Used Ess Ecomag 304 for sale (11,772)

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34 Klodsy H Dzfopfx Amrsu

Condition: excellent (used), Year of construction: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are placed on the components of the drive system. Klodpfx Aegtty Tjmrou Higher power transmission, higher torques, and a smaller overall size are the challenges. This development has led to an increased need for cold-formed splines. With the vertical spline press (VSP), Sack & Kiesselbach provides customers with a solution that offers technological and logistical advantages compared to conventional technologies (such as rolling or broaching). The relatively small and very user-friendly press can be configured for both manual and automated operation. In addition to the spline press, the customer can also obtain the appropriate tooling system and the corresponding process technology from a single source. 1 used vertical spline press Manufacturer: Sack & Kiesselbach Type: VSP 50/30 Year of manufacture: 2015 Technical data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between columns: 530 mm Spline cylinder speed: 3-9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special equipment: Digital position measuring system Spline tool for internal gearing

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Klsdswxw Amopfx Amrju Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 Kljdpfxjul U Sve Amreu serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: Kljdpfx Aowxw H Ejmrsu SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: good (used), Forging equipment/power hammer from a vocational training center Siegfried Volz Machine Tools Kledpfx Amjzbiqtsreu Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1993, Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, Double miter saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: swivels 45° -Saw blade: Ø 500 mm Klodpstxkprofx Amrsu -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine Kodpjdx R Tfjfx Amrolu - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Kljdpfsxgvwpox Amrju Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Kedpfoy Ehrxox Amrjlu Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale Klodpfx Ajwdny Temrsu

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Ksdpfx Amoxgbxfjrelu Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Condition: good (used), We are offering for sale a used shelf connector for double rows of shelving, manufactured by Link 51. The shelf connectors are designed for a shelf spacing of approximately 400 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: Klsdpfsd Tyizsx Amrju 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double rows of shelving Material color: anthracite Overall length: approx. 515 mm Shelf spacing: approx. 400 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.321 kg/piece 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 80|53 x 45|25 mm Crossbeam type: 4 BST Step profile: H 28 mm, W 20 mm Clips: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of crossbeams: 900 kg, with evenly distributed load Kljdpfx Amokv Urwjrou 02x Securing pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Further information on the pallet racking crossbeam: Crossbeam type 4 BST is used to insert chipboard, steel panels, or similar materials, which then end up approximately flush with the top edge of the racking crossbeams. This prevents any height loss; furthermore, the front of the step crossbeam protects the floors or the insertion segments from damage. The crossbeams are not intended for pallet storage, but rather as picking levels; i.e., for storing boxes, small parts, or similar items.

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm Here we offer a used workbench from the manufacturer Jung Heinrich for sale. The scope of delivery includes: 02x Workbench stands, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x Workbench crossbeams, used Material color: orange Box profile: 85 x 40 mm Crossbeam type: GN85x41mm Clear width: 2,775 mm 08x Locking pins, used Design: fully galvanized 01x Chipboard, second choice, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 01x Chipboard, second choice, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x Drilling screws, new Ksdpfx Ashm Stzemrjlu Design: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Here, we offer a used shelf connector for double rows of shelving from the manufacturer Link 51 for sale. The shelf connectors are designed for a shelf spacing of approximately 300 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double rows of shelving Material color: anthracite Overall length: approx. 415 mm Shelf spacing: approx. 300 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.092 kg/piece Kledpfod Tymdsx Amrsu 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8

Condition: good (used), We are offering you a used shelf connector for double shelf rows from the manufacturer Link 51 for sale. The shelf connectors are designed for a shelf spacing of approximately 650 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: Klsdpfx Aod Typyomreu 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double shelf rows Material color: anthracite Overall length: approx. 765 mm Shelf spacing: approx. 650 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.878 kg/piece 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8

Condition: good (used), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Clip: 3 HK (hook) Clear width: 2,700 mm Max. load per beam pair: 900 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Additional information about the pallet racking beam: Beam type 4 BST is used to insert chipboard, steel panels, etc., which then end up approximately flush with the top edge of the racking beams. This avoids any height loss. Furthermore, the front of the step beam protects the floors or the insertion segments from damage. Kledpfx Amokvnm Aorsu The beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, etc.

Condition: new, The scope of delivery includes: 01x ceiling mirror, second choice (new) Outer diameter: 800 mm Total height: approx. 300 mm Material: plastic Incl. fastening chain: approx. 5,000 mm Weight per piece: approx. 2.10 kg Note: This is a second choice product, new, unused. Second choice means there may be dust deposits, minimal scratches or dirt. Your contact person in our company: Mr: Andre Evering Kledpfx Aou Dwyhsmrou Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Technical data for the base plate: Manufacturer: Link 51 Type: Boltless XL suitable for frame profile: M,H,E and S Included in delivery: 01x base plate, new Material color: sendzimir galvanized Material thickness: 4 mm Total width: 96 mm Total depth: 137 mm Number of drill holes: 3 pcs. Drill hole Ø: 14 mm Weight: approx. 0.480 kg | pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Klodporg D Awsfx Amrou General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 02x Shelf uprights, used Material color: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Shelf crossbeams, used Material color: orange Beam profile: 120 x 50 mm Clear span: 2,700 mm 08x Locking pins, used Design: fully galvanized 03x Wire mesh grating, new Material color: Sendzimir galvanized Design: laid-on shelf grating, beveled on both sides Depth: (direction of supporting bar) approx. 1,125 mm for upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Crossbeam support: approx. 65 mm Mesh size: approx. 95 x 45 mm Wire thickness: approx. 4.5 mm Maximum load capacity: up to 800 kg with evenly distributed load 03x Trapezoidal sheet metal, 2nd choice Exterior color: RAL 8012 reddish brown Interior color: similar grey-white Sheet length: 1,500 mm Sheet width: 1,075 mm Cover width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material color: RAL 8012 reddish brown Size: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm with 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws, 4.8 x 20 mm galvanized, self-tapping for wooden substructure Technical data for the firewood storage: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images are example images Kedpfx Amjdvgxiorolu to illustrate the construction. The material color of the shown uprights and crossbeams may differ. General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow type of truss: B120ZC box profile: 120x50 mm agraffe: 3 hooks clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, new execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Kljdslwuw Uepfx Amrou This item is offered for pickup only. A desired beyond that Transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Material color: blue Manufacturer: Feralco for shelf spacing: approx. 200 mm Overall length: approx. 200 mm Profile dimensions: approx. 20 x 20 mm Headplate: approx. 100 x 40 x 4 mm Borehole diameter: approx. 9 mm (2 pieces per side) Kljdpfx Amok Iuhfsreu Weight: approx. 0.41 kg | piece

Condition: good (used), The scope of delivery includes: 1x chipboard, used Ksdpfxeitab So Amrjlu Dimensions: approx. 2,680 x 1,045 mm (W x D) Chipboard thickness: 38 mm Note: The chipboards are used and may have minor damage. These chipboards were previously installed in an SSI Schäfer Type PR 600 shelving unit, with a frame depth of 1,050 mm.

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We are offering a used workbench from the manufacturer Jung Heinrich for sale. The scope of delivery includes: 02x Workbench frames, used Material color: blue Frame profile: 76.2 - 100 mm Frame height: 900 mm Frame depth: 800 mm Incl. cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 04x Workbench crossbars, used Material color: orange Kledpfxohm Stls Amrou Box profile: 85 x 40 mm Crossbar type: GN85x41mm Clear width: 2,775 mm 08x Locking pins, used Design: fully galvanized 01x Chipboard, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 01x Chipboard, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 16x Drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied unassembled; - The workbench frames are pre-assembled; - The production time is usually approx. 3 - 5 working days.