Used End Matching Machine for sale (67,688)

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm Psdpfoxwp A Hex Adzera With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: new, Year of construction: 2024, functionality: fully functional, Clamping range 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Speed of the tool carrier unloaded 150 rpm, nominal 70 rpm Clamping with wrench Prsdpovr Ec Aefx Adzea Tool feed by hand Weight approx. 6.5 kg Incl. operating instructions In wooden box Incl. 1 planing knife 90 ° and 2 chamfering knives 30 °

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. Podpfx Asu Utzyedzora The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Year of manufacture: 2017 Pedpsy H U Upefx Adzera Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: excellent (used), IM Very good condition. Prjdpfov Air Asx Adzja

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used Pjdpsyzc Iasfx Adzjra The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: new, Year of construction: 2020, End Milling Machine – Pertici ML200A - Brand new – Year 2020 The ML200 by Pertici Industries is an automatic vertical-axis end milling machine designed for processing aluminium and PVC profiles. Pedjy N S Uljpfx Adzora The machine allows machining operations with angles from 90° to 22.5° and from 90° to 157.5°, ensuring precision and reliability during end milling operations. Heavy-duty electro-welded steel structure with high-rigidity cast iron bench, complete with sliding milling unit on precision-ground guide rods. Equipped with: Quick pneumatic cutter change system Lubrication system 5 pneumatic clamping cylinders Three-phase motor 1.4 / 1.9 kW – 1400 / 2800 rpm Oil-pneumatic feed system for the milling unit Adjustable feed speed Profile support with vertical and horizontal clamps Anti-vibration feet User and maintenance manual Ideal machine for professional aluminium and PVC window and door manufacturing. Technical specifications: Motor power: 1.4 / 1.9 kW Power supply: 400V – 50Hz – Three-phase Motor speed: 6700 / 3350 rpm Maximum tool diameter: Ø 250 mm Tool bore: Ø 32 mm Maximum profile height: 130 mm Maximum profile width: 350 mm Maximum machining height: 145 mm Required air pressure: 6 – 7 bar Air consumption: 30 L/min Machine dimensions: Length (a): 1020 mm Height (b): 1700 mm Depth (c): 1410 mm Weight: 310 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Year of manufacture: 06/1994 Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Podpfxsy D A Hne Adzjra Condition: Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Special features: High-quality machine made in Sweden Excellent build quality Industrial-grade design

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 4,250 mm, power: 19 kW (25.83 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 147 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 3,600 mm, Equipment: documentation/manual, 38x2mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Easy to use with 17 inch computer. Predpfx Adovurm Hezsa The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts

Condition: excellent (used), functionality: fully functional, 1 x Blendtherm sauce cooker. All s/s. With full process control. Steam jacketed, front end discharge, with side wall scrape mixing action. Internal dimensions approx: 1.5 m x 750 mm x 600 mm. Overall dimensions: 2.5 m x 1.1 m x 1.8 m high Prsdpfovxgy Aox Adzja

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Feed of the milling head manually - Work table height adjustable via handwheel Prodpfxsf E Hige Adzoa - Horizontal and vertical material clamping - Milling cutter diameter up to 250 mm - Max. milling height 150 mm - Max. milling depth 80 mm - Max. milling length 305 mm - Angle-adjustable stop, left and right 20 - 90° - Milling spindle speed 4500 rpm - Drive 400 V, 3.2 kW - Compressed air connection 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table stand - Space required approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: used, Year of construction: 1995, SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - Volt. 380/50 - S/N 333 Prodpfemxfhmox Adzja - Year 1995

Year of construction: 2016, condition: used, Serial no. 15-3599B, primarily comprising: feed station with 2 product lines, continuous cycle conveyor, 2 forming stations, turning station, micro-lubrication station, through-feed washing machine, Manufacturer: Bous, Model: Duwamat K1000 WSST, Year: 2016, Serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16–24°, fine filter, oil separator, control cabinets, system control with operator panel, Manufacturer: Siemens, Model: SIMATIC HMI touch, inspection system with 2 cameras, Manufacturer: KEYENCE, Model: Vision System, eddy current testing device, Manufacturer: Rohmann, Model: Elotest IS500, laser marking system, Manufacturer: Videojet, Model: 7510, fiber laser, laser power 50 W, discharge station, roller conveyor system for crate removal, 2 product lines, satellite terminals, switch cabinets, safety devices, plexiglass enclosure, peripheral units, including extraction system, Manufacturer: ESTA, Model: Whispersog 2.2 JET, overnut feeder with loading bunker, vibrating bowl feeder, separation unit, loading station, set of trolleys, set of load carriers, trolleys. Pjdpfx Ajy A Ih Usdzsra Subject to prior sale.

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min TRB Roller conveyor 7000 mm with V Type Construction in height adjustable Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width 2200 mm Predpfxorr Ungo Adzea height 1700 mm weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine Prsdpfxjcx T E Re Adzea -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Psdpey Uuw Tsfx Adzora Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available. Psdpfxexdr Swe Adzjra

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Podpfx Adjn Sm Ddszera Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Condition: ready for operation (used), Year of construction: 2009, ERCOLINA MB 42 / Mandrel-less pipe bending machine -CE marking -Year of manufacture: 2009 Pjdpfoznm Nfsx Adzera -Bending capacity / steel pipe: 42.4 x 3 mm -Max. pipe diameter, aluminum / copper: 54 x 2 mm -Bending capacity, furniture construction pipe: 48 x 1.5 mm -Solid material up to 30 mm -Max. bending angle: 210 degrees -Electronic control with digital display -Max. 30 program memory slots -Programs with 9 bending operations -Overload protection / Yes -Operation: Dual foot pedal (bending - return) -Max. bending speed: 2 bends/min -Includes 1 tool -1.1 kW -Foot switch -Documentation Dimensions: L x W x H 0.5 x 0.6 x 1.2 meters / Weight 100 kg Errors and omissions excepted.

Condition: used, Year of construction: 1999, sheet width 2050 mm Prsdpeztfxiefx Adzsa plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t

Condition: excellent (used), Year of construction: 2021, ŞAHİNLER PK-35 Motorized Profile Bending Machine - 2021 - 1.5kW *Description:* For sale: motorized roller bending machine, brand *ŞAHİNLER*, model *PK-35*. *Features:* - *Year*: 2021 - Serial No.: 296208 - *Motor*: 1.5 kW - *Power Supply*: 400V Three-phase - *Application*: Bending tubes, profiles, flat bars, angle irons - *Controls*: Control panel with emergency stop + Foot pedal - *Condition*: Very good condition, 2021 machine, little use Psdpjzr Rcdjfx Adzjra Ideal for metalworking, locksmithing, glass structures, gates, and boiler making. Reputable Turkish brand, very robust. Rollers included.

Condition: ready for operation (used), 3-Roll Round Bending Machine HAEUSLER Type KRMA 2500x10m -Both lower rolls with motorized adjustment for bending and conical bending / hinge bearing for removing the sheet metal -Number of rolls: 3 -Drive: electric -Top roll: can be swung out for removing the workpiece Pedpfxeztaa Uo Adzsra -Operation: separate control panel -Max. sheet metal thickness (steel): approx. 10 mm -Working width 2500mm -Top roll diameter approx. 220mm -Lower roll diameter approx. 220mm -Stroke of the lower rolls approx. 220mm Dimensions: LxWxH 4.8x1.5x1.6 meters / Weight 6500 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 024.0468, Offer 22569 Prodpfxep Atvmj Adzoa Technical data: - max. working width 2040 mm - max. material thickness 2 mm - bending angle approx. 0 - 135 ° - motorized stroke upper beam - max. stroke upper beam 85 mm - max. adjustment bending beam 80 mm - manual bending process is supported by eccentric weight - connection 400 V - space requirement approx. W 3700 x H 1250 x D 450 mm - weight approx. 1700 kg

Condition: good (used), Year of construction: 2019, *Title:* SAY-MAK SPK-35 Motorized Profile Bending Machine - 2019 - 0.75kW *Description:* For sale: motorized roller bending machine, brand *SAY-MAK*, model *SPK-35*. *Features:* - *Year*: 2019 - Serial No.: 290367 - *Motor*: 1.5 kW - *Power Supply*: 400V Three-phase Prjdpezr Rcwofx Adzsa - *Weight*: 400 kg - *Application*: Bending round/square tubes, flat bars, angles, profiles - *Controls*: Foot pedal + Emergency stop - *Condition*: Very good condition, 2019 machine Perfect for metalwork, locksmithing, railings, canopies, and boiler making. Robust machine, from a renowned Turkish brand. Rollers included.

Condition: excellent (used), Schröder ASK segmented folding machine The machine is equipped with: ✅ a foot pedal for single-operator control ✅ segments in the upper beam, lower beam, and bending beam ✅ segment height of the upper beam: 11 cm ✅ bending capacity: 1 mm steel sheet Condition: Podpfx Asy Dz Sijdzora • with new dampers in the upper and bending beams • very good technical condition • very good visual condition • Immediately available, no lead time • Weight: approx. 500 kg Inspection and test run possible by appointment.