affordable consumables.

Year of construction: 2014, condition: used, This listing is for a Full Mueller PyroPure WFI System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This system is in immaculate condition as the sites steam requirements were “Turned on Time”of the Steam Generator's is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The Mueller PyroPure WFI System stands out as a high-performance, integrated solution for the pharmaceutical and biotechnology industries, focusing on the production, storage, and distribution of ultra-high-purity Water for Injection (WFI). Below is an in-depth look at its components, capabilities, and specifications. Key Components 2x Mueller P7310 Pure Steam Generator High Capacity: Generates from 0 to 700 kg/hr of pure steam, suitable for high-volume operations. Operational Flexibility: Can operate alternately with another unit of the same model, maximizing efficiency and reducing downtime. Regulatory Compliance: Meets USP WFI standards, ensuring suitability for pharmaceutical applications. Maintenance-Friendly Design: Features an external evaporator for easy access and servicing, minimizing contamination risks. Advanced Control: Equipped with an Allen Bradley Compact Logix PLC and an intuitive operator interface terminal (OIT) for real-time monitoring and control. Safety Mechanisms: Includes pressure relief valves and temperature controls to ensure safe operation. Energy Efficiency: Designed to optimize energy consumption, especially when alternating operations between units. Fpjdpoxv Af Esfx Aikep Durable Construction: Made from high-quality stainless steel for longevity and hygienic conditions. 1x Mueller P4003 Pure Steam Condensing System Condition: This unit is in full working condition and ready for immediate release. Installed new in 2015 by Freestead Process Technology. Capacity: Produces 100 gallons per hour (379 litres per hour) of WFI-quality distillate, with a pure steam inlet capacity of 807 lb/hr (366 kg/hr). Compliance: Meets stringent USP WFI standards, is CE marked, and FDA compliant with 3.1B material certification. Core Features: Utilizes a tangential nozzle design for superior impurity separation. Drainable components to minimize contamination risks, with electro-polished 316/316L stainless steel ensuring hygienic operation. Easy maintenance due to a removable tube bundle in the condenser and minimal instrumentation, requiring just 24 inches of clearance for service. 1x Ormandy Newade WFI Storage Vessel Condition: This 2000L WFI storage vessel is also in full working condition, installed in 2015 by Freestead Process Technology. Capacity: Perfectly balances storage efficiency for mid-sized operations with its 2000 litres capacity. Design Flexibility: Available in both horizontal and vertical configurations, customisable based on specific facility layouts. Material Excellence: Made from high-grade austenitic and Duplex stainless steel, ensuring durability and resistance to corrosion. Compliance: Adheres to key industry standards such as PD5500, ASME VIII, and EN 13445, and is CE marked under the Pressure Equipment Directive. 1x Fristam FPE742/185A Centrifugal Pump Condition: This robust 5.5KW sanitary pump is operational and ready for immediate use, also installed in 2015 by Freestead Process Technology. Hygienic Design: Features close internal clearances (as ...

Condition: used, mileage: 290,457 km, power: 355 kW (482.67 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, soot filter, Vehicle number: 253284 1st owner, accident-free, full service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system INTERIOR * Auxiliary air conditioning TECHNOLOGY & SAFETY * Central locking system OTHER EQUIPMENT * ZF Intarder Further features * XG driver’s cab * Adaptive cruise control with FCW and AEBS-3 * Emission standard Euro 6 Fpsdowz T T Hepfx Aikop * Automated gearbox, TraXon, 12-speed * DAF Connect * LED headlights and fog lights * Windscreen with sun protection film * Laminated glass with sun protection film * DAF Digital Vision System * DAF Corner View * Adjustable roof spoiler for XG cab * Extended side skirts * Driver’s seat: Super Air * Refrigerator and drawer * Preparation for air pressure device * Luxury LED interior lighting * Automatic cab climate control * Accessory power supply: Standard + 2x 40 A * FMS connector, extended and prepared * Digital tachograph, VDO 1C * DAF Infotainment Luxury Plus, luxury speakers * Predictive cruise control * Turn assist * Axle load monitoring * Mechanical differential lock * 2-cylinder compressor without clutch * Wheelbase 4.00 m/rear overhang 0.99 m * Electrical connection for trailer, 24 V/15-pin * Alternator 130 A, batteries 2 x 210 Ah AGM ---- Subject to prior sale and errors excepted. The vehicle description serves only for general identification and does not constitute a warranty in the legal sense. The exact scope of equipment can be obtained from our sales staff. Please contact us.

Condition: used, lifting height: 2,960 mm, fuel type: diesel, color: blue, Equipment: all wheel drive, General information Year of manufacture: 2009 Drivetrain Drive: Wheel Weights Empty weight: 7.083 kg Functional Lifting capacity: 680 kg Working height: 1.520 cm Fedsv Ticpspfx Aikjpp Dimensions of cargo space: 488 x 228 x 218 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: GS4390RT Year of build: 2009 Condition: Used Data: Max. working height: 15,20 m Platform height: 13,20 m Lifting capacity: 680 kg Lifting capacity on extension: 680 kg Platform dimensions LxW: 4,81 x 1,84 m Platform length pushed out: 7,40 m Transport dimensions LxW: 4,88 x 2,28 m Height transport position with/without railing: 2,96 / 2,18 m Movable up to working height: 15,20 m Ground clearance: 0,23 m indoor use only: no Drive type: Diesel Empty weight: 7.083 kg Special features: All-wheel-drive, anchor points for Personal Fall Protection Equipment (PFPE), extendable double deck up to a max of 7.40 m, extandable ground supports.

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Fpjdpfxexl Dxlj Aikjp Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The following three-part packaging line is offered on behalf of the owner, consisting of: Fpedpfx Aisxq Hcqsksp + One semi-automatic L-sealer Sealing frame: 900 x 700 mm Product conveyor belt Film separator sheet Film roll holder for PO and PE films Machine is mobile 230 V, 3 m cable Year of manufacture: 2013, manufacturer unknown + One shrink tunnel Pass-through height: 250 mm Pass-through width: 500 mm Tunnel length (hood): 1,300 mm Rod spacing: 25 mm Three-phase current, 16 A and + One product conveyor belt 1,000 x 400 mm Adjustable side guides Harting connector The machine comes from a demonstration room, has correspondingly few operating hours, and is therefore in very good overall condition. The machine location is Salzgitter. The total price of 4,275 euros is ex works, unpacked, plus VAT. The individual components of the line can also be purchased separately. The individual prices – also ex works, unpacked, plus VAT – are as follows: L-sealer: 1,485 euros Shrink tunnel: 2,250 euros Product conveyor belt: 540 euros