Used Esab Lag 315 for sale (46)

Condition: good (used), Year of construction: 2002, functionality: unexamined, SAW Welding System (Submerged Arc Welding/SAW) with Process Controller A2–A6 and ESAB LAF 635 DC Year of manufacture: 2000 Condition: good, operational (from educational institution) For sale is a powerful submerged arc welding system (SAW) consisting of an ESAB DC power source LAF 635 and A2–A6 Process Controller (depending on version, PEH/PEK system). The system originates from an educational institution and was primarily used for training purposes – typically well maintained and regularly inspected. Ideal for automated/mechanized submerged arc welding, e.g., in steel construction, tank manufacturing, pipe/profile fabrication, cladding (depending on welding head/tractor/gantry – if available). Technical Data – ESAB LAF 635 DC (Power Source) Type: remotely controllable 3-phase DC welding power source for SAW and mechanized MIG/MAG Mains connection: 400/415 V, 3~ 50 Hz (alternatively 440 V, 3~ 60 Hz) Duty cycle: 630 A / 44 V at 100% Adjustment range: 75 A / 18 V up to 800 A / 44 V (46 V) Open-circuit voltage: 54 V Idle power consumption: 150 W Efficiency: 0.84 Power factor (cos φ): 0.90 Protection class: IP23 Weight: approx. 260 kg Dimensions (L × W × H): 652 × 483 × 800 mm (or 652 × 483 × 916 mm incl. base) Fusing/Mains data (reference value as per manual): e.g., 63 A slow-blow, supply line 4 × 16 mm², mains current at 100% load 52 A (at 400/415/440 V) Technical Data – A2–A6 Process Controller (PEH / A2–A6) The A2–A6 Process Controller is used for process control/regulation of the mechanized welding system and is designed for SAW welding. Rated voltage (supplied via power source): 42 V AC, 50/60 Hz Rated power: max. 900 VA Motor connections: for ESAB A2 or A6 motors Motor current: 5 A continuous, max. 10 A Wire feed control: internal EMF control or with AC tachometer (6 pulses/rev) Djdjx Ru Tgopfx Ag Djkk Condition & Origin Good, well-maintained condition (training/educational environment) System is fundamentally designed for industrial use (mechanized SAW / MIG/MAG) ESAB LAF 635 DC Power Source A2–A6 Process Controller (operation/control unit)

Condition: excellent (used), 3-Axis Positioner, 7 Ton Technical Data: - Maximum load capacity: 7,000 kg - Faceplate diameter: 1,100 mm - Speed: 0.03 - 1.0 rpm - Minimum table height in horizontal position: approx. 999 mm, maximum 2,218 mm - Minimum table height in tilted position to center: approx. 818 mm, maximum 1,673 mm - Motorized and tiltable/rotatable faceplate - Infinitely variable rotary motion (electric control) - Forward and reverse rotation Dkodpexxw Rnefx Ag Dsk - Welding current transmission: approx. 1,400 A - Maximum torque: 9,000 Nm - Tilting angle: 135° - Drive: 400 V - Power supply: 3 x 400 V - Handheld remote controller for rotation direction and tilting - Dimensions (L x W): approx. 2,620 x 1,490 mm - Weight: approx. 3,500 kg

Year of construction: 1999, condition: ready for operation (used), Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible. Dedpfsuui Ecex Ag Djkk

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Dksdpfxow Azu Io Ag Djk

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Dedpfx Aov Dkcfjg Dokk

Condition: excellent (used), I sell Esab LTG150 welding machine in very good condition. Dsdpfou Sun Eox Ag Dokk

Year of construction: 1990, condition: ready for operation (used), With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. Dkodpfeq Ttz Nox Ag Djk

Condition: used, Technical details: welding current: 500 A Length: 1000 mm height: 1350 mm welding current - continuous: 50-500 A weight of the machine approx.: 282 kg dimensions L x W x H: 1,0 x0,6 x1,35 m MIG-MAG welding machine Switchover 2/4-cycle, stepless, welding current display Water-cooled and frost protection Shielding gas solenoid valve Small hose package Dkedpfxov Rbdtj Ag Dek Torch head Wire feed 4-roller drive for wire Ø 0.8/1.0/1.2mm Earth CABLE PLEASE ON REQUEST! *

Condition: used, current intensivity 400 A open-circuit voltage 65-75 V IP protection class IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S Dkodpfx Aed Ih R Njg Dok - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm

Condition: new, welding current 5 - 160 A connected load frequency 230 V weight 7,9 kg Dimensions (LxWxH) 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to Dksdpfx Aovkiwbeg Dek control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage, 1-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Maximum welding current 180 A Nominal apparent power in kVA 8 kVA Energy saving mode 30 W Open circuit voltage 63 V DC MMA - max. load at 20% duty cycle 170 A/26.8 V at 60% duty cycle 97 A/23.9 V at 100% duty cycle 75 A/23.0 V TIG - max. load at 25% duty cycle 180 A/17.2 V at 60% duty cycle 116 A/14.6 V at 100% duty cycle 90 A/13.6 V Current range 10-180 A Operating temperature -10 to +40 °C Housing protection class IP23S Test mark CE Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of delivery: Shoulder strap, 4 m TIG torch type SR-B 26, a wear part set, including tungsten electrode 2.4 mm and 3 m workpiece cable with clamp

Condition: new, welding current 10 - 180 A open-circuit voltage V connected load frequency 230 V weight 6,8 kg Dimensions (LxWxH) 403 x 153 x 264 mm Electrode welding machine with accessories: Dodpfx Agsvkixfo Dokk Electrode cable Ground cable 4m Shoulder strap

Condition: ready for operation (used), Has been used for welding round seams on PTO shafts. Can be used for many other round items. Adjustable speed on motor. Can run automatically with signal to welder. Can run 1 lap or continuously. Dsdpshwhnyofx Ag Dekk Max workpiece length 1600 mm. Can be extended very easily. Transport can be arranged. I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes. I also have welders in different sizes and types.

Condition: used, From company closure: Esab LAW 400 The unit has been function tested! 350 amperes output at 60% duty cycle Welding range 30–350 amperes 4-roll wire feed Water cooling 2/4 stroke Torch 4 meters + wire + ground cable Without pressure regulator-- Dimensions in mm approx. 1400x630x1020 Dksdpfjxq Rdfex Ag Dok

Condition: excellent (used), Esab Fabricator EM 401i Technical Data: Water-cooled MIG/MAG inverter Continuously adjustable with 400 A output Duty cycle: 400 A at 60% 310 A at 100% Digital display on the power source Dedpsxq N D Rjfx Ag Dskk 4-roll wire feeder Faricator Feed 304 2-meter intermediate hose package Includes earth cable, pressure regulator, and one spool of wire Weight: 107.5 kg Dimensions approx. 1300x500x1020 mm

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical data: -Load capacity 200 kg Dkodpfsdd Ilxox Ag Djk -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, - type 6 PTF, BJ. 97 - space requirement approx. B 1100 x H 1300 x T 1600 mm -Weight approx. 300 kg

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: 20404881, Offer 23906 CNC - Flame Cutting Portal for Dismantling Technical data approx.: - CNC flame cutting portal with 4 torches as shown, for dismantling. - 4 x torches with automatic height adjustment - Torches feature tilt adjustment - CNC control unit NCE - Control cabinet - Track gauge approx. 3.5 m - Space requirement approx. 5 x 2.4 m Dkedpfx Ajw Nwucjg Dsk

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Dodpferkmaaox Ag Dskk Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2409, Offer 24410 Welding turntable and tilting table - three axes - welding positioner Technical data: Dkedpfxeur Icue Ag Dok - max. load capacity 250 kg - Face plate diameter 400 mm - min. Table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height manually adjustable in 3 steps - Faceplate can be rotated motorized - Faceplate manually swiveling or tilting + height adjustment - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for speed - E- foot switch - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 2002, table width 2000 mm table length 2 x 3000 mm burner heads 2 (3) Control Version 5T Djdpfx Agsvwgnde Djkk gangway length 9000 mm sheet thickness max. 100 mm output 2 KVA weight of the machine ca. 3 t Technical details: CNC portal flame cutting machine Manufacturer: ESAB Type: Suprarex SXE-P 3500 Year of manufacture: 2002 CNC control: Vision T5 (installed in 2014) Working area: 2 cutting tables, each L=3m, W=2m Gantry track width: 3.5m Track length: 9 m Max. sheet thickness that can be cut (autogenous): 100 mm 2 oxyfuel torches 1 plasma torch with ESAB ESP 200 power source Extraction/filter system: Kappa Separator KS2/3 flame cutting table + Mykron Fine dust filter

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 484367, Granges automatic welding line for I-beams Dksdpfxsuy R Spe Ag Djk

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20515021, table length: 6,000 mm, table width: 2,500 mm, Equipment and features: Dodpfxeu Rnkws Ag Dokk Power supply PRECISION PLASMARC 400 Cutting heads 2, of which the cutting head is manually reversible Lower cutting table dimensions 2,5 x 6 m Equipment: - heat recovery and flue gas suction system included in the shop The machine is in good condition, current and can be inspected when running. The machine is located in Varkaus.