Used Fabric Cutter for sale (6,480)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, total width: 2,775 mm, total length: 4,640 mm, input voltage: 400 V, input current: 50 A, working width: 1,600 mm, cutting height (max.): 25 mm, compressed air connection: 6 bar, Bullmer TURBOCUT S 2501 CV – Conveyor CNC Controlled Cutter for Multi-Layer Cutting Knife-cutting system including drilling unit from company liquidation. Excellent condition, top specification, and fully operational. The CNC cutter was used for cutting lightweight women’s outerwear. It was not subject to heavy use and was handled with extreme care. The machine was fully operational up until the last day of use (04/2025), and received a complete service shortly before decommissioning. Wear parts, such as the cutting bristles, are in very good condition. Pneumatic hoses and connectors (Festo) were replaced in 11/2024. BY THE WAY: We are a BULLMER service partner and authorized dealer. Manufacturer: BULLMER Spezialmaschinen GmbH & Co. KG, Mehrstetten Condition: USED Assessment: Very good Year of manufacture: 10/2007 FEATURES: Cutting height: up to 25mm (compressed) Working width: 1,600mm Cutting window length: 1,800mm Total length: 4,640mm Total width: 2,775mm Operating system: WinXP Original price: €105,000.00 (net). Further functions: Tilt correction, double cut suppression, and much more. CONNECTIONS: 1. Control cabinet for vacuum pump, bristle and cleaning bath Voltage: 400 V, 50/60 Hz Phases: 3 PH / N / PE Power rating: 2.5 + 15 kVA Main fuse: 50 A 2. Control cabinet for controller / PC Voltage: 400 V, 50/60 Hz Phases: 3 PH / N / PE Power rating: 3 kVA Main fuse: 16 A SITE REQUIREMENTS (RECOMMENDED): Gtodpfxjyh Nluj Afnou Protection: 3 x 50 A slow-blow Cable cross-section: 5 x 10 mm² Complete documentation included in delivery: * Operating instructions * Spare parts lists * Manuals * Circuit diagrams * EC Declaration of Conformity COLLECTION: COLLECTION ONLY in D-32107 Bad Salzuflen – NO SHIPPING! Loading onto trailer/truck is possible indoors in our large facility (dry loading). LOADING: We can assist with loading using our equipment (forklifts, pallet trucks, etc.) at cost. Load securing: Adequate securing materials must be provided by the buyer: anti-slip mats, lashing straps, etc. ADVANTAGE: The cutter has been disassembled for easier transport. Collection is therefore very simple. We collected it ourselves with a single car trailer (loading area 6 x 2.2m). Currently, the cutter is in the described, dismantled and ready-for-collection condition. NOTE REGARDING WARRANTY/LIABILITY: This item comes from a company liquidation. Items from a verified company liquidation can be inspected and function-tested on site as far as possible. Sold as seen/inspected – any warranty or liability is excluded. By taking possession, the buyer agrees to these terms. COMMERCIAL SALE: You will receive a proper invoice with VAT shown. Errors excepted.

Condition: good (used), Year of construction: 2012, Marel I-Cut 10 Portion Cutter The I-Cut 10 PortionCutter is an accurate and reliable portioning machine designed to give immediate results on your bottom line. With only a few touches to the control panel you can move away from inaccurate cutting by hand to accurate portions of boneless meat products – beef, pork and veal – on weight every time. The I-Cut 10 enables you to make substantial savings on labour because of the speed and versatility of the machine. Improvements in yield will furthermore secure a very fast payback on your investment. The design of the machine makes it very easy to clean securing a high hygienic level and the small footprint means it will t into almost any plant layout. Technical data: Belt speed: 0,01 – 0,34 m/sec 10 cuts/s Belt width: 280 mm Belt length (in-feed/out-feed conveyor): 4025/2162 mm Temparature: 0-30 оC Gtsdpfx Ajyf Eqkjfnju Water consumption: 0-2 l/min Voltage of power source: from 3 x 400 V to 3 x 480 V + PE Power consumption: 4 kW Frequency: 50/60 Hz Automatic circuit breakers residual current: Type B, 500 mА Dimensions (L x W x H): 2.700 x 980 x 1.560 mm Weight: approx. 360 kg Year: 2012

Condition: not inspected (used), Micro cutter Infeed 780x580mm Gtedpfx Aef Rku Dsfneu optional tested and adjusted to customer choice.

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, We currently have a 150-ton cutting press with two work tables (see video), featuring the following specifications: Gsdoydnf Ijpfx Afnetu • Working area: 1400 x 900 mm • Cutting force: 150 tons • In-stock machine, available immediately • Installation and training in France provided by our technical service team • 1-year warranty

Condition: good (used), Code: 0541 Brand: CAGLIO Model: TO 3200 Hydraulic veneer guillotine Technical data: Very strong construction Cutting length mm 3200 Cutting height mm 100 Motorized rear register Max cut depth mm 800 Min cut depth mm 25 Pump unit motor Kw 7,5 Gtodpfxoyiufre Afnsu Photocell Overall dimensions with register mounted: mm 4200 x 2100 x 1700 h Overall dimensions with register dismounted : mm 4200 x 1500 x 1700 h Weight kg 4300

Year of construction: 2007, condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone at ...). SIMEX TF 800 Rock Cutter / Milling Attachment / Tunnel Cutter / incl. Liebherr SW48 Adapter Plate / Year of Manufacture: 2007 / In stock & immediately available Price: €14,890.00 net / €17,719.10 gross Drum width: 800 mm Milling speed: 75 - 115 rpm Hydraulic motor power: 61 (83) kW (hp) Required oil flow: 105 - 190 l/min Gtodpfsyix I Dsx Afnsu Required oil pressure: 350 - 200 BAR Max. vertical force: 31.8 kN Operating weight (standard drum): 1,035 kg Recommended excavator weight: 14 - 22 tons Features: - incl. Liebherr SW48 adapter plate We have a wide selection of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a very large selection of various attachments, all available for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. Upon request, we are also happy to provide you with a financing offer. We are official distribution and service partners for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No: 310390 = Further Information = Unladen weight: 1,035 kg Please contact Tobias Ebert for further information.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut Gjdpfxjwrn Iyo Afnjtu For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: good (used), Year of construction: 2010, functionality: fully functional, working range: 3,500 mm, sheet thickness (max.): 250 mm, sheet thickness steel (max.): 250 mm, input voltage: 230 V, cutting speed: 12,000 mm/min, Equipment: documentation/manual, Koike Maxigraph 3500 cutting machine with Burny Phantom control. This machine is suitable for oxy-fuel and plasma cutting. The machine is used but in good condition. Machine can be seen in operation. Year of manufacture: 2010 Please note, this offer includes only: Gtjdpjyc Ecnefx Afnou - Gantry - Control unit - X, Y, and P motors - Lifter and Koike THC height control - Cables and hoses Excluding: - Cutting table - Extractor/filter - Hypertherm 260 plasma source - Warranty For questions, please email us. If you have any questions or require more information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, Walter MINI POWER Loader Fanuc Gedjxnkzfspfx Afnjtu

Condition: used, machine/vehicle number: 19163, Pappschere - Board Cutter Krause blau Godsh Axx Rspfx Afnetu Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 4686, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gedpoh Ax D Sofx Afnetu

Year of construction: 1966, condition: used, machine/vehicle number: 66236, Folienschneider / Foil Cutter BAIER FOLSCHBaujahr / Year 1966 - Serial-No. 66236 Online-Video-Inspection by Skype-Video Godpfxjh Ayb Ee Afnotu We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Blockrückenfräse (Einkerbmaschine) - Block Back Cutter and Notching machine Gtedpfx Ajt Drmnofneu Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Pappschere / Board Cutter Pappschere Karl Krause Hebelschneidemaschine PS 120 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Gtodpfx Afot Drm Ionsu Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Passepartout-Schneidemaschine / passepartout cutter Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Godpfxet Drppo Afnetu Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 24089, Pappschere / Board Cutter Krause PS 120 Serial-No. 24089 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gtsdpfx Afotzc Rlenju

Condition: used, Year of construction: 1966, machine/vehicle number: 155017, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1966 - Serial-No. 155017 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Gtsdpfeh Axiqex Afnsu Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1968, machine/vehicle number: 32236, Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBBYear 1968 - Serial-No. 32236 Size max.: 570 x 820mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video Gtsdpfx Afsnnyg Ionou We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1963, machine/vehicle number: 142, Letter Press Tiegel - DIE CutterSize min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Godpfsmi U Nmjx Afnstu Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmComplete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1957, machine/vehicle number: 120523, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1957 - Serial-No. 120523N Size min.: 40 x 70mm - max. 260 x 380mm Gtjdpfxjh Ayhro Afnsu Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030Serial-No. WLNS Gtsdpfsh Axtlox Afnju Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 50279, Registerstanze - Index Cutter Hunkeler RE 320Serial-No. 50279/19 Cutting length max. 320mm Cutting deep max. 80mm Cutting thickness max. 10mm Gsdpfxoh Axvgj Afnjtu Book thickness max. 50mm Knife speed 70stroke/min. Motor - brake motor 1,5 PS Machine Dimensions: Length 950mm Deep 820mm High 1370mm Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1960, machine/vehicle number: 16945, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBGYear 1960 - Serial-No. 16945 Size min.: 210 x 280mm Size max.: 560 x 7700mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.0800kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video Gtjdsrttuhopfx Afnju We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 7160, Rotary Board Creaser STRÖBEL KS 110-0-1Serial-No. 188-1501 Working width 1100mm Smallest Sheet length 150mm Rill-Ritzwellen Ø 78mm Power 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Gtodpfx Ajqgkffefnou Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1968, Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBDYear 1968 Size min. 290 x 400mm Size max. 640 x 890mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Gtodpfx Aferkqi Uensu On Stock Emskirchen / Nürnberg - Can be test