Used End Finishing Machine for sale (95,570)

Condition: excellent (used), functionality: fully functional, In addition to the machines mentioned and shown, we have many other machines and accessories (blast systems, conveyors, and small machines) available from stock. The machines can be purchased or rented. Contact us for (free) advice in the field of vibratory finishing, tumbling, and blasting technology. Ljdpfswfdbcox Aa Esak

Condition: good (used), Cutting / Centering Machine UMA SZM 100 E Year of manufacture: 1976 Serial No.: 33-0241 Clamping range: 10–160 mm Diameter for facing up to 100 mm Clamping length: 90–1950 mm Drill spindle: ISO40 DIN2079 2 clamping fixtures - Special program for internal threading with reverse feed and spindle reservation as a second program in automatic mode Laodpfx Aaext Dzps Esk - Automatic triple chip-breaking for deep drilling - 2-edge positive tool head with 12H7 keyway for overcutting holders with 2 carbide indexable inserts SPGN 190 (DIN4968), with holder for centering drill R4.0 mm The machine was in use until recently and is fully operational. Price: net, ex stock, loaded.

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Lajdpfx Ajxq Hknoa Eok Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m Lodpfx Ajri Sicja Eeak

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis stone CNC machine for edge finishing/ tap and sink holes - fits BT40ER40/80 - 15 tool holders included - vacuum pump included - including automatic zero point determination via compressed air cylinders - excluding water installation - control cabinet dimensions 900x600x1800 mm Lajdpov Dulqsfx Aa Eok

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm Ljdpfx Aoxdfaboa Ejak

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Ledpsxmlinsfx Aa Eeak

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, TECHNICAL DETAILS Minimum dimensions for double-sided machining: Diameter 12 mm, Length 200 mm Maximum dimensions for double-sided machining: Diameter 50 mm, Length 800 mm Minimum dimensions for single-sided machining: Diameter 12 mm, Length 75 mm Maximum dimensions for single-sided machining: Diameter 70 mm, Length 500 mm Cutter diameter: max. 140 mm Tool holder: SK40 Workpiece clamping: Hydraulic centering vice Laedexxkd Iopfx Aa Eok MACHINE DETAILS Performance Data Power: 24 kW Voltage: 400 V Frequency: 50 Hz Max. pressure: max. 120 bar EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Laedpoxqrg Isfx Aa Ejk Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), WALTHER TROWAL - Type CA 340 - Speed range: 800 - 1500 rpm - Drive power: 7.5 kW - Separation unit - Acoustic enclosure cover - Controls / Start / Stop / Timer / Separation Ljdpfx Aaoxtbido Eoak Dimensions: LxWxH: 1.8 x 1.6 x 1.8 meters / Weight: 1300 kg Errors and input mistakes excepted

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm Laodow Nxkfepfx Aa Eok *

Condition: good (used), Manufacturer ITALMECCANICA Model MECPOWER 4TB/1600 Year Feb-06 No. A11 Passage width 1600 mm Sanding group 4 Passage height 130 mm Grinding group 2 rollers Minimum workpiece length 400 mm Upper group 2, lateral group 2 Edge sanding yes Length 3300 mm Width 2450 mm Height 2250 mm Power 11kW Supply 3P+N+PE Weight 2500kg Lasdpfx Aaexivids Eek

Condition: new, Year of construction: 2025, Notch milling machine AKF125M Lasdpfx Ajxtbp Roa Esk For corner milling of plastic and aluminium profiles With quick-change milling cutter system. Simple handling and perfect results.

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % Lajdpfoqhquwox Aa Eok _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition Ljdpfx Aasxfwflo Eeak and can be inspected under power by appointment. Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Ljdpfx Aaolrt Saj Esak Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left Lsdpfx Ajid Iymea Esak To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: used, Tube End Forming Machine, T-Drill SP-110, Used Machine Manufacturer: T-Drill Ledpfxoxu E Duo Aa Eeak Model: SP-110 Operation: Uncertain Overall Dimensions: Width: 930 mm Depth: 1520 mm Height: 1460 mm Weight: 600 kg Year of Manufacture: 2016 Air Pressure: 6 bar Electrical Data: 480V; 18.5 kW; 3x80A The T-DRILL SP-110 is a fully automatic tube end spinning machine capable of closing, reducing, and expanding primarily copper and brass tubes — typical applications include HVAC, refrigeration, and mechanical fittings. Technical Data (Summary): Tube diameter range: Ø 8 – 108 mm (≈ 5/16” – 4-1/8” O.D.) – T-Drill Oy Maximum reduction: 70% – T-Drill Oy Materials: primarily copper and brass (as highlighted in the manufacturer’s description) – T-Drill Oy Wall thickness / maximum wall thickness (according to used machine listings): e.g., one listing indicates 0.125" (≈3.2 mm) maximum wall thickness (depends on model/configuration) – Southern Fab Sales Machine features: automatic clamping, rotation + forming tools (tooling/dies), suitable for forming long or complex tube ends. Capable of closing, flattening, reducing, and expanding tube end geometries; the manufacturer’s brochure contains detailed shapes and examples. Especially suitable for HVAC and industrial refrigeration tubes.

Condition: new, Year of construction: 2025, End Milling Machine AKF125M/125P Lasdpfx Aaexta Npe Esk For end milling of plastic and aluminium profiles With quick-change cutter set device. Easy operation and perfect results.

Condition: used, Manufacturer: Carl Kurt Drum diameter: 700 mm Lasdpfx Aasu Abr Ee Ejk Motor: 1 kW

Condition: good (used), Year of construction: 2013, E.Büker - Type N76 End Finishing Machine / Beveling Machine Ledexnlnmspfx Aa Ejak - Working range: 6 - 76 mm - Speed: 10-1800 rpm - Power: 0.75 kW - Base frame - Emergency stop Dimensions: LxWxH 0.7x0.5x1.4 meters / Weight 250 kg Errors and input mistakes excepted

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Lodpjghl Emjfx Aa Eeak Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Year of construction: 2016, condition: ready for operation (used), Various sewing and joining machines for upper finishing in the shoe manufacturing industry are available. 1) Plastic and leather welding machine Pfaff 8304-04247, year of manufacture: 1999, max. temperature: 700°C, max. welding speed: 20m/min, machine dimensions X/Y/Z: approx. 1150mm/750mm/1400mm, weight: approx. 130kg. 2) Heel closing ironing machine Elettrotecnica 443/V, year of manufacture: 2013, max. temperature: 180°C, heating time: 30s, machine dimensions X/Y/Z: approx. 1000mm/600mm/1350mm, weight: approx. 180kg. 3) Repair sewing machine Global SR 9929, year of manufacture: 2012, max. sewing speed: 2000stitches/min, max. stitch length: 8mm, presser foot lift: 14mm. 4) Flat ironing press Global WJ-62, year of manufacture: 2016, max. temperature: 200°C, heating time: 60s, working area X/Y: 380mm/380mm, weight: approx. 60kg. 5) Overlock machine Pfaff 918-49, needle: 1, threads: 3, stitch length range: 1mm-4mm, presser foot lift: 10mm, max. sewing speed: 4000stitches/min. 6) 2x rotary table ironing machines Sabal M 108-A, year of manufacture: 2014, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 300kg. 7) Strobel machine Strobel KL141-23, sewing system: single-needle chainstitch, stitch length range: 3.5mm-7mm, max. sewing speed: 1800stitches/min, weight: approx. 50kg. An on-site inspection is possible. Lajdpfx Aoxnp R Esa Esk

Condition: new, The tube linishing / satin finishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes. The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes. The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality. Minimum tube vibration even on the biggest lengths: With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems. Lasdped Hfnbefx Aa Eok Straight or curved tubes polishing: ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually). Quick set-up: Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Oval tubes: Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100 Finishing after tube drilling: Maximum adaptability of the abrasive belt to holes or graps in the material surface. Technical Details - ML100: Working capacity (Ø mm) 10 - 114 No. Stations 1 Abrasive belt dimensions (mm) (2x) 50x940 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kw) 3 Wheel motor (kw) 1.5 Feeding motor (kw) (2x) 0.12 Total power (kw) 5 Consumption (A) 11 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench Lodpfexwp A Hsx Aa Esak • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box