Used Esab Lan 400 for sale (52)

Condition: used, TIG welding rod, welding wire Fpedpjcbdyzofx Afnoc Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package

Condition: used, Plasma hose package, welding torch, MIG/MAG torch -ESAB type: PSF 410 Cw -Hose package: water-cooled -Spring contact -Length: 3.25 m -Price: per piece -Number: 2 pieces Fjdjd S Eqfopfx Afnopc -Weight: 3.2 kg

Condition: ready for operation (used), self aligning set of welding rotators one driven unit one non-driven unit max load capacity: 300 ton max rolling capacity: 450 ton speed range: 60 1200 mm/min min diameter of workpiece: 1000 mm max diameter of workpiece: 7800 mm spare wheels included Max weight on both supports: 450 ton Fpsdpfxjx Enhys Afnoc Number of wheels: 24 wheels Dia x width wheels: dia 580 x 140 mm Coating material on wheels: steel

Condition: used, Technical details: welding current: 500 A Length: 1000 mm height: 1350 mm welding current - continuous: 50-500 A weight of the machine approx.: 282 kg dimensions L x W x H: 1,0 x0,6 x1,35 m MIG-MAG welding machine Switchover 2/4-cycle, stepless, welding current display Fedev Rbdtopfx Afnjpc Water-cooled and frost protection Shielding gas solenoid valve Small hose package Torch head Wire feed 4-roller drive for wire Ø 0.8/1.0/1.2mm Earth CABLE PLEASE ON REQUEST! *

Condition: excellent (used), I sell Esab LTG150 welding machine in very good condition. Fsdpfeu Sun Eox Afnspc

Condition: good (used), Year of construction: 2002, functionality: unexamined, SAW Welding System (Submerged Arc Welding/SAW) with Process Controller A2–A6 and ESAB LAF 635 DC Year of manufacture: 2000 Condition: good, operational (from educational institution) For sale is a powerful submerged arc welding system (SAW) consisting of an ESAB DC power source LAF 635 and A2–A6 Process Controller (depending on version, PEH/PEK system). The system originates from an educational institution and was primarily used for training purposes – typically well maintained and regularly inspected. Ideal for automated/mechanized submerged arc welding, e.g., in steel construction, tank manufacturing, pipe/profile fabrication, cladding (depending on welding head/tractor/gantry – if available). Technical Data – ESAB LAF 635 DC (Power Source) Type: remotely controllable 3-phase DC welding power source for SAW and mechanized MIG/MAG Mains connection: 400/415 V, 3~ 50 Hz (alternatively 440 V, 3~ 60 Hz) Duty cycle: 630 A / 44 V at 100% Adjustment range: 75 A / 18 V up to 800 A / 44 V (46 V) Open-circuit voltage: 54 V Idle power consumption: 150 W Efficiency: 0.84 Power factor (cos φ): 0.90 Protection class: IP23 Weight: approx. 260 kg Dimensions (L × W × H): 652 × 483 × 800 mm (or 652 × 483 × 916 mm incl. base) Fusing/Mains data (reference value as per manual): e.g., 63 A slow-blow, supply line 4 × 16 mm², mains current at 100% load 52 A (at 400/415/440 V) Technical Data – A2–A6 Process Controller (PEH / A2–A6) The A2–A6 Process Controller is used for process control/regulation of the mechanized welding system and is designed for SAW welding. Rated voltage (supplied via power source): 42 V AC, 50/60 Hz Rated power: max. 900 VA Motor connections: for ESAB A2 or A6 motors Motor current: 5 A continuous, max. 10 A Wire feed control: internal EMF control or with AC tachometer (6 pulses/rev) Condition & Origin Good, well-maintained condition (training/educational environment) System is fundamentally designed for industrial use (mechanized SAW / MIG/MAG) Fpedpfx Afox Ru Tgsnoc ESAB LAF 635 DC Power Source A2–A6 Process Controller (operation/control unit)

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Available due to surplus stock. Fpodpfxow Trqgs Afnsc

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 230 V, total width: 2,450 mm, total height: 1,550 mm, total length: 10,000 mm, table height: 800 mm, positioning speed: 20,000 m/min, space requirement length: 10,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: pneumatic, ESAB E-Vent Plasma Cutting System + Hypertherm Powermax 1000 – Year of Manufacture 2006 – Defective / For Hobbyists For sale is an ESAB MXL-P 2000, E-Vent plasma cutting system (year 2006) including a Hypertherm Powermax 1000 plasma source. The machine is defective and is being sold as a non-working unit/parts donor. The Powermax 1000 is present; operational status has not been tested. Key technical data (ESAB E-Vent): * Machine length: approx. 7000 mm * Cutting length: approx. 6000 mm * Machine width: approx. 2450 mm Fpodpfx Asx Ap Tpefnec * Cutting width: approx. 1500 mm * Machine height: approx. 1550 mm * Weight: approx. 1500 kg * Voltage: 230 V / 50 Hz, Power consumption 2 kVA Ideal for: * Refurbishment * Conversion to new control system * Parts procurement (gantry, guides, table, plasma source) No warranty, no returns.

Condition: used, Year of construction: 2019, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24. Year: 2019 Country of origin: Sweden. Size (L x W x H): 1150 x 620 x 1100 mm. Weight: 90 kg. With Esab water cooling unit, TA24 control panel and 4 m. TIG-hose. Fpedpfx Aexzrzgofnsc Machine have been tested and serviced.

Condition: used, Year of construction: 2019, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24. Year: 2019 Country of origin: Sweden. Size (L x W x H): 1150 x 620 x 1100 mm. Weight: 90 kg. Fedpexvq Dcsfx Afnjpc With Esab water cooling unit, TA24 control panel and new Esab Exeor SR 21 4 m. TIG-hose. Machine have been tested and serviced. We have 2 machines of this type in stock.

Condition: used, functionality: fully functional, Amps.: 650 Watercooled: Yes. Wire feeder: Esab Feed 4804 MA24 Control: MA 24. Country of origin: Sweden. With synergic in wire box and 4,5 m. Esab PSF 510 welding hose. Fjdpfx Ajxvqz Uefnspc Machine have been tested and serviced.

Condition: used, Year of construction: 2013, functionality: fully functional, Amps.: 420 Watercooled: Yes. Year: 2013 Country of origin: Sweden. Fpsdpfx Afoxvqzbenoc Size (L x W x H): 650 x 1100 x 1000 mm. Weight: 240 kg. With Esab PSF 315 4 m. welding hoze. Machine have been tested and serviced.

Condition: good (used), Welding current range - 200 A Weight 158 kg Accessories / Special features: - separate feeding device ESAB A 10 with 2-roller wire feeder - incl. hose package, pressure reducer and ground cable Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Fpsdpfefkpgdjx Afnsc

Condition: new, welding current 5 - 160 A connected load frequency 230 V weight 7,9 kg Dimensions (LxWxH) 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage, 1-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Maximum welding current 180 A Nominal apparent power in kVA 8 kVA Energy saving mode 30 W Open circuit voltage 63 V DC MMA - max. load at 20% duty cycle 170 A/26.8 V at 60% duty cycle 97 A/23.9 V at 100% duty cycle 75 A/23.0 V TIG - max. load at 25% duty cycle 180 A/17.2 V at 60% duty cycle 116 A/14.6 V at 100% duty cycle 90 A/13.6 V Current range 10-180 A Operating temperature -10 to +40 °C Housing protection class IP23S Test mark CE Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of delivery: Shoulder strap, 4 m TIG torch type SR-B 26, a wear part set, including tungsten electrode 2.4 mm and 3 m workpiece cable Fpjdsvkiwbjpfx Afnoc with clamp

Condition: new, welding current 10 - 180 A open-circuit voltage V connected load frequency 230 V weight 6,8 kg Dimensions (LxWxH) 403 x 153 x 264 mm Electrode welding machine with accessories: Electrode cable Ground cable 4m Fsdpfevkixfjx Afnepc Shoulder strap

Condition: excellent (used), Esab Fabricator EM 401i Technical Data: Water-cooled MIG/MAG inverter Continuously adjustable with 400 A output Duty cycle: 400 A at 60% 310 A at 100% Digital display on the power source 4-roll wire feeder Faricator Feed 304 Fodpfxjxq N D Ro Afnepc 2-meter intermediate hose package Includes earth cable, pressure regulator, and one spool of wire Weight: 107.5 kg Dimensions approx. 1300x500x1020 mm

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) Fpedpfx Ajd N E Rvefnjc - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: used, TIG and Electric Welding Machine / Inverter ESAB Type LTN 160 TIG Welding Machine for TIG and Electrode Manufacturer No. 405-423-0479 Year of manufacture approx. 2010 TIG Output 160 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Electrode Output 140 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Power supply 230 Volts, 50 Hz, Schuko plug - Continuous power adjustment - 2-stroke and 4-stroke operation - Stick electrode operation - 12-meter TIG hose package with hand torch - Direct current only (DC) - HF ignition Fodpfx Asv Uragjfnjpc - Shielding gas pressure regulator - Mobile trolley with cylinder holder Space requirements L x W x H 800 x 690 x 1120 mm Weight 60 kg Good condition

Condition: ready for operation (used), Has been used for welding round seams on PTO shafts. Can be used for many other round items. Adjustable speed on motor. Can run automatically with signal to welder. Can run 1 lap or continuously. Fodpfx Afshwhnyenjpc Max workpiece length 1600 mm. Can be extended very easily. Transport can be arranged. I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes. I also have welders in different sizes and types.

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical data: -Load capacity 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, - type 6 PTF, BJ. 97 - space requirement approx. B 1100 x H 1300 x T 1600 mm -Weight approx. 300 kg Fodpedd Ilxjfx Afnopc

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: 20404881, Offer 23906 CNC - Flame Cutting Portal for Dismantling Technical data approx.: - CNC flame cutting portal with 4 torches as shown, for dismantling. - 4 x torches with automatic height adjustment - Torches feature tilt adjustment - CNC control unit NCE - Control cabinet - Track gauge approx. 3.5 m - Space requirement approx. 5 x 2.4 m Fodpfxsw Nwuco Afnopc

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm Fjdjv Rbivepfx Afnopc - Faceplate motor-rotatable + swiveling or tilting - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: Fedsrkmaaopfx Afnepc - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2409, Offer 24410 Welding turntable and tilting table - three axes - welding positioner Technical data: Fjdpfx Aeur Icusfnepc - max. load capacity 250 kg - Face plate diameter 400 mm - min. Table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height manually adjustable in 3 steps - Faceplate can be rotated motorized - Faceplate manually swiveling or tilting + height adjustment - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for speed - E- foot switch - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 2002, table width 2000 mm table length 2 x 3000 mm burner heads 2 (3) Control Version 5T gangway length 9000 mm sheet thickness max. 100 mm output 2 KVA weight of the machine ca. 3 t Technical details: CNC portal flame cutting machine Manufacturer: ESAB Type: Suprarex SXE-P 3500 Year of manufacture: 2002 CNC control: Vision T5 (installed in 2014) Working area: 2 cutting tables, each L=3m, W=2m Gantry track width: 3.5m Track length: 9 m Max. sheet thickness that can be cut (autogenous): 100 mm 2 oxyfuel torches 1 plasma torch with ESAB ESP 200 power source Extraction/filter system: Kappa Separator KS2/3 flame cutting table + Mykron Fine dust filter Fsdpfx Aevwgndefnopc