Used Emco Fb 2 for sale (134)

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Nsdpfxoxp Hudj Aqwoda

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Nedoxzq Ncjpfx Aqwoda Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 340 mm turning dia. over face-slide: 158 mm turning length: 300 mm facing movement (x-axis): 300 mm longitudinal traverse (z-axis): 300 mm control: Siemens 810T revolution per minute: 60 - 4.000 U/min max. torque on the spindle: 106 - 145 Nm external spindle dia. in forward position: 80 mm feed motor: 8500 N rapid motion - x-axis: 6 m/min tool turret - number of stations: 8 tailstock adjustment: 120 mm Ndodoylt Nzjpfx Aqwea Main spindle capacity: 11/15 kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 20 KVA

Condition: used, functionality: fully functional, very good condition Ndsdpfoymnkvjx Aqwja

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm Nedpfox Aq Hwsx Aqwjda spindle turning speed range: 0-6.300 U/min

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,848 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details. • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, nominal current 50 A, largest load current 30 A, breaking capacity 16 kA • Protection grade: IP54 Ndsdpeywyq Dsfx Aqwsa • Electrical cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filtration unit visible) Additional equipment • Chip conveyor • Wired electronic handwheel • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted electrical cabinet cooling unit (Rittal) • Nikken rotary table Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2018, Rod diameter: 10 – 65 mm Njdpfxjzkwcne Aqwjda Maximum rod length: 3,000 mm Multi-track material support

Year of construction: 2001, condition: excellent (used), machine/vehicle number: R2D P1503, Spindle Ø (tong passage): 32 mm Max. Turning Ø: 140 mm Distance between the spindle noses: 720 mm Main spindle, mounting acc. To DIN 55026: KK 4 Passage in the draw tube: 32 mm Counter spindle, mounting acc. To DIN 55026: KK 4 Travel z: 510 mm Travel speed: 24 m / min Main spindle drive, AC motor: 10 kW Infinitely variable speed range: 0 - 8000 rpm Ndjdpfef Ddafox Aqwja Counter spindle drive, AC motor, power at 40% ED: 10 kW Infinitely variable speed range: 0 - 7000 rpm Disk turret tool system with directional logic, 25 holders Number of driven tools: 12 Rotation speed of the driven tools: 0 - 6000 rpm electr. Connection: 400 V Weight approx .: 3000 kg Required space: 2600 x 1980 x 2350 mm

Condition: excellent (used), Manufacturer, Emco. Machine type, Hyperturn 665 CNC lathe. Inventory number, 22281. Machine designation, Drehmaschine Emco Hyperturn 665. Machine number, serial number R7A Q 2701. Year of manufacture, 2002. Control system, Siemens Sinumerik 840D with PCU 50 V1. Programming, DIN ISO, Siemens ShopTurn capable. Axes configuration, X axis and Z axis. Max turning diameter over bed, approx. 665 mm. Max turning diameter over cross slide, approx. 500 mm. Max turning length, approx. 1,000 mm. Swing diameter, approx. 665 mm. Main spindle. Spindle speed range, up to approx. 4,000 rpm. Spindle nose, DIN standard spindle interface. Spindle motor power, approx. 30 kW. Spindle torque, high torque for soft turning applications. Tool system. Tool turret, CNC controlled turret. Number of tool stations, typically 12 positions. Tool holder type, VDI standard. Ndjdpfx Aqex S Hghowoa Live tooling, not included, soft turning configuration. Tailstock, CNC controlled tailstock. Quill diameter, approx. 100 mm. Quill travel, approx. 120 mm. Coolant system, included. Chip conveyor, included. Machine accuracy. Positioning accuracy, approx. 0.01 mm. Repeatability, approx. 0.005 mm. Electrical supply data. Supply voltage, 400 V. Frequency, 50 Hz. Rated current, 110.00 A. Backup fuse, 125.00 A. Connected load, 56.00 kW. Compressed air requirement, approx. 6 bar. Machine dimensions. Machine length, approx. 4,500 mm. Machine width, approx. 2,200 mm. Machine height, approx. 2,100 mm. Machine weight, approx. 8,000 to 9,000 kg depending on configuration. Application, precision soft turning of steel, aluminum, and non hardened materials.

Condition: used, Emco F3 - Milling Machine Accessories: - Vice - Workplace lighting - Coolant system - Tools & machine feet - Operating manual Technical specifications: Nsdpjy A Sdyjfx Aqwsda Working area: - Longitudinal travel: 300 mm - Transverse travel: 200 mm - Vertical travel: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Swiveling vertical milling head: ± 90° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Slot spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: extraction bolt M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slide: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (stepless) - Rapid traverse: 1200 mm/min Coolant system: - Tank capacity: 30 l - Pump capacity: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% duty cycle) - Speed: 1400 / 2800 rpm Dimensions: - Dimensions W x H x D: approx. 1200 x 1900 x 1400 mm - Machine weight: approx. 450 kg

Condition: as good as new (ex-display), Year of construction: 2026, throat depth: 320 mm, total height: 620 mm, total width: 840 mm, total length: 850 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 200 kg, height adjustment type: mechanical, DuraVision 30 G5 small load/macro hardness testing machine for Brinell, Rockwell, and Vickers testing, conforming to standards Ndsdpfx Aqozfnpbswsa according to EN ISO and ASTM, as well as carbon testing according to DIN. Torsionally rigid gray cast iron base for the main load range 3 kg - 3,000 kg (29.43 N - 29,420 N) PLC measuring and control electronics for monitoring the application of the load with automatic test load change and manual table height adjustment via handwheel 12MPix color camera for 3-stage zoom Motorized pivoting 3-position turret incl. 1 objective lens and 1 indenter adapter Removable clamping jaws with clamping inserts enable unclamped and clamped testing Test height 0 - 400 mm, outreach 320 mm Specimen table, support diameter 90 mm Maximum specimen weight 200 kg High-performance LED incident lighting Capacitive 10" touch display with LED backlight Integrated PC with Win 10 IoT 64-bit and 128 GB SSD storage Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 ecos Workflow Touch Basic operating software incl. 1 test method ecos IMAGE for fully automatic, standard-compliant image analysis of Vickers, Knoop, and Brinell Automatic brightness control and autofocus with statistics and test report function ecos templates for frequently used settings ecos CODE for reading and creating QR codes ecos EXPORT EDITOR for individual customization of the export data (format: PDF, Excel, XML, CSV) User management for individual customization of access rights in ecos Workflow Touch ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Note: An additional hand scanner is required to read a QR code (not included in the scope of supply). NKW28E05Z Ball holder 28 mm length, diameter 6.5 mm with 5 mm ball press-fitted in with certificate (EN ISO) NKW28E10Z Ball holder 28 mm length, diameter 12 mm with 10 mm ball press-fitted in with certificate (EN ISO) L25HBDVG5 Objective lens 2.5x with Brinell SmartLight evo incl. adapter for turret for better evaluation of Brinell indentations (for DV 20/30/200/300/250/350 G5) Z46ZR Base / tool cabinet ZRG for seated and standing use max. specimen weight 500 kg Dimensions (WxHxD): 840 mm x 620 mm x 850 mm Maximum load / drawer: 10kg Best regards

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810D, workpiece height (max.): 190 mm, total height: 2,450 mm, total width: 2,400 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, overall weight: 2,900 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 12, tool weight: 5,000 g, positioning accuracy: 0.004 mm, product length (max.): 2,300 mm, number of axes: 3, This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us. • 2x units available (one newer and one older) with different Control Brands • Distance from Spindle Nose to Table: 210 – 450 mm • Number of T-Slots: 3 • T-Slot Width: 14 mm • T-Slot Spacing: 100 mm • Spindle Bearing Diameter: Ø60 mm • Bearing Type: Angular Contact Ball Bearing • Tool Taper: SK40 (DIN 69871 / ISO 7388-I) • Pull Stud: M16 (DIN 69872 / ISO 7388-II) • Automatic Tool Clamping • Tool Clamping Force: 6,000 N • Spindle Overhang: 330 mm • Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle) • Optional Spindle Speed: 0 – 8,000 rpm • Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option) • Noise Level: 72 dB(A) at 5,000 rpm • Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min • Maximum Drilling Capacity in Steel: Ø25 mm • Maximum Tapping Capacity in Steel: M20 • AC Servo Drives with Ball Screw Spindles • Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min • Rapid Traverse (X/Y/Z): 12 m/min • Feed Force X/Y: 6,000 N • Feed Force Z: 8,800 N • Resolution: 0.001 mm • Tool Carrier: Drum Type with Direction Logic • Automatic Tool Changer • Maximum Total Tool Weight in Magazine: 36 kg • Maximum Tool Diameter: 100 mm • Maximum Tool Length: 220 mm • Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s • Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s • Coolant Tank Capacity: 100 L Nedpfx Ajya Hg Neqwoda • Coolant Pump Flow Rate: 10 L/min • Maximum Coolant Pressure: 3.7 bar • Coolant Supply: 4 External Nozzles • Automatic Central Lubrication for Guideways and Ball Screw Spindles • Grease Lubricated Main Spindle Bearings • Power Supply: 3/PE ~ 400 V / 50–60 Hz • Maximum Voltage Fluctuation: +5% / -10% • Connected Load: 15 kVA • Rated Current: 22 A • Maximum Current: 25 A • Main Fuse: 35 A (Slow-Blow) • Required Short-Circuit Power: 1600 kVA • Pneumatic System Pressure: 5 – 10 bar • Minimum Air Flow: 750 L/min • Average Air Consumption: 180 L/min Additional Equipment • Automatic 12-Position Tool Changer • Automatic Central Lubrication System • Coolant System with 4 External Nozzles • Automatic Tool Clamping System • SK40 Spindle Interface Machine Benefit: • Reliable 12-Station Automatic Tool Changer • Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1998, • CNC machining centre Emco, Type VMC 600, year of manufacture 1998 Ndedpfx Aoyucbfsqwoa • incl. handwheel + 3 vices with clamping devices

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar Ndodpfx Aqoxz Ab Rewoa 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R7 A-Q-2701, Used CNC lathe Nedpfx Aox Tbcyjqwsda Manufacturer: EMCO Model: Hyperturn 665 Year of manufacture: 2002 Control: 840 D With chip conveyor

Condition: used, Year of construction: 2005, Technical details: turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm turning length: 700 mm Ndjdpfxox Apd Uj Aqwja spindle bore: 50 mm spindle turning speed range: 40 - 3000 U/min total power requirement: 6 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 2 x 1 x 1,6 m

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Working Area Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Max. table load: 100 kg Table – floor distance: 880 mm Ndedpfsxa Arajx Aqwsa Spindle Speed range: 50 – 10,000 rpm Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h EQUIPMENT 30 holders 2 Gressel vices Note: The machine will remain powered until 21.09.2025.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,261 h, functionality: fully functional, machine/vehicle number: M-077.084.07, empty load weight: 4,800 kg, Equipment: chip conveyor, MACHINE DETAILS Weight: 4,800 kg Operating Hours Spindle hours: 11,261 h Control system on hours: 125,668 h EQUIPMENT Ndodpfx Aqexpvwzowea Conveyor belt (FAMUP 405-1498-1, 352 kg)

Condition: good (used), turning diameter over bed 280 mm Ndjdpfxeyz Dg Re Aqwea turning diameter over slide rest 170 mm turning length 600 mm weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min total power requirement 1,4 kW dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 430 mm turning dia. over face-slide: 210 mm turning length: 510 mm facing movement (x-axis): 150 - 160 mm longitudinal traverse (z-axis): 300 - 510 mm control: Fanuc 21T revolution per minute: 6300 U/min max. torque on the spindle: 17,5 Nm external spindle dia. in forward position: 45 mm tool turret - number of stations: 8 Main spindle capacity: 11 kW electrics - voltage/frequency: 400/50 V/Hz total power requirement: 17 KVA Ndjdeyw Hmfjpfx Aqwsa Weight approx.: 2,4 t dimension machine approx.LxWxH: 2,2 x 1,4 x 2,0 m The EMCO TURN 345 is a compact, high-performance CNC lathe designed for the precise machining of individual parts as well as small and medium batch production. It is characterized by its robust construction, high reliability, and ease of operation. Equipped with the proven Fanuc Series 21-T control system, the machine offers precise and stable process control as well as simple programming using standardized G-code. Interface for bar feeder available *

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Nedovt Amuepfx Aqwoda Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours - Year of manufacture: 2004 Technical data Working area: - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm Nedpfxozl D Awj Aqwjda - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: - Dimensions W x H x D: 2300 x 2450 x 2400 mm - Weight: approx. 2900 kg

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Ndodpfexmkcaex Aqwoa

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) Nsdju N Avxjpfx Aqweda *

Condition: good (used), Year of construction: 1998, operating hours: 28,500 h, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 5,000 rpm, VMC 300 Siemens 810D control SK40 12 tool positions Position 1 is defective Ndodpfx Aqewlpb Uswoa in good condition Fully functional