Used Faceplate for sale (623)

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Additional equipment • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock • Chip management: 2× rear-discharge chip conveyors Podsy Uxigjpfx Amnsgl Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Technical details Pgsdsy Tuhcopfx Amnsl turning diameter 815 mm turning length 3000 mm control ECS 2402 swing over bed 815 mm centre distance 3000 mm swing diameter over slide rest 485 mm spindle bore 137 mm spindle turning speed range 1200 U/min rapid traverse 5 m/min spindle motor 28 kW tailstock quill diameter 115 mm tailstock quill stroke 250 mm total power requirement 30 kW weight of the machine ca. 7,0 t dimensions of the machine ca. 5,87 x 2,10 x 2,10 m Additional information Equipment: * CNC-control E.C.S. 2402 * 3-jaw chuck * 4-jaw faceplate, diameter 700 mm * 4-jaw faceplate, diameter 400 mm * 3 Steady rests * Chip Conveyor Without boring bar holder and boring bar.

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm Pgjdpfx Amoy Ty Ihensl max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Pgedpey Tt Tksfx Amnjl Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg Pgsdpfofg Th Asx Amnel

Condition: used, Year of construction: 2026, faceplate diameter 1.600 mm swing diameter 2.000 mm turning height 1.400 mm Control Fanuc max. Torque 23.863 Nm cutting capacity max. 3.000 kgf max. workpiece weight 10.000 kg table diameter 1.600 mm table speeds min power capacity - table 37/45 kW resolution 0,001 ° Pgodpfx Aeyiu N Djmnsl Working speed 0 - 1.200 °/min max. table speed 3,333 1/min Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 15 / 18,5 kW max. Torque 235 Nm ram cross section 220 mm x-axis 1.900 mm z-axis 900 mm cross rail adjustment 700 mm tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 rapid feed (X / Z) 7,5 m/min feed speeds max. 7.500 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 80 kVA weight of the machine ca. 34,0 t dimensions of the machine ca. 7,50 x 6,50 x 5,20 m CNC - Vertical Turret Lathe HANKOOK - VTC 160 E - NEWMACHINE

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm Pgjdpfx Amey S Duvjnsl tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: good (used), Year of construction: 1989, Max. turning Ø:1400mm Table Ø: 1200mm Control: CNC Altstohm Cyber 3000 Length: 2700mm Width: 2400mm Height: 3950mm Pgsdpfxjwvrtue Amnsl Weight: 0kg

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Pgsdpfxeku Aaae Amnjl Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1981, condition: excellent (used), Dorries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany Pedpskwcpxefx Amnogl - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2: 5.100 - Max. turning height : 2.650 - Stroke Tool holder : 1.250 - Crossrailadjustment : 1.500 - Table load : 60.000 - Tool shank size : 40 x 40 - Max. cutting power : 75000 - Max. torque on table : 60000 - Power main motor : 75 kW / 415 - Speeds 1 / 2 / 3 Range: 0,8 – 100 - Feeds Vario : 0,1 – 1.000 - Rapid Feed : 6.000 - Dimensions: 9,30 X 6,10 X 6,30 X 60 - CNC Siemens Sinumriek System 8 - Tool changer 16 positions - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways - Displaceable table hydraulic / manuel - Circular interpolation Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: good (used), Year of construction: 1998, CNC Vertical lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Make: DS Dorries Scharmann Type: VCE 2000 FMC Podpfxowb Ayio Amnsgl Control: SIEMENS 840C Year: 1998

Condition: excellent (used), Year of construction: 2009, turning height: 1,280 mm, total height: 5,600 mm, total width: 3,850 mm, total length: 4,260 mm, rotary table diameter: 1,400 mm, workpiece diameter (max.): 1,600 mm, overall weight: 21,500 kg, CNC Vertical lathe Fremtas - 16FR3 MACH-ID 9467 Make: Fremtas Type: 16FR3 Control: FAGOR 8055 TC Year: 2009 Psdsy Htilopfx Amnsgl Work load 6300 Kg Cross rail adjustment 660 mm Feed rate cross rail 0 - 400 mm/Min Feed rate 0 - 3000 mm/Min Rapid feed 0 - 8000 mm/Min Central lubrication Chip conveyor RAM with Sandvik COROMONT C8 Tooling C8 with double connector Ca 10 units CAPTO Tool system 4 extra heavy duty jaws Max. turning Ø: 1600mm Table Ø: 1400mm Horizontal movement support:1000mm Speeds / ranges: 1 - 200Rpm Power: 75kW Maximum turning height: 1280mm Vertical movement support: 700mm Length: 4260mm Width: 3850mm Height: 5600mm Weight: 21500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,400 mm, Manufacturer: VIPER Type: VTL 20/24 M Control: Fanuc Oi-TD Year of construction: 2008 X Stroke 1835mm Z Stroke 1000mm Table load 20 Ton Ram size 230 x 230 mm Stroke cross rail 800 mm Stroke crossrail in 5 steps each 200 mm Live tools 2000 rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360,000 Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Specifications Metric US standard Max. turning diameter 2400mm Table diameter Ø 2000 mm Tool changer 18 Speed Psdpev R Di Ssfx Amnsgl 200 rpm Power 48 kW Max. turning height 1500 mm C-axis 360,000 ° Dimensions (estimate) Length 9,300 mm Width 6,300 mm Height 6,700 mm Weight 48,000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: new, diameter / mm Cutting (quantity) / weight / kg Pedpfx Amey Suqbensgl taper MK / Set of 3 clamping blocks with T-slots Length: 1000mm Width: 80mm Height: 160mm T-slot size: 32 x 18 T-slot height: 32mm Clamping plate – clamping block – clamping table – clamping arm – T-slot plate

Condition: used, Year of construction: 2009, swing diameter 1400 mm Pjdey S D Tfspfx Amnjgl faceplate diameter 1250 mm Control SIEMENS work height max. 1100 mm table load 6 t total power requirement 80 kW Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN The machine enables additional drilling and milling via an integrated milling unit in the tool change system.

Condition: good (used), Year of construction: 1970, Centre height over bed: 2,100 mm Centre distance: 15,000 mm Faceplate (table) diameter: 3,500 mm Maximum swing diameter over faceplate: 3,120 mm Maximum swing diameter over bed: 4,150 mm Maximum swing diameter over carriage: 3,600 mm Maximum workpiece weight between centres: 180 t Psdpfoy T I Icox Amnegl Bed width across guideways: 4,200 mm Bed height: 900 mm Bed length incl. headstock: 22,400 mm Spindle diameter at front bearing: 700 mm Tailstock quill diameter: 620 mm Faceplate speed range: 0.15 – 40 rpm Balancing device Electrical balancing via generator brake system and compensation weights in the headstock. Maximum balancing values per speed range: I: 7,500 kgm II: 2,850 kgm III: 1,250 kgm IV: 480 kgm The unit can be deactivated during standard turning operations. Crankpin machining group This unit is mounted on the support and enables: Minimum distance between spindle axis and centre of rotary ring: 700 mm Maximum offset for crankpin machining: 1,000 mm Steady rest Workpiece diameter: 500 – 1,000 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D PL ManualTurn turning diameter: 1.140 mm turning lenght: 4.200 mm turning diameter over slide: 800 mm faceplate diameter max.: 1.000 mm Support Length of the bed slide: 1.000 mm Travel of the cross slide: 650 mm Width of the cross slide: 425 mm bed width: 710 mm Main Spindle spindle bore: 120 mm spindle diameter in front bearing: 190 mm Accessories 1 piece fix steady rest 10 pieces Multifix quick-change steel holder Typ D The machine has been general overhauled in 2007. Pedpfx Asy T I H Semnjgl

Condition: used, Technical details: faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 330 mm faceplate turning speed range: 1 - 92 U/min workpiece weight: 18 t feeds: 1 - 4000 mm/min main drive motor: 55 kW total power requirement: 85 kVA weight of the machine ca.: 64 t dimensions of the machine ca.: 90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor * Pgsdpfovb Dq Rox Amnsl

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm Podpfx Asw Rz U Aomnogl max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D *

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm Podpfx Aoxwp Ehomnjgl centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: used, Technical details: table diameter: 4500 mm Podpfx Aou Ix H Djmnsgl faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m NEW CNC vertical turret lathe - manufactured upon official order and deposit. The photos shown are of a newly built machine that we delivered to a customer. (The photos are for illustrative purposes only.) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet Pgedpowtctyjfx Amnjl *

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Pgjdpfsu Tq U Iex Amnsl Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: used, Technical details: faceplate diameter: 785 mm Pgjdpfx Asu Nk Ehjmnel revolution per minute: 4,5 - 180 (Planscheibe) U/min Speed of boring spindles: 4,5 - 900 U/min. tool taper: SK50 weight of the machine ca.: 3,7 t space requirements of the machine approx.: 3,6x1,3x1,6 m spare part for a table type Boring and Milling Machine WMW BFT 130 with with headstock incomplete (as it can be seen on the picture!!) - diameter facing of a flange:0-1400mm - diameter for drilling: max. 800mm - diameter at face turning: 0-1400mm - spindle diameter: 130mm - drilling depth: 1000mm *

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm Pjdpfx Aeu Idtpemnogl revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system Heidenhain for axes X/Y/Z/C-table hydraulics machine feet/footplates control panel with boom *