Used Electronic Bench Scale for sale (11,270)

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic Prjdpfexy Hr Rjx Aa Esf -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/280/H300 mm -Weight: 7.2 kg

Condition: used, This listing is for the Eppendorf xplorer plus electronic pipette The unit is in full working condition and is ready for immediate use Eppendorf Xplorer™ Plus Electronic Pipette – Single Channel The Eppendorf Xplorer™ Plus is an advanced electronic pipette designed for simplicity, precision, and reproducibility. This innovative pipette facilitates a wide range of intelligent applications such as aspirating, diluting, sequential dispensing, and reverse pipetting, ensuring enhanced productivity and flexibility in the laboratory. It helps eliminate delays caused by complicated programming or inflexible processes, allowing for more efficient workflows. Key Features: Multifunctional Rocker: The “Up is up and down is down™” principle for intuitive operation, along with easy function selection via the practical selection dial. Intuitive Interface: Operate in your preferred language with a clearly arranged color display and no sub-menus. The integrated help function ensures that guidance is always available when needed. Innovative Rocker: When the tip is ejected, the piston automatically returns to its zero position, ensuring smooth operations. ON/OFF Switch: The pipette automatically switches off during longer periods of inactivity to preserve battery life. Advanced Applications: Additional functions such as aspirating, diluting, sequential dispensing, and reverse pipetting enable more complex processes with ease. One-Time Programming: Save your programming sequences for faster handling of complex pipetting tasks. Fixed Volume Settings: You can save your desired volume settings for quicker access during repetitive tasks. Password Protection: Secure your pipette settings with password protection to prevent unauthorized changes. Individual Speed Settings: Adjust the speed parameters to your individual working pace. Maintenance Reminder: Set reminders for pipette maintenance based on time or frequency of use. Reproducibility: Consistently reproducible results with volume and speed adjustments that remain precise and reliable. Ergonomic Design: PhysioCare Concept™ reduces weight and improves balance, offering an optimally angled pipette head for better comfort and ergonomics. Spring-loaded tip cone ensures a secure fit, providing maximum tightness. Clear Display: The high-resolution color display enhances visibility, ensuring that parameters are clearly visible at all times. Applications: Pipetting: Liquids (manual and automatic) Dispensing: Timed and manual dispensing Prsdoxv Di Sjpfx Aa Ejf Pipetting and Mixing: Ensures thorough mixing of liquids in addition to accurate pipetting

Condition: used, Colombo dowel boring machine Pjdpfx Aox Dnl Tja Esrf 2 vertical axes, 11 kW each 2 dowel heads, 3 kW each Weight 3500 kg 35 kW, 400V/50 Hz Year of manufacture 2001

Condition: ready for operation (used), Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Prjdpfx Aaox A Izlo Esf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2230x720x280 mm Weight 135 kg Podpfev A Hxmox Aa Ejrf Total power requirement 0 kw

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Prsdox A Safopfx Aa Ejf Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine Podpfx Aasxy Hqaj Esrf -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/270/H330 mm -Weight: 8.6 kg

Year of construction: 2025, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Prjdpfxec Uydas Aa Ejf Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: like new (used), Year of construction: 2018, 1 x bench drill Psdpfox Nbmdex Aa Eerf Flott TB 10 Eco Year of manufacture: 2018 In like-new condition. (Further photos and description to follow)

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Predpfx Asvtp Uxoa Esf Length: 12 m Materiel Thickness: Cut up to 40 mm

Condition: used, Year of construction: 2000, Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC Control: Heidenhain 426 Completely overhauled in 2022 Report available Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Pjdpfxox A Ayio Aa Ejrf Table length: 2,200 mm Table width: 1,800 mm Clamping surface: 1,800 x 1,600 mm Table load: 12 t Number of tool stations: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic covers completely overhauled with new wipers. Dimensions (LxWxH approx.): 7,500 x 6,950 x 4,000 mm Weight: 40 t.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SY390-156, total height: 1,985 mm, overall weight: 15,800 kg, total length: 5,470 mm, total width: 2,100 mm, input voltage: 380 V, sheet thickness steel (max.): 30 mm, controller manufacturer: Knuth, controller model: Knuth, power: 22 kW (29.91 HP), working width: 3,000 mm, roller (bottom) diameter: 360 mm, roller (top) diameter: 390 mm, roller length: 2,600 mm, sheet thickness (max.): 30 mm, side roll diameter: 300 mm, control type: PLC-controlled, degree of automation: semi-automatic, number of rollers: 4, number of digital displays: 1, actuation type: hydraulic, Equipment: CE marking, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, The machine is new and has never been used. List price is €114,300. It was purchased for a client who no longer wanted it. RBM 25/40 Hydraulic Plate Rolling Machine Standard Equipment: - 4 hardened rolls - Conical rolling device - Digital display for side rolls - Separate control panel - Operating manual Technical Description: - Heavy-duty frame with contemporary, rigid construction - Hydraulic clamping bearings for easy material feed - Roll movement, parallelism, and cone adjustment are all controlled from the operator panel - All rolls are induction-hardened and precisely mounted in high-quality bearings - Upper and lower rolls are powered by independent hydraulic motors - Hydraulic components supplied by Parker and Bosch - Electrical components supplied by Siemens and Telemecanique - Minimum bending diameter: 3 × upper roll diameter Technical Specifications: Pjdsxdcxbepfx Aa Ejrf | Parameter | Unit | Value | |-----|-----|----- | | Working length | mm | 2,600 | | Max. plate thickness (at 240 N/mm²) | mm | 30 | | Max. pre-bending thickness | mm | 25 | | Number of rolls | pcs | 4 | | Upper roll diameter | mm | Ø 390 | | Lower roll diameter | mm | Ø 360 | | Side roll diameter | mm | Ø 300 | | Main motor power | kW | 22 | | Machine dimensions (L × W × H) | mm | 5,500 × 2,100 × 2,000| | Net weight | kg | 15,800 |

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable Pedpfsxy Hnfex Aa Eerf -Voltage: 220 V 40 W -Dimensions: 550/280/H300 mm -Weight: 8.4 kg

Condition: excellent (used), Year of construction: 1992, Technical data: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm - Weight approx. 70 kg Location: ex stock 54634 Bitburg Predpewq Ea Rjfx Aa Esf - available immediately -

Condition: excellent (used), Kübrich Kübrich test systems 48V belt starter generator - component test bench Details of the test stand: (see Fig. 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Switch cabinet (5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O (6) MP2: Switch cabinet with Simotion (7) MP4: Switch cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended use: The test stand is used to carry out tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current intensity: 330 A (short term, less than 1 s) Control voltage 24 V Mechanical performance data according to the data sheet of the load machine A transmission ratio of 1:2 to the test specimen shaft must be observed. Speeds: Prjdpeumv Emjfx Aa Esf Load machine: Set-up mode: 0 - 50 1/min Automatic mode: 0 - 10 000 1/min Test specimen motor: Set-up mode: 0 - 100 1/min Automatic mode: 0 - 20 000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Straight-Cut Cutting Bench 40, manufactured by MEP Number of bars: - n.1 Ø 40 - n.2 Ø 32 - n.3 Ø 26 - n.4 Ø 20 - n.5 Ø 16 22 Fy= 600 N/mm - ft= 650 N/mm Minimum cutting length: 800 mm Prsdpfxsvtx Eye Aa Esf Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5 Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5

Condition: good (used), DIGI SM-5500B System Scale SM-5500B, the advanced PC-based system scale printer that provides you with multiple retail solutions. Increases operational turnover, improves operations with integrated queuing and collection system through various innovative features of SM-5500B. Experience true retail solutions offered by DIGI's PC scales. - Linerless printing with integrated automatic cutter - Watermark printing - Speed ID - InfoTag and electronic signage e.Label - Integrated queuing and collection system Predpfx Aek Shm Tea Eef - Waste management - Interactive screen display Power source 230 V (50/60 Hz.) Operating humidity 15% - 85% RH Non-condensing Operating temperature -10° C to +40° C Operator Display 12.1" Customer display 7 "WVGA (800x480) Interface RS232C, Ethernet (standard) max. 15/30 kg, min. 100g, e = 5/10g, dimensions (in mm) 385(W) x 507(D) x 148(H) Item condition: used Photo is purely indicative More items - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. Prodpfjd Nviqox Aa Eof VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 580/280/H370 mm Predjxy Hlwepfx Aa Ejf -Weight: 7.8 kg

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Condition: gebraucht / used Sale ex location! Scope of delivery: (see picture) Prjdpfou Aa A Aox Aa Eef (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. Prodpfx Aaeg Urn Es Eof With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) Pedpfjfnm Dqex Aa Eerf We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), EDAG EDAG Huf endurance test bench Purpose: This test bench is intended exclusively for testing parts that are capable of rotational and/or translational movement Psdpfjvx S Apox Aa Ejrf as part of an endurance test and within the limits of the following technical data. Technical data: Dimensions: width 1565 mm x depth 615 mm x height 1655 mm Weight approx. 450 kg Operating voltage 400V /50Hz Control voltage 5, 24 Provisional fuse 16 A Test device: Maximum stroke 194 mm Maximum axial force 500 N Maximum moment 5 Nm Break-out force (manually operated slide) 15 N Displacement force (manually operated slide) 10 N Other equipment Ρ4, 24" TFT monitor (1900 X 1080) Operating system Windows XP Measurement and control software LabVIEW 2011 PC plug-in cards 1 card, NI PCI-6251,1 card, N1 PCI-7044 Drawer 500 mm (fully extended with automatic closing) Additional load 500 N Drawer cabinet, lockable 3 drawers The teach-in endurance test bench is a device for carrying out endurance tests On test objects that can rotate and/or move translationally, e.g. cylinders Locks, door handles, key functions. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Lindner Bursting Test Stand Here we offer a Lindner burst test stand. AGB Bursting Test Stand TMM4 Technical data: AGB Bursting Test Stand TMM4 Year of manufacture 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5,5 kW Temperature range chamber: RT ... 180°C Temperature range medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: glycol / water Heat transfer oil Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x 2160 mm Pedslx A T Djpfx Aa Eorf Operating voltage: 3/N/PE AC 400V +/-10% 50Hz power: 5,5kW rated current: 8A Back-up fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY For the commissioning of the burst test bench the following items are necessary: Pump, cooling tower & fire alarm panel these are not supplied. Type: AGB burst test rig TMM4 weight approx. 705 kg Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Pedpfx Ajiu H Hcsa Ejrf